3D Model
Open in new tab ↗
Loads when you scroll to it. Unloads after 5 minutes in the background.
Symbol & Footprint
Schematic Symbol
Open full view ↗Loads when you scroll to it. Unloads after 5 minutes in the background.
PCB Footprint
Open full view ↗Loads when you scroll to it. Unloads after 5 minutes in the background.
Datasheet
Open in new tab ↗Loads when you scroll to it. Unloads after 5 minutes in the background.
README
markdownPIC18F27J53T-I
Microchip Tech · Microcontroller Units (MCUs/MPUs/SOCs) · SSOP-28-208mil
PIC18F27J53T-I from Microchip Tech, in a SSOP-28-208mil. Pinout and pin descriptions extracted from the manufacturer datasheet (extract_pins, cross-checked by a second model); symbol, footprint, and 3D from KiCad-official CAD.
Pinout
| Pin | Name | Type | Function |
|---|---|---|---|
| 1 | MCLR | input | Master Clear (Reset) input; this is an active-low Reset to the device and is 5.5V tolerant. |
| 2 | RA0 | bidirectional | PORTA<0> digital I/O multiplexed with AN0, C1INA, ULPWU and remappable pin RP0. |
| 3 | RA1 | bidirectional | PORTA<1> digital I/O multiplexed with AN1, C2INA, the band gap reference output VBG and remappable pin RP1. |
| 4 | RA2 | bidirectional | PORTA<2> digital I/O multiplexed with AN2, C2INB, C1IND, C3INB, the A/D low reference input VREF- and the comparator reference output CVREF, which disables the digital output when enabled. |
| 5 | RA3 | bidirectional | PORTA<3> digital I/O multiplexed with AN3, C1INB and the A/D high reference input VREF+. |
| 6 | VDDCORE/VCAP | power_in | Core logic supply VDDCORE when the regulator is disabled (LF parts) or external filter capacitor connection VCAP when the regulator is enabled (F parts), which requires a low-ESR (<5 Ω) 10 µF capacitor to ground. |
| 7 | RA5 | bidirectional | PORTA<5> digital I/O multiplexed with AN4, C1INC, SPI slave select SS1, HLVDIN, external USB transceiver RCV input and remappable pin RP2. |
| 8 | VSS1 | power_in | Ground reference for logic and I/O pins. |
| 9 | OSC1/CLKI/RA7 | bidirectional | Oscillator crystal or external clock input (ST buffer in RC mode, CMOS otherwise), also usable as RA7 digital I/O when the clock function is not used. |
| 10 | OSC2/CLKO/RA6 | bidirectional | Oscillator crystal output or CLKO (FOSC/4 in RC and EC modes), also usable as RA6 digital I/O when the clock function is not used. |
| 11 | RC0 | bidirectional | PORTC<0> digital I/O multiplexed with Timer1 oscillator output T1OSO, Timer1 digital clock input T1CKI and remappable pin RP11. |
| 12 | RC1 | bidirectional | PORTC<1> digital I/O multiplexed with CCP8, Timer1 oscillator input T1OSI, external USB transceiver NOE output UOE and remappable pin RP12. |
| 13 | RC2 | bidirectional | PORTC<2> digital I/O multiplexed with AN11, C2IND, CTMU pulse generator output CTPLS and remappable pin RP13, and defaults to an analog input on Power-on Reset. |
| 14 | VUSB | power_in | USB voltage input pin. |
| 15 | RC4 | bidirectional | Digital input PORTC<4> and USB bus minus line D-/VM, whose input buffers follow the VUSB level so VUSB must not be left floating if RC4 is used as a general input. |
| 16 | RC5 | bidirectional | Digital input PORTC<5> and USB bus plus line D+/VP, whose input buffers follow the VUSB level so VUSB must not be left floating if RC5 is used as a general input. |
| 17 | RC6 | bidirectional | PORTC<6> digital I/O multiplexed with CCP9, EUSART1 asynchronous transmit TX1, synchronous clock CK1 and remappable pin RP17, and is 5.5V tolerant. |
