3D Model
Open in new tab ↗
Loads when you scroll to it. Unloads after 5 minutes in the background.
Symbol & Footprint
Schematic Symbol
Open full view ↗Loads when you scroll to it. Unloads after 5 minutes in the background.
PCB Footprint
Open full view ↗Loads when you scroll to it. Unloads after 5 minutes in the background.
Datasheet
Open in new tab ↗Loads when you scroll to it. Unloads after 5 minutes in the background.
README
markdownMKL04Z32VFK4
NXP Semicon · Pre-ordered MCUs · QFN-24-EP(4x4)
MKL04Z32VFK4 from NXP Semicon, in a QFN-24-EP(4x4). Pinout and pin descriptions extracted from the manufacturer datasheet (extract_pins, cross-checked by a second model); symbol, footprint, and 3D from KiCad-official CAD.
Pinout
| Pin | Name | Type | Function |
|---|---|---|---|
| 1 | PTB6/IRQ_2/LPTMR0_ALT3 | bidirectional | Default function is DISABLED; as GPIO PTB6 it is selected on ALT1 with IRQ_2/LPTMR0_ALT3, TPM0_CH3 on ALT2 and TPM_CLKIN1 on ALT3. |
| 2 | PTB7/IRQ_3 | bidirectional | Default function is DISABLED; as GPIO PTB7 it is selected on ALT1 with IRQ_3 and TPM0_CH2 on ALT2. |
| 3 | VDD / VREFH | power_in | VDD is the supply, with an operating voltage range of 1.71 to 3.6 V; VREFH is the high reference voltage, for which the text gives no numeric limits. The 24-QFN column assigns this pin number to both signals, see review_required. |
| 4 | VREFL / VSS | power_in | VREFL is the low reference voltage and VSS is ground; the text gives no numeric limits for either. The 24-QFN column assigns this pin number to both signals, see review_required. |
| 5 | PTA3 | input | Default function is EXTAL0, the crystal oscillator input; as GPIO PTA3 it is selected on ALT1, with I2C0_SCL on ALT2 and I2C0_SDA on ALT3. |
| 6 | PTA4/LLWU_P0 | output | Default function is XTAL0, the crystal oscillator output; as GPIO PTA4/LLWU_P0 it is selected on ALT1, with I2C0_SDA on ALT2 and I2C0_SCL on ALT3. |
| 7 | PTA5/LLWU_P1/RTC_CLK_IN | bidirectional | Default function is DISABLED; as GPIO PTA5 it is selected on ALT1 with LLWU_P1 and RTC_CLK_IN, TPM0_CH5 on ALT2 and SPI0_SS_b on ALT3. |
| 8 | PTA6/LLWU_P2 | bidirectional | Default function is DISABLED; as GPIO PTA6 it is selected on ALT1 with LLWU_P2, TPM0_CH4 on ALT2 and SPI0_MISO on ALT3. |
| 9 | PTB10 | bidirectional | Default function is ADC0_SE9; as GPIO PTB10 it is selected on ALT1 and TPM0_CH1 is on ALT2. |
| 10 | PTB11 | bidirectional | Default function is ADC0_SE8; as GPIO PTB11 it is selected on ALT1 and TPM0_CH0 is on ALT2. |
| 11 | PTA7/IRQ_7/LLWU_P3 | bidirectional | Default function is ADC0_SE7; as GPIO PTA7 it is selected on ALT1 with IRQ_7 and LLWU_P3, SPI0_MISO on ALT2 and SPI0_MOSI on ALT3. |
| 12 | PTB0/IRQ_8/LLWU_P4 | bidirectional | Default function is ADC0_SE6; as GPIO PTB0 it is selected on ALT1 with IRQ_8 and LLWU_P4, EXTRG_IN on ALT2 and SPI0_SCK on ALT3. |
| 13 | PTB1/IRQ_9 | bidirectional | Default function is ADC0_SE5/CMP0_IN3; as GPIO PTB1 it is selected on ALT1 with IRQ_9, UART0_TX on ALT2 and UART0_RX on ALT3. |
| 14 | PTB2/IRQ_10/LLWU_P5 | bidirectional | Default function is ADC0_SE4; as GPIO PTB2 it is selected on ALT1 with IRQ_10 and LLWU_P5, UART0_RX on ALT2 and UART0_TX on ALT3. |
| 15 | PTA8 | bidirectional | Default function is ADC0_SE3; as GPIO PTA8 it is selected on ALT1 and no other alternate function is listed. |
| 16 | PTA9 | bidirectional | Default function is ADC0_SE2; as GPIO PTA9 it is selected on ALT1 and no other alternate function is listed. |
| 17 | PTB3/IRQ_14 | bidirectional | Default function is DISABLED; as GPIO PTB3 it is selected on ALT1 with IRQ_14, I2C0_SCL on ALT2 and UART0_TX on ALT3. |
