Generated by kicad-footprint-generator · KiCad file format 20260206
TMCS1107A4BQDR
Texas Instruments · Pre-ordered Products · SOIC-8
TMCS1107A4BQDR from Texas Instruments, in a SOIC-8. Pinout and pin descriptions extracted from the manufacturer datasheet (extract_pins, cross-checked by a second model); symbol, footprint, and 3D from KiCad-official CAD.
Pinout
| Pin | Name | Type | Function |
|---|---|---|---|
| 1 | IN+ | passive | Positive input current pin; current flowing into IN+ is treated as positive, and the IN+/IN- conductor is rated ±420 VPK to GND with 1.8 mΩ resistance. |
| 2 | IN+ | passive | Positive input current pin, internally the same conductor as pin 1; current flowing into IN+ is treated as positive. |
| 3 | IN- | passive | Negative input current pin; part of the isolated 1.8 mΩ current conductor rated ±420 VPK to GND. |
| 4 | IN- | passive | Negative input current pin, internally the same conductor as pin 3, on the isolated high-voltage side. |
| 5 | GND | power_in | Ground reference for the low-voltage side; input voltages are specified relative to this pin. |
| 6 | NC | unconnected | No connection; pin tolerates capacitive or resistive connection to GND or VS (1 MΩ input impedance for GND < VNC < VS), and shorting to GND is recommended if acceptable. |
| 7 | VOUT | output | Analog output voltage proportional to input current (400 mV/A for A4B) with zero-current output of 0.5 × VS, swinging between GND and VS. |
| 8 | VS | power_in | Supply voltage of 4.5 V to 5.5 V for the TMCS1107A4B (absolute max 6 V), with a 0.1 µF low-ESR decoupling capacitor to GND recommended. |
Key specifications
| Parameter | Value |
|---|---|
| Manufacturer | Texas Instruments |
| Package | SOIC-8 |
| Category | Solders / Accessories / Batteries |
| Pins | 8 |
Electrical characteristics
Limits as printed in the datasheet (page.json metadata.characteristics carries them as data).
| Parameter | Symbol | Min | Typ | Max | Unit | Conditions | Page |
|---|---|---|---|---|---|---|---|
| Sensitivity error | -1.2 | 0.4 | 1.2 | % | 0.05V ≤ VOUT ≤ VS, 0.2V, TA = 25ºC | 8 | |
| Sensitivity error incl. lifetime and environmental drift | -1.8 | 0.7 | 1.8 | % | 0.05V ≤ VOUT ≤ VS, 0.2V, TA = 25ºC | 8 | |
| Sensitivity error | -1.8 | 0.7 | 1.8 | % | 0.05V ≤ VOUT ≤ VS, 0.2V, TA = -40ºC to +85ºC | 8 | |
| Sensitivity error | -2.25 | 0.9 | 2.25 | % | 0.05V ≤ VOUT ≤ VS, 0.2V, TA = -40ºC to +125ºC | 8 | |
| Sensitivity | 400 | mV/A | TMCS1107A4B | 8 | |||
| Nonlinearity error | 0.5 | % | VOUT = 0.5V to VS, 0.5V | 8 | |||
| Output voltage offset error | VOE | -30 | 5 | 30 | mV | TMCS1107A4B | 8 |
| Output voltage temperature drift | -170 | 40 | 170 | µV/℃ | TMCS1107A4B, TA = -40ºC to +125ºC | 8 | |
| Offset error, RTI | IOS | -75 | 12.5 | 75 | mA | TMCS1107A4B | 9 |
| Offset error temperature drift, RTI | -425 | 100 | 425 | µA/°C | TMCS1107A4B, TA = -40ºC to +125ºC | 9 | |
| Power supply rejection ratio | PSRR | -6.5 | 1 | 6.5 | mV/V | VS = 3V to 5.5V, TA= -40ºC to +125ºC | 9 |
| Common-mode transient immunity | CMTI | 50 | kV/µs | 9 | |||
| Common-mode rejection ratio, RTI | CMRR | 5 | uA/V | DC to 60Hz | 9 | ||
| Zero current VOUT | 0.5 | V/V | TMCS1107AxB, 0.5*VS | 9 | |||
| Noise density, RTI | 225 | μA/√Hz | TMCS1107A4B | 9 | |||
| Input conductor resistance | RIN | 1.8 | mΩ | IN+ to IN- | 9 | ||
| Input conductor resistance temperature drift | 4.4 | μΩ/°C | TA= -40ºC to +125ºC | 9 | |||
| Magnetic coupling factor | G | 1.1 | mT/A | TA = 25ºC | 9 | ||
| Allowable continuous RMS current | IIN,max | 30 | A | TA = 25ºC | 9 | ||
| Allowable continuous RMS current | IIN,max | 25 | A | TA = 85ºC | 9 | ||
| Allowable continuous RMS current | IIN,max | 22.5 | A | TA = 105ºC | 9 | ||
| Allowable continuous RMS current | IIN,max | 16 | A | TA = 125ºC | 9 | ||
| NC (pin 6) input impedance | 1 | MΩ | Within allowable range, GND < VNC < VS | 9 | |||
| Closed-loop output impedance | ZOUT | 0.2 | Ω | f = 1 Hz to 1 kHz | 9 | ||
| Closed-loop output impedance | ZOUT | 2 | Ω | f = 10kHz | 9 | ||
| Maximum capacitive load | 1 | nF | No sustained oscillation | 9 | |||
| Operating supply voltage range | VS | 3 | 5.5 | V | 1 | ||
| Maximum supply current | 6 | mA | 1 | ||||
| Operating temperature range | TA | -40 | 125 | °C | 1 | ||
| Signal bandwidth | 80 | kHz | -3dB, all gains | 22 | |||
| Safety input current (side 1) | IS | 30 | A | RθJA = 36.6°C/W, TJ = 150°C, TA = 25°C | 7 | ||
| Safety input, output, or supply current (side 2) | IS | 0.68 | A | RθJA = 36.6°C/W, VI = 5V, TJ = 150°C, TA = 25°C | 7 | ||
| Safety input, output, or total power | PS | 3.4 | W | RθJA = 36.6°C/W, TJ = 150°C, TA = 25°C | 7 | ||
| Safety temperature | TS | 150 | ℃ | 7 |
CAD (KiCad official)
- Symbol:
TMCS1107A4BQDR - Footprint:
Package_SO:SOIC-8_3.9x4.9mm_P1.27mm - 3D model: SOIC-8 (KiCad packages3D, STEP)
- 3D model files:
tmcs1107a4bqdr-etched.step/tmcs1107a4bqdr-etched.glbcarry the MPN laser-etched on the die in a toggleableAdom.LaserEtchgroup (Fusion-ready);tmcs1107a4bqdr.step/tmcs1107a4bqdr.glbare the bare package body.
Provenance
Data extracted from the manufacturer datasheet, not a distributor listing:
- Datasheet: Texas Instruments datasheet (45 pp, sha256
a6ac0ae9d7791cd1, retrieved 2026-10-26, tier: manufacturer) - Datasheet language: Chinese. Pin names, descriptions, and specs on this page were extracted and translated to English by ds2sf; the linked PDF is the manufacturer original.
- Extractor: parts-factory
2.0.0/extract_pins 0.3, primaryclaude-sonnet-5-5(text), consensusclaude-sonnet-5-5(agreed), guards: pin_guards 0.1: passed. Pins are checked against the footprint pad set and their cited datasheet pages before publish. - CAD: KiCad official libraries (CC-BY-SA 4.0).