3D Model
Open in new tab ↗
Loads when you scroll to it. Unloads after 5 minutes in the background.
Symbol & Footprint
Schematic Symbol
Open full view ↗Loads when you scroll to it. Unloads after 5 minutes in the background.
PCB Footprint
Open full view ↗Loads when you scroll to it. Unloads after 5 minutes in the background.
Datasheet
Open in new tab ↗Loads when you scroll to it. Unloads after 5 minutes in the background.
README
markdownINA2331AIPWR
Texas Instruments · Instrumentation Amplifiers · TSSOP-14
INA2331AIPWR from Texas Instruments, in a TSSOP-14. Pinout and pin descriptions extracted from the manufacturer datasheet (extract_pins, cross-checked by a second model); symbol, footprint, and 3D from KiCad-official CAD.
Pinout
| Pin | Name | Type | Function |
|---|---|---|---|
| 1 | RGA | passive | Channel A gain-setting terminal; external R1/R2 per G = 5 + 5(R2/R1) set gain above 5V/V, and shorting VOUT to RG gives G = 5. |
| 2 | VIN-A | power_in | Channel A inverting input, diode-clamped to the supply rails with signals limited to (V-) - 0.5V to (V+) + 0.5V and 10mA. |
| 3 | VIN+A | power_in | Channel A non-inverting input, diode-clamped to the supply rails with signals limited to (V-) - 0.5V to (V+) + 0.5V and 10mA. |
| 4 | V- | power_in | Negative supply (or ground in single-supply operation), supply range V+ to V- of +2.7V to +5.5V specified and 7.5V absolute maximum. |
| 5 | VIN+B | power_in | Channel B non-inverting input, diode-clamped to the supply rails with signals limited to (V-) - 0.5V to (V+) + 0.5V and 10mA. |
| 6 | VIN-B | power_in | Channel B inverting input, diode-clamped to the supply rails with signals limited to (V-) - 0.5V to (V+) + 0.5V and 10mA. |
| 7 | RGB | passive | Channel B gain-setting terminal; external R1/R2 per G = 5 + 5(R2/R1) set gain above 5V/V, and shorting VOUT to RG gives G = 5. |
| 8 | Shutdown B | input | Channel B shutdown control, nominally connected to V+; pulled below 0.8V on a 5V supply it enters sleep mode with high output impedance. |
| 9 | VOUTB | output | Channel B rail-to-rail output, optimized for loads of 10kΩ or greater and swinging to within 25mV of the rail at 10kΩ. |
| 10 | REFB | input | Channel B reference terminal defining zero output level; needs a low-impedance connection and must be at least 1.2V below the positive supply. |
| 11 | V+ | power_in | Positive supply, +2.7V to +5.5V specified (+2.5V to +5.5V operating), 7.5V absolute maximum V+ to V-, decoupled with 0.1µF. |
| 12 | REFA | input | Channel A reference terminal defining zero output level; needs a low-impedance connection and must be at least 1.2V below the positive supply. |
| 13 | VOUTA | output | Channel A rail-to-rail output, optimized for loads of 10kΩ or greater and swinging to within 25mV of the rail at 10kΩ. |
| 14 | Shutdown A | input | Channel A shutdown control, nominally connected to V+; pulled below 0.8V on a 5V supply it enters sleep mode with high output impedance. |
Key specifications
| Parameter | Value |
|---|---|
| Manufacturer | Texas Instruments |
| Package | TSSOP-14 |
| Category | Amplifiers/Comparators |
| Pins | 14 |
Electrical characteristics
Limits as printed in the datasheet (page.json metadata.characteristics carries them as data).
