main
Download ZIP Propose a change
Generated by kicad-footprint-generator · KiCad file format 20260206
Name Last commit message Last updated
docs Publish 0.1.0 · Ray
viewers ina2331aipwr: viewers · Ray
ina2331aipwr-etched.fit.json ina2331aipwr: one-pass backfill (re-etched) · Ray
ina2331aipwr-etched.glb ina2331aipwr: one-pass backfill (re-etched) · Ray
ina2331aipwr-etched.step ina2331aipwr: one-pass backfill (re-etched) · Ray
ina2331aipwr-hero.glb ina2331aipwr: one-pass backfill (re-etched) · Ray
ina2331aipwr-hero.overlay.json ina2331aipwr: one-pass backfill (re-etched) · Ray
ina2331aipwr.glb Publish 0.1.0 · Ray
ina2331aipwr.kicad_mod Publish 0.1.0 · Ray
ina2331aipwr.kicad_sym Publish 0.1.0 · Ray
ina2331aipwr.lbr Publish 0.1.0 · Ray
ina2331aipwr.step Publish 0.1.0 · Ray
package.json Publish 0.1.1 · Ray
page.json Publish 0.1.1 · Ray
README.md ina2331aipwr: specified limits as data (metadata.characteristics, 31 rows from the datasheet) · Ray

INA2331AIPWR

Texas Instruments · Instrumentation Amplifiers · TSSOP-14

INA2331AIPWR from Texas Instruments, in a TSSOP-14. Pinout and pin descriptions extracted from the manufacturer datasheet (extract_pins, cross-checked by a second model); symbol, footprint, and 3D from KiCad-official CAD.

Pinout

Pin Name Type Function
1 RGA passive Channel A gain-setting terminal; external R1/R2 per G = 5 + 5(R2/R1) set gain above 5V/V, and shorting VOUT to RG gives G = 5.
2 VIN-A power_in Channel A inverting input, diode-clamped to the supply rails with signals limited to (V-) - 0.5V to (V+) + 0.5V and 10mA.
3 VIN+A power_in Channel A non-inverting input, diode-clamped to the supply rails with signals limited to (V-) - 0.5V to (V+) + 0.5V and 10mA.
4 V- power_in Negative supply (or ground in single-supply operation), supply range V+ to V- of +2.7V to +5.5V specified and 7.5V absolute maximum.
5 VIN+B power_in Channel B non-inverting input, diode-clamped to the supply rails with signals limited to (V-) - 0.5V to (V+) + 0.5V and 10mA.
6 VIN-B power_in Channel B inverting input, diode-clamped to the supply rails with signals limited to (V-) - 0.5V to (V+) + 0.5V and 10mA.
7 RGB passive Channel B gain-setting terminal; external R1/R2 per G = 5 + 5(R2/R1) set gain above 5V/V, and shorting VOUT to RG gives G = 5.
8 Shutdown B input Channel B shutdown control, nominally connected to V+; pulled below 0.8V on a 5V supply it enters sleep mode with high output impedance.
9 VOUTB output Channel B rail-to-rail output, optimized for loads of 10kΩ or greater and swinging to within 25mV of the rail at 10kΩ.
10 REFB input Channel B reference terminal defining zero output level; needs a low-impedance connection and must be at least 1.2V below the positive supply.
11 V+ power_in Positive supply, +2.7V to +5.5V specified (+2.5V to +5.5V operating), 7.5V absolute maximum V+ to V-, decoupled with 0.1µF.
12 REFA input Channel A reference terminal defining zero output level; needs a low-impedance connection and must be at least 1.2V below the positive supply.
13 VOUTA output Channel A rail-to-rail output, optimized for loads of 10kΩ or greater and swinging to within 25mV of the rail at 10kΩ.
14 Shutdown A input Channel A shutdown control, nominally connected to V+; pulled below 0.8V on a 5V supply it enters sleep mode with high output impedance.

