Loads when you scroll to it. Unloads after 5 minutes in the background.

Symbol & Footprint

Schematic Symbol

Open full view ↗
Loads when you scroll to it. Unloads after 5 minutes in the background.

PCB Footprint

Open full view ↗
Loads when you scroll to it. Unloads after 5 minutes in the background.
Loads when you scroll to it. Unloads after 5 minutes in the background.
Download PDF
Contents

README

markdown

MAX14919AATP+T

Analog Devices Inc./Maxim Integrated · Motor Driver ICs · TQFN-20(4x5)

MAX14919AATP+T from Analog Devices Inc./Maxim Integrated, in a TQFN-20(4x5). Pinout and pin descriptions extracted from the manufacturer datasheet (extract_pins, cross-checked by a second model); symbol, footprint, and 3D from KiCad-official CAD.

Pinout

Pin Name Type Function
1 PGND power_in Power ground, connect to the exposed pad (EP).
2 PGND power_in Power ground, connect to the exposed pad (EP).
3 OUT2 passive Low-side switch 2 output.
4 OUT3 passive Low-side switch 3 output.
5 PGND power_in Power ground, connect to the exposed pad (EP).
6 PGND power_in Power ground, connect to the exposed pad (EP).
7 OUT4 passive Low-side switch 4 output.
8 VL power_in Logic supply, connect 1.6V to 5.5V here with a 100nF bypass capacitor.
9 RCLIM passive Load current-limit control pin, connect a resistor to GND to set the maximum load current through each switch.
10 REV output Reverse-current logic output, open-drain with 45µA internal pullup to V5 on the MAX14919 and plain open-drain on the MAX14919A.
11 FAULT output Global overload open-drain output that pulls low on thermal overload or chip thermal shutdown, with a pullup resistor to VL.
12 IN4 input Switch 4 control logic input with weak pulldown to GND, drive high to close the OUT4 switch.
13 IN3 input Switch 3 control logic input with weak pulldown to GND, drive high to close the OUT3 switch.
14 GND power_in Analog ground, connect to the exposed pad (EP).
15 IN2 input Switch 2 control logic input with weak pulldown to GND, drive high to close the OUT2 switch.
16 IN1 input Switch 1 control logic input with weak pulldown to GND, drive high to close the OUT1 switch.
17 V5 power_in 5V supply input or 5V linear regulator output, the primary chip supply, bypass to GND with a 1µF ceramic capacitor.
18 VDD power_in 24V supply input to the linear regulator (7V to 60V), bypass with 1µF to GND, and connect to GND or leave unconnected if V5 is externally powered.
19 INRUSH input Inrush-enable logic input, drive high to enable 2x current limiting after any switch turn-on and low to disable it.
20 OUT1 passive Low-side switch 1 output.
21 EP passive Exposed pad (from the footprint; not named in the datasheet pin table).

Key specifications

Parameter Value
Manufacturer Analog Devices Inc./Maxim Integrated
Package TQFN-20(4x5)
Category Power Management
Pins 21

Electrical characteristics

Limits as printed in the datasheet (page.json metadata.characteristics carries them as data).

