3D Model
Open in new tab ↗
Loads when you scroll to it. Unloads after 5 minutes in the background.
Symbol & Footprint
Schematic Symbol
Open full view ↗Loads when you scroll to it. Unloads after 5 minutes in the background.
PCB Footprint
Open full view ↗Loads when you scroll to it. Unloads after 5 minutes in the background.
Datasheet
Open in new tab ↗Loads when you scroll to it. Unloads after 5 minutes in the background.
Contents
README
markdownGS8041-CR
Gainsil · Operational Amplifier · SC-70-5
GS8041-CR from Gainsil, in a SC-70-5. Pinout and pin descriptions extracted from the manufacturer datasheet by ds2sf; symbol, footprint, and 3D from KiCad-official CAD.
Pinout
| Pin | Name | Type | Function |
|---|---|---|---|
| 1 | OUT | output | Amplifier output. Rail-to-rail output swing; typically within 50 mV of either supply rail with light resistive loads (>50 kΩ). Source/sink current capability of 20 mA into 10 Ω to Vs/2. |
| 2 | VSS | power_in | Negative supply / ground. For single-supply operation tie to 0 V; for dual supply operation connect to the negative rail (-0.7 V to -2.75 V). Bypass to VDD with 0.1 µF ceramic near the pin. |
| 3 | IN+ | input | Non-inverting analog input. Rail-to-rail input common-mode range extends 100 mV beyond the supply rails (VSS-0.1 V to VDD+0.1 V). Typical input bias current of 1 pA. |
| 4 | IN- | input | Inverting analog input. Rail-to-rail input common-mode range extends 100 mV beyond the supply rails (VSS-0.1 V to VDD+0.1 V). Typical input bias current of 1 pA. |
| 5 | VDD | power_in | Positive supply. Operating range 1.4 V to 5.5 V (absolute maximum 7.5 V referenced to VSS). Bypass to VSS with a 0.1 µF ceramic capacitor placed close to the pin. |
Key specifications
| Parameter | Value |
|---|---|
| Manufacturer | Gainsil |
| Package | SC-70-5 |
| Category | Op-amp/Cmp |
| Pins | 5 |
Ordering variants
Same part, different packaging or reel option.
GS8041-CRGS8041-TR
Electrical characteristics
Limits as printed in the datasheet (page.json metadata.characteristics carries them as data).
| Parameter | Symbol | Min | Typ | Max | Unit | Conditions | Page |
|---|---|---|---|---|---|---|---|
| Input Offset Voltage | VOS | 0.4 | 3 | mV | VCM = VS/2 | 3 | |
| Common-Mode Voltage Range | VCM | -0.1 | 5.6 | V | VS = 5.5V | 3 | |
| Common-Mode Rejection Ratio | CMRR | 66 | 78 | dB | VS = 5V, VCM = -0.1V to 2.5V | 3 | |
| Common-Mode Rejection Ratio | CMRR | 67 | 84 | dB | VS = 5V, VCM = -0.1V to 5.1V | 3 | |
| Open-Loop Voltage Gain | AOL | 75 | 86 | dB | Vs=1.4V, RL = 50kΩ, VO = Vs-0.1V | 3 | |
| Open-Loop Voltage Gain | AOL | 84 | 93 | dB | Vs=5V, RL = 50kΩ, VO = Vs-0.1V | 3 | |
| Output Voltage Swing from Rail (high) | VOH | 1.39 | 1.395 | V | Vs=1.4V, RL = 50kΩ | 3 | |
| Output Voltage Swing from Rail (low) | VOL | 4.5 | 10 | mV | Vs=1.4V, RL = 50kΩ | 3 | |
| Output Voltage Swing from Rail (high) | VOH | 4.99 | 4.997 | V | Vs=5V, RL = 50kΩ | 3 | |
| Output Voltage Swing from Rail (low) | VOL | 3.5 | 10 | mV | Vs=5V, RL = 50kΩ | 3 | |
| Operating Voltage Range | 1.4 | 5.5 | V | 3 | |||
| Power Supply Rejection Ratio | PSRR | 77 | 80 | dB | VS = +1.4V to +5.5V, VCM = +0.5V | 3 | |
| Power Supply Voltage (VDD to Vss) | -0.5 | 7.5 | V | 2 | |||
| Operating Temperature Range | -40 | 125 | °C | 2 | |||
| Junction Temperature | 160 | °C | 2 | ||||
| Storage Temperature Range | -55 | 150 | °C | 2 | |||
| Lead Temperature | 260 | °C | soldering, 10sec | 2 | |||
| ESD Susceptibility HBM | 6 | KV | HBM | 2 | |||
| ESD Susceptibility MM | 300 | V | MM | 2 | |||
| Package Thermal Resistance, junction-to-ambient (SC70-5 θJA) | θJA | 333 | °C/W | TA=+25℃ | 2 |
CAD (KiCad official)
- Symbol:
GS8041-CR - Footprint:
Package_TO_SOT_SMD:SOT-353_SC-70-5 - 3D model: SC-70-5 (KiCad packages3D, STEP)
- 3D model files:
gs8041-cr-etched.step/gs8041-cr-etched.glbcarry the MPN laser-etched on the die in a toggleableAdom.LaserEtchgroup (Fusion-ready);gs8041-cr.step/gs8041-cr.glbare the bare package body.
Provenance
Data extracted from the manufacturer datasheet, not a distributor listing:
- Datasheet: Gainsil datasheet (15 pp, sha256
2cfbf0f89a315340, retrieved 2026-08-17, tier: lcsc) - Extractor:
ds2sf(Claude). Every pin and dimension is cited to a datasheet page; it refuses to fabricate. - CAD: KiCad official libraries (CC-BY-SA 4.0).