main
Download ZIP Propose a change
Generated by kicad-footprint-generator · KiCad file format 20260206
Name Last commit message Last updated
docs pic18f27j53t-i: hero re-rendered with the chip (after the 10-30 render outage) · Ray
viewers pic18f27j53t-i: viewers · Ray
package.json Publish 0.1.1 · Ray
page.json Publish 0.1.1 · Ray
pic18f27j53t-i-etched.glb Publish 0.1.0 · Ray
pic18f27j53t-i-etched.step pic18f27j53t-i: factory component page (tier=mfr) · Ray
pic18f27j53t-i-hero.glb pic18f27j53t-i: hero GLB from the etched model (keeps the MPN mark) · Ray
pic18f27j53t-i-hero.overlay.json Publish 0.1.0 · Ray
pic18f27j53t-i.glb Publish 0.1.0 · Ray
pic18f27j53t-i.kicad_mod Publish 0.1.0 · Ray
pic18f27j53t-i.kicad_sym Publish 0.1.0 · Ray
pic18f27j53t-i.lbr Publish 0.1.0 · Ray
pic18f27j53t-i.step Publish 0.1.0 · Ray
README.md Publish 0.1.0 · Ray
verification.json Verified: Published by the parts factory: tier mfr, 28 pins · Ray

PIC18F27J53T-I

Microchip Tech · Microcontroller Units (MCUs/MPUs/SOCs) · SSOP-28-208mil

PIC18F27J53T-I from Microchip Tech, in a SSOP-28-208mil. Pinout and pin descriptions extracted from the manufacturer datasheet (extract_pins, cross-checked by a second model); symbol, footprint, and 3D from KiCad-official CAD.

Pinout

Pin Name Type Function
1 MCLR input Master Clear (Reset) input; this is an active-low Reset to the device and is 5.5V tolerant.
2 RA0 bidirectional PORTA<0> digital I/O multiplexed with AN0, C1INA, ULPWU and remappable pin RP0.
3 RA1 bidirectional PORTA<1> digital I/O multiplexed with AN1, C2INA, the band gap reference output VBG and remappable pin RP1.
4 RA2 bidirectional PORTA<2> digital I/O multiplexed with AN2, C2INB, C1IND, C3INB, the A/D low reference input VREF- and the comparator reference output CVREF, which disables the digital output when enabled.
5 RA3 bidirectional PORTA<3> digital I/O multiplexed with AN3, C1INB and the A/D high reference input VREF+.
6 VDDCORE/VCAP power_in Core logic supply VDDCORE when the regulator is disabled (LF parts) or external filter capacitor connection VCAP when the regulator is enabled (F parts), which requires a low-ESR (<5 Ω) 10 µF capacitor to ground.
7 RA5 bidirectional PORTA<5> digital I/O multiplexed with AN4, C1INC, SPI slave select SS1, HLVDIN, external USB transceiver RCV input and remappable pin RP2.
8 VSS1 power_in Ground reference for logic and I/O pins.
9 OSC1/CLKI/RA7 bidirectional Oscillator crystal or external clock input (ST buffer in RC mode, CMOS otherwise), also usable as RA7 digital I/O when the clock function is not used.
10 OSC2/CLKO/RA6 bidirectional Oscillator crystal output or CLKO (FOSC/4 in RC and EC modes), also usable as RA6 digital I/O when the clock function is not used.
11 RC0 bidirectional PORTC<0> digital I/O multiplexed with Timer1 oscillator output T1OSO, Timer1 digital clock input T1CKI and remappable pin RP11.
12 RC1 bidirectional PORTC<1> digital I/O multiplexed with CCP8, Timer1 oscillator input T1OSI, external USB transceiver NOE output UOE and remappable pin RP12.
13 RC2 bidirectional PORTC<2> digital I/O multiplexed with AN11, C2IND, CTMU pulse generator output CTPLS and remappable pin RP13, and defaults to an analog input on Power-on Reset.
14 VUSB power_in USB voltage input pin.
15 RC4 bidirectional Digital input PORTC<4> and USB bus minus line D-/VM, whose input buffers follow the VUSB level so VUSB must not be left floating if RC4 is used as a general input.
16 RC5 bidirectional Digital input PORTC<5> and USB bus plus line D+/VP, whose input buffers follow the VUSB level so VUSB must not be left floating if RC5 is used as a general input.
17 RC6 bidirectional PORTC<6> digital I/O multiplexed with CCP9, EUSART1 asynchronous transmit TX1, synchronous clock CK1 and remappable pin RP17, and is 5.5V tolerant.
18 RC7 bidirectional PORTC<7> digital I/O multiplexed with CCP10, EUSART1 asynchronous receive RX1, synchronous data DT1, SPI data output SDO1 and remappable pin RP18, and is 5.5V tolerant.
19 VSS2 power_in Ground reference for logic and I/O pins.
20 VDD power_in Positive supply for peripheral digital logic and I/O pins.
21 RB0 bidirectional PORTB<0> digital I/O with weak pull-up when RBPU is cleared, multiplexed with AN12, C3IND, external interrupt INT0 and remappable pin RP3, and 5.5V tolerant.
22 RB1 bidirectional PORTB<1> digital I/O with weak pull-up when RBPU is cleared, multiplexed with AN10, C3INC, RTCC and remappable pin RP4, and 5.5V tolerant.
23 RB2 bidirectional PORTB<2> digital I/O with weak pull-up when RBPU is cleared, multiplexed with AN8, C2INC, CTMU edge 1 input CTED1, external USB transceiver D- data output VMO, reference clock REFO and remappable pin RP5, and 5.5V tolerant.
24 RB3 bidirectional PORTB<3> digital I/O with weak pull-up when RBPU is cleared, multiplexed with AN9, C3INA, CTMU edge 2 input CTED2, external USB transceiver D+ data output VPO and remappable pin RP6, and 5.5V tolerant.
25 RB4 bidirectional PORTB<4> digital I/O with interrupt-on-change (KBI0), multiplexed with CCP4, SPI/I2C clock SCK1/SCL1 and remappable pin RP7, and 5.5V tolerant.
26 RB5 bidirectional PORTB<5> digital I/O with interrupt-on-change (KBI1), multiplexed with CCP5, SPI data input SDI1, I2C data SDA1 and remappable pin RP8, and 5.5V tolerant.
27 RB6 bidirectional PORTB<6> digital I/O with interrupt-on-change (KBI2), multiplexed with CCP6, ICSP clock PGC and remappable pin RP9, and 5.5V tolerant.
28 RB7 bidirectional PORTB<7> digital I/O with interrupt-on-change (KBI3), multiplexed with CCP7, ICSP/ICD data PGD and remappable pin RP10, and 5.5V tolerant.

