3D Model
Open in new tab ↗
Loads when you scroll to it. Unloads after 5 minutes in the background.
Symbol & Footprint
Schematic Symbol
Open full view ↗Loads when you scroll to it. Unloads after 5 minutes in the background.
PCB Footprint
Open full view ↗Loads when you scroll to it. Unloads after 5 minutes in the background.
Datasheet
Open in new tab ↗Loads when you scroll to it. Unloads after 5 minutes in the background.
README
markdownMAX14919AATP+T
Analog Devices Inc./Maxim Integrated · Motor Driver ICs · TQFN-20(4x5)
MAX14919AATP+T from Analog Devices Inc./Maxim Integrated, in a TQFN-20(4x5). Pinout and pin descriptions extracted from the manufacturer datasheet (extract_pins, cross-checked by a second model); symbol, footprint, and 3D from KiCad-official CAD.
Pinout
| Pin | Name | Type | Function |
|---|---|---|---|
| 1 | PGND | power_in | Power ground, connect to the exposed pad (EP). |
| 2 | PGND | power_in | Power ground, connect to the exposed pad (EP). |
| 3 | OUT2 | passive | Low-side switch 2 output. |
| 4 | OUT3 | passive | Low-side switch 3 output. |
| 5 | PGND | power_in | Power ground, connect to the exposed pad (EP). |
| 6 | PGND | power_in | Power ground, connect to the exposed pad (EP). |
| 7 | OUT4 | passive | Low-side switch 4 output. |
| 8 | VL | power_in | Logic supply, connect 1.6V to 5.5V here with a 100nF bypass capacitor. |
| 9 | RCLIM | passive | Load current-limit control pin, connect a resistor to GND to set the maximum load current through each switch. |
| 10 | REV | output | Reverse-current logic output, open-drain with 45µA internal pullup to V5 on the MAX14919 and plain open-drain on the MAX14919A. |
| 11 | FAULT | output | Global overload open-drain output that pulls low on thermal overload or chip thermal shutdown, with a pullup resistor to VL. |
| 12 | IN4 | input | Switch 4 control logic input with weak pulldown to GND, drive high to close the OUT4 switch. |
| 13 | IN3 | input | Switch 3 control logic input with weak pulldown to GND, drive high to close the OUT3 switch. |
| 14 | GND | power_in | Analog ground, connect to the exposed pad (EP). |
| 15 | IN2 | input | Switch 2 control logic input with weak pulldown to GND, drive high to close the OUT2 switch. |
| 16 | IN1 | input | Switch 1 control logic input with weak pulldown to GND, drive high to close the OUT1 switch. |
| 17 | V5 | power_in | 5V supply input or 5V linear regulator output, the primary chip supply, bypass to GND with a 1µF ceramic capacitor. |
| 18 | VDD | power_in | 24V supply input to the linear regulator (7V to 60V), bypass with 1µF to GND, and connect to GND or leave unconnected if V5 is externally powered. |
| 19 | INRUSH | input | Inrush-enable logic input, drive high to enable 2x current limiting after any switch turn-on and low to disable it. |
| 20 | OUT1 | passive | Low-side switch 1 output. |
| 21 | EP | passive | Exposed pad (from the footprint; not named in the datasheet pin table). |
Key specifications
| Parameter | Value |
|---|---|
| Manufacturer | Analog Devices Inc./Maxim Integrated |
| Package | TQFN-20(4x5) |
| Category | Power Management |
| Pins | 21 |
Electrical characteristics
Limits as printed in the datasheet (page.json metadata.characteristics carries them as data).