Parameter Symbol Min Typ Max Unit Conditions Page
V5 Supply Voltage V5 4.5 5 5.5 V VDD = GND or unconnected 4
V5 Supply Current IV5_ON 1.6 3 mA VDD = GND or unconnected, All OUT_ turned on or off 4
V5 Undervoltage-Lockout Threshold V5_UVLO 3.6 4.2 V VDD = GND or unconnected, OUT_ are three-state in UVLO, V5 falling 4
VL Supply Voltage VL 1.62 5.5 V 4
VL Supply Current IVL 20 µA Logic inputs at GND or VL 4
VL Undervoltage-Lockout Threshold VL_UVLO 0.7 1.4 V VL falling 4
VDD Supply-Voltage Range VDD 7 60 V 4
VDD Supply Current IDD 1.7 3 mA V5 = No Load 4
V5 Regulator Output Voltage V5 4.75 5 5.25 V 0mA to 30mA external load current 4
On-Resistance RON 140 300 mΩ IOUT_= 600mA 4
Current Limit ILIM 140 270 mA INRUSH = 0, or INRUSH = 1 and tLIM > 15ms, RLIM = 100kΩ 4
Current Limit ILIM 700 800 900 mA INRUSH = 0, or INRUSH = 1 and tLIM > 15ms, RLIM = 27kΩ 4
Current Limit ILIM 650 950 mA INRUSH = 0, or INRUSH = 1 and tLIM > 15ms, RLIM = open 4
Inductive Clamp Voltage VCLAMP 49 55 V OUT_ is OFF, IOUT_= 500mA 4
Off-State Leakage Current at OUT_ ILEAK -15 15 µA IN_= low, VOUT_ = 0V to 45V 4
CLIM Short Resistance-Threshold Value RLIM_SHORT 4.5 6.5 9 kΩ 4
CLIM Open Resistance-Threshold Value RLIM_OPEN 400 650 1000 kΩ 4
Switch Turn-Off Propagation Delay tOFF 105 300 ns IN_ low to OUT_ rising by 0.5V, RL = 48Ω, CL = 0.1nF, VLOAD = 24V 4
Switch Turn-On Propagation Delay tON 70 300 ns IN_ high to OUT_ falling by 0.5V, RL = 48Ω, VLOAD = 24V 5
Output Fall-Time tF 160 250 ns 80% to 20% of final value, VLOAD = 24V, RL = 48Ω CL = 0.1nF 5
Reverse Current-Detect Threshold (on) ITH_OUT_REV_ON -190 -150 -115 mA V5 > V5_UVLO, IN_= high, current flow out of any OUT_ 5
Reverse Current-Detect Threshold (off) ITH_OUT_REV_OFF -200 -150 -95 mA V5 > V5_UVLO, IN_ = low, current flow out of any OUT_ 5
REV Output-Pullup Current IREV_ON 25 45 µA MAX14919 only, V5 > V5_UVLO, IOUT_> ITH_OUT_REV, VREV = V5 - 1V 5
Three-State Leakage (REV) IREV_LKG 10 nA MAX14919A only 5
Output Logic Low VOL 0.33 V ILOAD = 5mA 5
Three-State Leakage (FAULT) ILKG -1 1 µA Open-drain output off, VPULLUP = 5V 5
Surge Tolerance VSURGE -1 1 kV OUT_ to GND, IEC 61000-4-5 with 42Ω 5
ESD IEC Contact Discharge VESD_C -8 8 kV OUT_ to GND, IEC 61000-4-2 5
ESD IEC Air Discharge VESD_A -25 25 kV OUT_ to GND, IEC 61000-4-2 6
ESD Human Body Model VESD -2 2 kV All other pins. Human Body Model 6
VDD to GND VDD -0.3 65 V 3
V5 to GND V5 -0.3 6 V 3
VL, FAULT to GND VL, FAULT -0.3 6 V 3
IN_ to GND IN_ -0.3 6 V 3
OUT_ Load Current (Continuous DC) 800 mA 3
Continuous Current (any other terminal) -100 100 mA 3
Operating Temperature Range -40 125 °C 3
Storage Temperature Range -65 150 °C 3
V5 Undervoltage-Lockout Hysteresis V5_UVLO_HYS 0.2 V VDD = GND or unconnected 4
VL Undervoltage-Lockout Hysteresis VL_UVLO_HYS 50 mV 4
V5 Regulator Current Limit ICL_V5 35 mA 4
V5 Line Regulation 0.002 mV/V 7V ≤ VDD ≤ 60V, IV5 = 5mA 4
V5 Load Regulation 0.175 % 0 ≤ IV5 ≤ 20mA 4
CLIM Voltage VCLIM 1.2 V 4
REV Output-Pulldown Resistance RREV_OFF 10 Ω V5 > V5_UVLO, IOUT_ < ITH_OUT_REV 5
Auto-Retry Delay tREV_AR 2 s MAX14919 only 5
Input-Threshold Hysteresis VI_TH 0.1 V 5
Input-Pulldown Resistor RPULLDOWN 200 kΩ All logic input pins 5
Channel Thermal-Shutdown Temperature TJSHDN 160 °C Junction temperature rising, per channel 5
Channel Thermal-Shutdown Hysteresis TJSHDN_HYST 15 °C 5
Chip Thermal Shutdown TCSHDN 150 °C Temperature rising 5
Chip Thermal-Shutdown Hysteresis TCSHDN_HYST 10 °C 5
LDO Shutdown Temperature TDSHDN 160 °C Temperature rising 5
Junction-to-Ambient Thermal Resistance, 20-TQFN θJA 30.34 °C/W Four-layer board 3
Junction-to-Case Thermal Resistance, 20-TQFN θJC 1.98 °C/W Four-layer board 3

CAD (KiCad official)

  • Symbol: MAX14919AATP+T
  • Footprint: Package_DFN_QFN:QFN-20-1EP_4x5mm_P0.5mm_EP2.65x3.65mm
  • 3D model: TQFN-20(4x5) (KiCad packages3D, STEP)
  • 3D model files: max14919aatp-t-etched.step / max14919aatp-t-etched.glb carry the MPN laser-etched on the die in a toggleable Adom.LaserEtch group (Fusion-ready); max14919aatp-t.step / max14919aatp-t.glb are the bare package body.

Provenance

Data extracted from the manufacturer datasheet, not a distributor listing:

  • Datasheet: Analog Devices Inc./Maxim Integrated datasheet (19 pp, sha256 829311e88f935e3b, retrieved 2026-10-31, tier: manufacturer)
  • Extractor: parts-factory 2.0.0 / extract_pins 0.3, primary claude-sonnet-5-5 (text), consensus claude-sonnet-5-5 (agreed), guards: pin_guards 0.1: passed. Pins are checked against the footprint pad set and their cited datasheet pages before publish.
  • CAD: KiCad official libraries (CC-BY-SA 4.0).

Datasheet PDF