Key specifications

Parameter Value
Manufacturer Microchip Tech
Package SSOP-28-208mil
Category Single Chip Microcomputer/Microcontroller
Pins 28

Electrical characteristics

Limits as printed in the datasheet (page.json metadata.characteristics carries them as data).

Parameter Symbol Min Typ Max Unit Conditions Page
Supply voltage VDD (F part, regulator enabled) VDD 2.15 3.6 V PIC18F27J53 'F' part; text states F parts can run from 2.15V-3.6V on VDD 9
Operating frequency 48 MHz PIC18F27J53 Table 1-1 printed as 'DC, 48 MHz' 10

CAD (KiCad official)

  • Symbol: PIC18F27J53T-I
  • Footprint: Package_SO:SSOP-28_5.3x10.2mm_P0.65mm
  • 3D model: SSOP-28-208mil (KiCad packages3D, STEP)
  • 3D model files: pic18f27j53t-i-etched.step / pic18f27j53t-i-etched.glb carry the MPN laser-etched on the die in a toggleable Adom.LaserEtch group (Fusion-ready); pic18f27j53t-i.step / pic18f27j53t-i.glb are the bare package body.

Provenance

Data extracted from the manufacturer datasheet, not a distributor listing:

  • Datasheet: Microchip Tech datasheet (564 pp, sha256 c6b59eb4736c4107, retrieved 2026-10-30, tier: manufacturer)
  • Extractor: parts-factory 2.0.0 / extract_pins 0.3, primary claude-haiku-5-5 (text), consensus claude-sonnet-5-5 (agreed), guards: pin_guards 0.1: passed. Pins are checked against the footprint pad set and their cited datasheet pages before publish.
  • CAD: KiCad official libraries (CC-BY-SA 4.0).

Datasheet PDF