| Parameter | Symbol | Min | Typ | Max | Unit | Conditions | Page |
|---|---|---|---|---|---|---|---|
| V5 Supply Voltage | V5 | 4.5 | 5 | 5.5 | V | VDD = GND or unconnected | 4 |
| V5 Supply Current | IV5_ON | 1.6 | 3 | mA | VDD = GND or unconnected, All OUT_ turned on or off | 4 | |
| V5 Undervoltage-Lockout Threshold | V5_UVLO | 3.6 | 4.2 | V | VDD = GND or unconnected, OUT_ are three-state in UVLO, V5 falling | 4 | |
| VL Supply Voltage | VL | 1.62 | 5.5 | V | 4 | ||
| VL Supply Current | IVL | 20 | µA | Logic inputs at GND or VL | 4 | ||
| VL Undervoltage-Lockout Threshold | VL_UVLO | 0.7 | 1.4 | V | VL falling | 4 | |
| VDD Supply-Voltage Range | VDD | 7 | 60 | V | 4 | ||
| VDD Supply Current | IDD | 1.7 | 3 | mA | V5 = No Load | 4 | |
| V5 Regulator Output Voltage | V5 | 4.75 | 5 | 5.25 | V | 0mA to 30mA external load current | 4 |
| On-Resistance | RON | 140 | 300 | mΩ | IOUT_= 600mA | 4 | |
| Current Limit | ILIM | 140 | 270 | mA | INRUSH = 0, or INRUSH = 1 and tLIM > 15ms, RLIM = 100kΩ | 4 | |
| Current Limit | ILIM | 700 | 800 | 900 | mA | INRUSH = 0, or INRUSH = 1 and tLIM > 15ms, RLIM = 27kΩ | 4 |
| Current Limit | ILIM | 650 | 950 | mA | INRUSH = 0, or INRUSH = 1 and tLIM > 15ms, RLIM = open | 4 | |
| Inductive Clamp Voltage | VCLAMP | 49 | 55 | V | OUT_ is OFF, IOUT_= 500mA | 4 | |
| Off-State Leakage Current at OUT_ | ILEAK | -15 | 15 | µA | IN_= low, VOUT_ = 0V to 45V | 4 | |
| CLIM Short Resistance-Threshold Value | RLIM_SHORT | 4.5 | 6.5 | 9 | kΩ | 4 | |
| CLIM Open Resistance-Threshold Value | RLIM_OPEN | 400 | 650 | 1000 | kΩ | 4 | |
| Switch Turn-Off Propagation Delay | tOFF | 105 | 300 | ns | IN_ low to OUT_ rising by 0.5V, RL = 48Ω, CL = 0.1nF, VLOAD = 24V | 4 | |
| Switch Turn-On Propagation Delay | tON | 70 | 300 | ns | IN_ high to OUT_ falling by 0.5V, RL = 48Ω, VLOAD = 24V | 5 | |
| Output Fall-Time | tF | 160 | 250 | ns | 80% to 20% of final value, VLOAD = 24V, RL = 48Ω CL = 0.1nF | 5 | |
| Reverse Current-Detect Threshold (on) | ITH_OUT_REV_ON | -190 | -150 | -115 | mA | V5 > V5_UVLO, IN_= high, current flow out of any OUT_ | 5 |
| Reverse Current-Detect Threshold (off) | ITH_OUT_REV_OFF | -200 | -150 | -95 | mA | V5 > V5_UVLO, IN_ = low, current flow out of any OUT_ | 5 |
| REV Output-Pullup Current | IREV_ON | 25 | 45 | µA | MAX14919 only, V5 > V5_UVLO, IOUT_> ITH_OUT_REV, VREV = V5 - 1V | 5 | |
| Three-State Leakage (REV) | IREV_LKG | 10 | nA | MAX14919A only | 5 | ||
| Output Logic Low | VOL | 0.33 | V | ILOAD = 5mA | 5 | ||
| Three-State Leakage (FAULT) | ILKG | -1 | 1 | µA | Open-drain output off, VPULLUP = 5V | 5 | |
| Surge Tolerance | VSURGE | -1 | 1 | kV | OUT_ to GND, IEC 61000-4-5 with 42Ω | 5 | |
| ESD IEC Contact Discharge | VESD_C | -8 | 8 | kV | OUT_ to GND, IEC 61000-4-2 | 5 | |