Key specifications

Parameter Value
Manufacturer Texas Instruments
Package TSSOP-14
Category Amplifiers/Comparators
Pins 14

Electrical characteristics

Limits as printed in the datasheet (page.json metadata.characteristics carries them as data).

Parameter Symbol Min Typ Max Unit Conditions Page
Input Offset Voltage, RTI (VS = +5V) -1000 250 1000 µV VS = +5V 3
Power Supply Rejection Ratio (vs Power Supply) PSRR -200 50 200 µV/V VS = +2.7V to +5.5V 3
Common-Mode Rejection CMRR 80 94 dB VS = 5V, VCM = 0.55V to 3.8V 3
Common-Mode Rejection, over temperature (–40°C to +85°C) CMRR 75 dB –40°C to +85°C, VS = 5V, VCM = 0.55V to 3.8V 3
Common-Mode Rejection, over temperature CMRR 70 dB Over temperature, VS = 5V, VCM = 0.55V to 3.8V 3
Bias Current IB -10 0.5 10 pA VCM = VS /2 3
Offset Current IOS -10 0.5 10 pA VCM = VS /2 3
Input Common-Mode Range (VS = 2.7V) 0.35 1.5 V VS = 2.7V 3
Input Common-Mode Range (VS = 5V) 0.55 3.8 V VS = 5V 3
Range of Gain 5 1000 V/V 3
Gain Error -0.1 0.02 0.1 % G = 5 3
Gain Error vs Temperature -10 2 10 ppm/°C G = 5 3
Short-Circuit Current -32 48 mA 3
Bandwidth, –3dB BW 2 MHz G = 25 3
Slew Rate SR 5 V/µs VS = 5V, G = 25 3
Settling Time, 0.1% tS 1.7 µs G = 25, CL = 100pF, VO = 2V step 3
Settling Time, 0.01% tS 2.5 µs G = 25, CL = 100pF, VO = 2V step 3
Overload Recovery 2 µs 50% Input Overload G = 25 3
Specified Voltage Range 2.7 5.5 V 3
Operating Voltage Range 2.5 5.5 V 3
Quiescent Current per Channel IQ 415 490 µA VSD > 2.5 3
Shutdown Quiescent Current per Channel ISD 0.01 1 µA VSD < 0.8 3
Specified/Operating Temperature Range -55 125 °C 3
Storage Temperature Range -65 150 °C 3
Thermal Resistance, Junction-to-Ambient θJA 150 °C/W MSOP-8, TSSOP-14 Surface Mount 3
Supply Voltage, V+ to V– 7.5 V 2
Signal Input Current 10 mA Input terminals, see note 2 2
Operating Temperature -55 125 °C 2
Storage Temperature -65 150 °C 2
Junction Temperature 150 °C 2
Lead Temperature (soldering, 10s) 300 °C Soldering, 10s 2

CAD (KiCad official)

  • Symbol: INA2331AIPWR
  • Footprint: Package_SO:TSSOP-14_4.4x5mm_P0.65mm
  • 3D model: TSSOP-14 (KiCad packages3D, STEP)
  • 3D model files: ina2331aipwr-etched.step / ina2331aipwr-etched.glb carry the MPN laser-etched on the die in a toggleable Adom.LaserEtch group (Fusion-ready); ina2331aipwr.step / ina2331aipwr.glb are the bare package body.

Provenance

Data extracted from the manufacturer datasheet, not a distributor listing:

  • Datasheet: Texas Instruments datasheet (24 pp, sha256 b563b3023a3cb8c8, retrieved 2026-10-05, tier: lcsc)
  • Extractor: parts-factory 2.0.0 / extract_pins 0.3, primary claude-haiku-4-5-20251001 (text), consensus claude-sonnet-5-5 (agreed), guards: pin_guards 0.1: passed. Pins are checked against the footprint pad set and their cited datasheet pages before publish.
  • CAD: KiCad official libraries (CC-BY-SA 4.0).

Datasheet PDF