| Parameter | Symbol | Min | Typ | Max | Unit | Conditions | Page |
|---|---|---|---|---|---|---|---|
| Input Offset Voltage, RTI (VS = +5V) | -1000 | 250 | 1000 | µV | VS = +5V | 3 | |
| Power Supply Rejection Ratio (vs Power Supply) | PSRR | -200 | 50 | 200 | µV/V | VS = +2.7V to +5.5V | 3 |
| Common-Mode Rejection | CMRR | 80 | 94 | dB | VS = 5V, VCM = 0.55V to 3.8V | 3 | |
| Common-Mode Rejection, over temperature (–40°C to +85°C) | CMRR | 75 | dB | –40°C to +85°C, VS = 5V, VCM = 0.55V to 3.8V | 3 | ||
| Common-Mode Rejection, over temperature | CMRR | 70 | dB | Over temperature, VS = 5V, VCM = 0.55V to 3.8V | 3 | ||
| Bias Current | IB | -10 | 0.5 | 10 | pA | VCM = VS /2 | 3 |
| Offset Current | IOS | -10 | 0.5 | 10 | pA | VCM = VS /2 | 3 |
| Input Common-Mode Range (VS = 2.7V) | 0.35 | 1.5 | V | VS = 2.7V | 3 | ||
| Input Common-Mode Range (VS = 5V) | 0.55 | 3.8 | V | VS = 5V | 3 | ||
| Range of Gain | 5 | 1000 | V/V | 3 | |||
| Gain Error | -0.1 | 0.02 | 0.1 | % | G = 5 | 3 | |
| Gain Error vs Temperature | -10 | 2 | 10 | ppm/°C | G = 5 | 3 | |
| Short-Circuit Current | -32 | 48 | mA | 3 | |||
| Bandwidth, –3dB | BW | 2 | MHz | G = 25 | 3 | ||
| Slew Rate | SR | 5 | V/µs | VS = 5V, G = 25 | 3 | ||
| Settling Time, 0.1% | tS | 1.7 | µs | G = 25, CL = 100pF, VO = 2V step | 3 | ||
| Settling Time, 0.01% | tS | 2.5 | µs | G = 25, CL = 100pF, VO = 2V step | 3 | ||
| Overload Recovery | 2 | µs | 50% Input Overload G = 25 | 3 | |||
| Specified Voltage Range | 2.7 | 5.5 | V | 3 | |||
| Operating Voltage Range | 2.5 | 5.5 | V | 3 | |||
| Quiescent Current per Channel | IQ | 415 | 490 | µA | VSD > 2.5 | 3 | |
| Shutdown Quiescent Current per Channel | ISD | 0.01 | 1 | µA | VSD < 0.8 | 3 | |
| Specified/Operating Temperature Range | -55 | 125 | °C | 3 | |||
| Storage Temperature Range | -65 | 150 | °C | 3 | |||
| Thermal Resistance, Junction-to-Ambient | θJA | 150 | °C/W | MSOP-8, TSSOP-14 Surface Mount | 3 | ||
| Supply Voltage, V+ to V– | 7.5 | V | 2 | ||||
| Signal Input Current | 10 | mA | Input terminals, see note 2 | 2 | |||
| Operating Temperature | -55 | 125 | °C | 2 | |||
| Storage Temperature | -65 | 150 | °C | 2 | |||
| Junction Temperature | 150 | °C | 2 | ||||
| Lead Temperature (soldering, 10s) | 300 | °C | Soldering, 10s | 2 |
CAD (KiCad official)
- Symbol:
INA2331AIPWR - Footprint:
Package_SO:TSSOP-14_4.4x5mm_P0.65mm - 3D model: TSSOP-14 (KiCad packages3D, STEP)
- 3D model files:
ina2331aipwr-etched.step/ina2331aipwr-etched.glbcarry the MPN laser-etched on the die in a toggleableAdom.LaserEtchgroup (Fusion-ready);ina2331aipwr.step/ina2331aipwr.glbare the bare package body.
Provenance
Data extracted from the manufacturer datasheet, not a distributor listing:
- Datasheet: Texas Instruments datasheet (24 pp, sha256
b563b3023a3cb8c8, retrieved 2026-10-05, tier: lcsc) - Extractor: parts-factory
2.0.0/extract_pins 0.3, primaryclaude-haiku-4-5-20251001(text), consensusclaude-sonnet-5-5(agreed), guards: pin_guards 0.1: passed. Pins are checked against the footprint pad set and their cited datasheet pages before publish. - CAD: KiCad official libraries (CC-BY-SA 4.0).