| ESD IEC Air Discharge | VESD_A | -25 | 25 | kV | OUT_ to GND, IEC 61000-4-2 | 6 | |
| ESD Human Body Model | VESD | -2 | 2 | kV | All other pins. Human Body Model | 6 | |
| VDD to GND | VDD | -0.3 | 65 | V | 3 | ||
| V5 to GND | V5 | -0.3 | 6 | V | 3 | ||
| VL, FAULT to GND | VL, FAULT | -0.3 | 6 | V | 3 | ||
| IN_ to GND | IN_ | -0.3 | 6 | V | 3 | ||
| OUT_ Load Current (Continuous DC) | 800 | mA | 3 | ||||
| Continuous Current (any other terminal) | -100 | 100 | mA | 3 | |||
| Operating Temperature Range | -40 | 125 | °C | 3 | |||
| Storage Temperature Range | -65 | 150 | °C | 3 | |||
| V5 Undervoltage-Lockout Hysteresis | V5_UVLO_HYS | 0.2 | V | VDD = GND or unconnected | 4 | ||
| VL Undervoltage-Lockout Hysteresis | VL_UVLO_HYS | 50 | mV | 4 | |||
| V5 Regulator Current Limit | ICL_V5 | 35 | mA | 4 | |||
| V5 Line Regulation | 0.002 | mV/V | 7V ≤ VDD ≤ 60V, IV5 = 5mA | 4 | |||
| V5 Load Regulation | 0.175 | % | 0 ≤ IV5 ≤ 20mA | 4 | |||
| CLIM Voltage | VCLIM | 1.2 | V | 4 | |||
| REV Output-Pulldown Resistance | RREV_OFF | 10 | Ω | V5 > V5_UVLO, IOUT_ < ITH_OUT_REV | 5 | ||
| Auto-Retry Delay | tREV_AR | 2 | s | MAX14919 only | 5 | ||
| Input-Threshold Hysteresis | VI_TH | 0.1 | V | 5 | |||
| Input-Pulldown Resistor | RPULLDOWN | 200 | kΩ | All logic input pins | 5 | ||
| Channel Thermal-Shutdown Temperature | TJSHDN | 160 | °C | Junction temperature rising, per channel | 5 | ||
| Channel Thermal-Shutdown Hysteresis | TJSHDN_HYST | 15 | °C | 5 | |||
| Chip Thermal Shutdown | TCSHDN | 150 | °C | Temperature rising | 5 | ||
| Chip Thermal-Shutdown Hysteresis | TCSHDN_HYST | 10 | °C | 5 | |||
| LDO Shutdown Temperature | TDSHDN | 160 | °C | Temperature rising | 5 | ||
| Junction-to-Ambient Thermal Resistance, 20-TQFN | θJA | 30.34 | °C/W | Four-layer board | 3 | ||
| Junction-to-Case Thermal Resistance, 20-TQFN | θJC | 1.98 | °C/W | Four-layer board | 3 |
CAD (KiCad official)
- Symbol:
MAX14919AATP+T - Footprint:
Package_DFN_QFN:QFN-20-1EP_4x5mm_P0.5mm_EP2.65x3.65mm - 3D model: TQFN-20(4x5) (KiCad packages3D, STEP)
- 3D model files:
max14919aatp-t-etched.step/max14919aatp-t-etched.glbcarry the MPN laser-etched on the die in a toggleableAdom.LaserEtchgroup (Fusion-ready);max14919aatp-t.step/max14919aatp-t.glbare the bare package body.
Provenance
Data extracted from the manufacturer datasheet, not a distributor listing:
- Datasheet: Analog Devices Inc./Maxim Integrated datasheet (19 pp, sha256
829311e88f935e3b, retrieved 2026-10-31, tier: manufacturer) - Extractor: parts-factory
2.0.0/extract_pins 0.3, primaryclaude-sonnet-5-5(text), consensusclaude-sonnet-5-5(agreed), guards: pin_guards 0.1: passed. Pins are checked against the footprint pad set and their cited datasheet pages before publish. - CAD: KiCad official libraries (CC-BY-SA 4.0).