| 18 | PTB4/IRQ_15/LLWU_P6 | bidirectional | Default function is DISABLED; as GPIO PTB4 it is selected on ALT1 with IRQ_15 and LLWU_P6, I2C0_SDA on ALT2 and UART0_RX on ALT3. |
| 19 | PTB5/IRQ_16 | input | Default function is NMI_b (non-maskable interrupt input); as GPIO PTB5 it is selected on ALT1 with IRQ_16, TPM1_CH1 is on ALT2 and ADC0_SE1/CMP0_IN1 is on ALT0. |
| 20 | PTA12/IRQ_17/LPTMR0_ALT2 | bidirectional | Default function is ADC0_SE0/CMP0_IN0; as GPIO PTA12 it is selected on ALT1 with IRQ_17 and LPTMR0_ALT2, TPM1_CH0 on ALT2 and TPM_CLKIN0 on ALT3. |
| 21 | PTB13 | bidirectional | Default function is ADC0_SE13; as GPIO PTB13 it is selected on ALT1, TPM1_CH1 is on ALT2 and RTC_CLKOUT is on ALT3. |
| 22 | PTA0/IRQ_0/LLWU_P7 | input | Default function is SWD_CLK, the serial wire debug clock; as GPIO PTA0 it is selected on ALT1 with IRQ_0 and LLWU_P7, TPM1_CH0 on ALT2 and ADC0_SE12/CMP0_IN2 on ALT0. |
| 23 | PTA1/IRQ_1/LPTMR0_ALT1 | input | Default function is RESET_b; as GPIO PTA1 it is selected on ALT1 with IRQ_1 and LPTMR0_ALT1, and TPM_CLKIN0 is on ALT2 and RESET_b on ALT3. |
| 24 | PTA2 | bidirectional | Default function is SWD_DIO, the serial wire debug data pin; as GPIO PTA2 it is selected on ALT1 and CMP0_OUT is on ALT2. |
| 25 | EP | passive | Exposed pad (from the footprint; not named in the datasheet pin table). |
Key specifications
| Parameter | Value |
|---|---|
| Manufacturer | NXP Semicon |
| Package | QFN-24-EP(4x4) |
| Category | Embedded Processors & Controllers |
| Pins | 25 |
Electrical characteristics
Limits as printed in the datasheet (page.json metadata.characteristics carries them as data).
| Parameter | Symbol | Min | Typ | Max | Unit | Conditions | Page |
|---|---|---|---|---|---|---|---|
| Storage temperature | TSTG | -55 | 150 | °C | 4 | ||
| Solder temperature, lead-free | TSDR | 260 | °C | 4 | |||
| Electrostatic discharge voltage, human body model | VHBM | -2000 | 2000 | V | 4 | ||
| Electrostatic discharge voltage, charged-device model | VCDM | -500 | 500 | V | 4 | ||
| Latch-up current | ILAT | -100 | 100 | mA | Ambient temperature 105 °C | 4 | |
| Digital supply voltage | VDD | -0.3 | 3.8 | V | 5 | ||
| Digital supply current | IDD | 120 | mA | 5 | |||
| Instantaneous maximum current single pin limit (applies to all port pins) | ID | -25 | 25 | mA | 5 | ||
| Supply voltage | VDD | 1.71 | 3.6 | V | 6 | ||
| Analog supply voltage | VDDA | 1.71 | 3.6 | V | 6 | ||
| VDD-to-VDDA differential voltage | VDD, VDDA | -0.1 | 0.1 | V | 6 | ||
| VSS-to-VSSA differential voltage | VSS, VSSA | -0.1 | 0.1 | V | 6 | ||
| IO pin negative/positive DC injection current, single pin | IICIO | -3 | 3 | mA | VIN < VSS-0.3V | 6 | |
| Contiguous pin DC injection current, regional limit | IICcont | -25 | 25 | mA | Sum of 16 contiguous pins | 6 | |
| VDD voltage required to retain RAM | VRAM | 1.2 | V | 6 | |||
| Temperature range (ambient) | -40 | 105 | °C | 1 | |||
| Falling VDD POR detect voltage | VPOR | 0.8 | 1.1 | 1.5 | V | 6 | |
| Falling low-voltage detect threshold, high range | VLVDH | 2.48 | 2.56 | 2.64 | V | LVDV = 01 | 6 |
| Input capacitance | CIN | 7 | pF | 16 | |||
| System and core clock | fSYS | 48 | MHz | Normal run mode | 16 | ||
| Bus clock | fBUS | 24 | MHz | Normal run mode | 16 | ||
| Flash clock | fFLASH | 24 | MHz | Normal run mode | 16 | ||
| LPTMR clock | fLPTMR | 24 | MHz | Normal run mode | 16 | ||
| System and core clock | fSYS | 4 | MHz | VLPR and VLPS modes | 16 | ||
| Oscillator crystal or resonator frequency, low-frequency mode | fosc_lo | 32 | 40 | kHz | MCG_C2[RANGE]=00 | 23 | |
| Oscillator crystal or resonator frequency, high-frequency mode (low range) | fosc_hi_1 | 3 | 8 | MHz | MCG_C2[RANGE]=01 | 23 | |