| 18 | RC7 | bidirectional | PORTC<7> digital I/O multiplexed with CCP10, EUSART1 asynchronous receive RX1, synchronous data DT1, SPI data output SDO1 and remappable pin RP18, and is 5.5V tolerant. |
| 19 | VSS2 | power_in | Ground reference for logic and I/O pins. |
| 20 | VDD | power_in | Positive supply for peripheral digital logic and I/O pins. |
| 21 | RB0 | bidirectional | PORTB<0> digital I/O with weak pull-up when RBPU is cleared, multiplexed with AN12, C3IND, external interrupt INT0 and remappable pin RP3, and 5.5V tolerant. |
| 22 | RB1 | bidirectional | PORTB<1> digital I/O with weak pull-up when RBPU is cleared, multiplexed with AN10, C3INC, RTCC and remappable pin RP4, and 5.5V tolerant. |
| 23 | RB2 | bidirectional | PORTB<2> digital I/O with weak pull-up when RBPU is cleared, multiplexed with AN8, C2INC, CTMU edge 1 input CTED1, external USB transceiver D- data output VMO, reference clock REFO and remappable pin RP5, and 5.5V tolerant. |
| 24 | RB3 | bidirectional | PORTB<3> digital I/O with weak pull-up when RBPU is cleared, multiplexed with AN9, C3INA, CTMU edge 2 input CTED2, external USB transceiver D+ data output VPO and remappable pin RP6, and 5.5V tolerant. |
| 25 | RB4 | bidirectional | PORTB<4> digital I/O with interrupt-on-change (KBI0), multiplexed with CCP4, SPI/I2C clock SCK1/SCL1 and remappable pin RP7, and 5.5V tolerant. |
| 26 | RB5 | bidirectional | PORTB<5> digital I/O with interrupt-on-change (KBI1), multiplexed with CCP5, SPI data input SDI1, I2C data SDA1 and remappable pin RP8, and 5.5V tolerant. |
| 27 | RB6 | bidirectional | PORTB<6> digital I/O with interrupt-on-change (KBI2), multiplexed with CCP6, ICSP clock PGC and remappable pin RP9, and 5.5V tolerant. |
| 28 | RB7 | bidirectional | PORTB<7> digital I/O with interrupt-on-change (KBI3), multiplexed with CCP7, ICSP/ICD data PGD and remappable pin RP10, and 5.5V tolerant. |
Key specifications
| Parameter | Value |
|---|---|
| Manufacturer | Microchip Tech |
| Package | SSOP-28-208mil |
| Category | Single Chip Microcomputer/Microcontroller |
| Pins | 28 |
Electrical characteristics
Limits as printed in the datasheet (page.json metadata.characteristics carries them as data).
| Parameter | Symbol | Min | Typ | Max | Unit | Conditions | Page |
|---|---|---|---|---|---|---|---|
| Supply voltage VDD (F part, regulator enabled) | VDD | 2.15 | 3.6 | V | PIC18F27J53 'F' part; text states F parts can run from 2.15V-3.6V on VDD | 9 | |
| Operating frequency | 48 | MHz | PIC18F27J53 Table 1-1 printed as 'DC, 48 MHz' | 10 |
CAD (KiCad official)
- Symbol:
PIC18F27J53T-I - Footprint:
Package_SO:SSOP-28_5.3x10.2mm_P0.65mm - 3D model: SSOP-28-208mil (KiCad packages3D, STEP)
- 3D model files:
pic18f27j53t-i-etched.step/pic18f27j53t-i-etched.glbcarry the MPN laser-etched on the die in a toggleableAdom.LaserEtchgroup (Fusion-ready);pic18f27j53t-i.step/pic18f27j53t-i.glbare the bare package body.
Provenance
Data extracted from the manufacturer datasheet, not a distributor listing:
- Datasheet: Microchip Tech datasheet (564 pp, sha256
c6b59eb4736c4107, retrieved 2026-10-30, tier: manufacturer) - Extractor: parts-factory
2.0.0/extract_pins 0.3, primaryclaude-haiku-5-5(text), consensusclaude-sonnet-5-5(agreed), guards: pin_guards 0.1: passed. Pins are checked against the footprint pad set and their cited datasheet pages before publish. - CAD: KiCad official libraries (CC-BY-SA 4.0).