Loads when you scroll to it. Unloads after 5 minutes in the background.

Symbol & Footprint

Schematic Symbol

Open full view ↗
Loads when you scroll to it. Unloads after 5 minutes in the background.

PCB Footprint

Open full view ↗
Loads when you scroll to it. Unloads after 5 minutes in the background.
Loads when you scroll to it. Unloads after 5 minutes in the background.
Download PDF
Contents

README

markdown

TMCS1107A4BQDR

Texas Instruments · Pre-ordered Products · SOIC-8

TMCS1107A4BQDR from Texas Instruments, in a SOIC-8. Pinout and pin descriptions extracted from the manufacturer datasheet (extract_pins, cross-checked by a second model); symbol, footprint, and 3D from KiCad-official CAD.

Pinout

Pin Name Type Function
1 IN+ passive Positive input current pin; current flowing into IN+ is treated as positive, and the IN+/IN- conductor is rated ±420 VPK to GND with 1.8 mΩ resistance.
2 IN+ passive Positive input current pin, internally the same conductor as pin 1; current flowing into IN+ is treated as positive.
3 IN- passive Negative input current pin; part of the isolated 1.8 mΩ current conductor rated ±420 VPK to GND.
4 IN- passive Negative input current pin, internally the same conductor as pin 3, on the isolated high-voltage side.
5 GND power_in Ground reference for the low-voltage side; input voltages are specified relative to this pin.
6 NC unconnected No connection; pin tolerates capacitive or resistive connection to GND or VS (1 MΩ input impedance for GND < VNC < VS), and shorting to GND is recommended if acceptable.
7 VOUT output Analog output voltage proportional to input current (400 mV/A for A4B) with zero-current output of 0.5 × VS, swinging between GND and VS.
8 VS power_in Supply voltage of 4.5 V to 5.5 V for the TMCS1107A4B (absolute max 6 V), with a 0.1 µF low-ESR decoupling capacitor to GND recommended.

Key specifications

Parameter Value
Manufacturer Texas Instruments
Package SOIC-8
Category Solders / Accessories / Batteries
Pins 8

Electrical characteristics

Limits as printed in the datasheet (page.json metadata.characteristics carries them as data).

Parameter Symbol Min Typ Max Unit Conditions Page
Sensitivity error -1.2 0.4 1.2 % 0.05V ≤ VOUT ≤ VS, 0.2V, TA = 25ºC 8
Sensitivity error incl. lifetime and environmental drift -1.8 0.7 1.8 % 0.05V ≤ VOUT ≤ VS, 0.2V, TA = 25ºC 8
Sensitivity error -1.8 0.7 1.8 % 0.05V ≤ VOUT ≤ VS, 0.2V, TA = -40ºC to +85ºC 8
Sensitivity error -2.25 0.9 2.25 % 0.05V ≤ VOUT ≤ VS, 0.2V, TA = -40ºC to +125ºC 8
Sensitivity 400 mV/A TMCS1107A4B 8
Nonlinearity error 0.5 % VOUT = 0.5V to VS, 0.5V 8
Output voltage offset error VOE -30 5 30 mV TMCS1107A4B 8
Output voltage temperature drift -170 40 170 µV/℃ TMCS1107A4B, TA = -40ºC to +125ºC 8
Offset error, RTI IOS -75 12.5 75 mA TMCS1107A4B 9
Offset error temperature drift, RTI -425 100 425 µA/°C TMCS1107A4B, TA = -40ºC to +125ºC 9
Power supply rejection ratio PSRR -6.5 1 6.5 mV/V VS = 3V to 5.5V, TA= -40ºC to +125ºC 9
Common-mode transient immunity CMTI 50 kV/µs 9
Common-mode rejection ratio, RTI CMRR 5 uA/V DC to 60Hz 9
Zero current VOUT 0.5 V/V TMCS1107AxB, 0.5*VS 9
Noise density, RTI 225 μA/√Hz TMCS1107A4B 9
Input conductor resistance RIN 1.8 mΩ IN+ to IN- 9
Input conductor resistance temperature drift 4.4 μΩ/°C TA= -40ºC to +125ºC 9
Magnetic coupling factor G 1.1 mT/A TA = 25ºC 9
Allowable continuous RMS current IIN,max 30 A TA = 25ºC 9
Allowable continuous RMS current IIN,max 25 A TA = 85ºC 9
Allowable continuous RMS current IIN,max 22.5 A TA = 105ºC 9
Allowable continuous RMS current IIN,max 16 A TA = 125ºC 9
NC (pin 6) input impedance 1 MΩ Within allowable range, GND < VNC < VS 9
Closed-loop output impedance ZOUT 0.2 Ω f = 1 Hz to 1 kHz 9
Closed-loop output impedance ZOUT 2 Ω f = 10kHz 9
Maximum capacitive load 1 nF No sustained oscillation 9
Operating supply voltage range VS 3 5.5 V 1
Maximum supply current 6 mA 1
Operating temperature range TA -40 125 °C 1
Signal bandwidth 80 kHz -3dB, all gains 22
Safety input current (side 1) IS 30 A RθJA = 36.6°C/W, TJ = 150°C, TA = 25°C 7
Safety input, output, or supply current (side 2) IS 0.68 A RθJA = 36.6°C/W, VI = 5V, TJ = 150°C, TA = 25°C 7
Safety input, output, or total power PS 3.4 W RθJA = 36.6°C/W, TJ = 150°C, TA = 25°C 7
Safety temperature TS 150 ℃ 7

CAD (KiCad official)

  • Symbol: TMCS1107A4BQDR
  • Footprint: Package_SO:SOIC-8_3.9x4.9mm_P1.27mm
  • 3D model: SOIC-8 (KiCad packages3D, STEP)
  • 3D model files: tmcs1107a4bqdr-etched.step / tmcs1107a4bqdr-etched.glb carry the MPN laser-etched on the die in a toggleable Adom.LaserEtch group (Fusion-ready); tmcs1107a4bqdr.step / tmcs1107a4bqdr.glb are the bare package body.

Provenance

Data extracted from the manufacturer datasheet, not a distributor listing:

  • Datasheet: Texas Instruments datasheet (45 pp, sha256 a6ac0ae9d7791cd1, retrieved 2026-10-26, tier: manufacturer)
  • Datasheet language: Chinese. Pin names, descriptions, and specs on this page were extracted and translated to English by ds2sf; the linked PDF is the manufacturer original.
  • Extractor: parts-factory 2.0.0 / extract_pins 0.3, primary claude-sonnet-5-5 (text), consensus claude-sonnet-5-5 (agreed), guards: pin_guards 0.1: passed. Pins are checked against the footprint pad set and their cited datasheet pages before publish.
  • CAD: KiCad official libraries (CC-BY-SA 4.0).

Datasheet PDF