| Oscillator crystal or resonator frequency, high frequency mode (high range) | fosc_hi_2 | 8 | 32 | MHz | MCG_C2[RANGE]=1x | 23 | |
| Input clock frequency (external clock mode) | fec_extal | 48 | MHz | External clock mode | 23 | ||
| Input clock duty cycle (external clock mode) | tdc_extal | 40 | 50 | 60 | % | External clock mode | 23 |
| Longword Program high-voltage time | thvpgm4 | 7.5 | 18 | μs | 24 | ||
| Sector Erase high-voltage time | thversscr | 13 | 113 | ms | 24 | ||
| Erase All high-voltage time | thversall | 52 | 452 | ms | 24 | ||
| Program Longword execution time | tpgm4 | 65 | 145 | μs | 24 | ||
| Erase Flash Sector execution time | tersscr | 14 | 114 | ms | 24 | ||
| Read 1s All Blocks execution time | trd1all | 0.5 | ms | 24 | |||
| Erase All Blocks execution time | tersall | 61 | 500 | ms | 24 | ||
| Average current adder during high voltage flash programming operation | IDD_PGM | 2.5 | 6 | mA | 24 | ||
| Average current adder during high voltage flash erase operation | IDD_ERS | 1.5 | 4 | mA | 24 | ||
| Data retention after up to 10 K cycles | tnvmretp10k | 5 | 50 | years | 25 | ||
| Data retention after up to 1 K cycles | tnvmretp1k | 20 | 100 | years | 25 | ||
| Cycling endurance | nnvmcycp | 10 | 50 | K cycles | -40 °C ≤ Tj ≤ 125 °C | 25 | |
| Supply voltage (ADC, absolute) | VDDA | 1.71 | 3.6 | V | Absolute | 25 | |
| Supply voltage delta to VDD (VDD, VDDA) | ΔVDDA | -100 | 0 | 100 | mV | 25 | |
| Ground voltage delta to VSS (VSS, VSSA) | ΔVSSA | -100 | 0 | 100 | mV | 25 | |
| ADC reference voltage high | VREFH | 1.13 | V | 25 | |||
| ADC conversion clock frequency | fADCK | 1 | 18 | MHz | ≤ 12-bit mode | 26 | |
| ADC conversion rate | Crate | 20 | 818.33 | Ksps | ≤ 12-bit modes; no ADC hardware averaging; continuous conversions enabled | 26 | |
| ADC supply current | IDDA_ADC | 0.215 | 1.7 | mA | 27 | ||
| Total unadjusted error (12-bit modes) | TUE | -6.8 | 4 | 6.8 | LSB | 12-bit modes | 27 |
| Differential non-linearity (12-bit modes) | DNL | -1.1 | 0.7 | 1.9 | LSB | 12-bit modes | 27 |
| Integral non-linearity (12-bit modes) | INL | -2.7 | 1 | 1.9 | LSB | 12-bit modes | 27 |
| Full-scale error (12-bit modes) | EFS | -4 | -5.4 | LSB | VADIN = VDDA | 27 | |
| Temperature sensor slope | 1.55 | 1.62 | 1.69 | mV/°C | Across the full temperature range of the device | 27 | |
| Temperature sensor voltage at 25 °C | VTEMP25 | 706 | 716 | 726 | mV | 25 °C | 27 |
| Supply current, high-speed mode | IDDHS | 200 | μA | EN = 1, PMODE = 1 | 28 | ||
| Supply current, low-speed mode | IDDLS | 20 | μA | EN = 1, PMODE = 0 | 28 | ||
| Analog input offset voltage | VAIO | 20 | mV | 28 | |||
| Propagation delay, high-speed mode | tDHS | 20 | 50 | 200 | ns | EN = 1, PMODE = 1 | 29 |
| Propagation delay, low-speed mode | tDLS | 80 | 250 | 600 | ns | EN = 1, PMODE = 0 | 29 |
| Comparator output low | VCMPOl | 0.5 | V | 29 |
CAD (KiCad official)
- Symbol:
MKL04Z32VFK4 - Footprint:
Package_DFN_QFN:QFN-24-1EP_4x4mm_P0.5mm_EP2.6x2.6mm - 3D model: QFN-24-EP(4x4) (KiCad packages3D, STEP)
- 3D model files:
mkl04z32vfk4-etched.step/mkl04z32vfk4-etched.glbcarry the MPN laser-etched on the die in a toggleableAdom.LaserEtchgroup (Fusion-ready);mkl04z32vfk4.step/mkl04z32vfk4.glbare the bare package body.
Provenance
Data extracted from the manufacturer datasheet, not a distributor listing:
- Datasheet: NXP Semicon datasheet (49 pp, sha256
95f3d7a94d637c53, retrieved 2026-10-30, tier: manufacturer) - Extractor: parts-factory
2.0.0/extract_pins 0.3, primaryclaude-haiku-5-5(text), consensusclaude-sonnet-5-5(agreed), guards: pin_guards 0.1: passed. Pins are checked against the footprint pad set and their cited datasheet pages before publish. - CAD: KiCad official libraries (CC-BY-SA 4.0).