main
Download ZIP Propose a change
Generated by kicad-footprint-generator · KiCad file format 20260206
Name Last commit message Last updated
docs gs8041-cr: re-etch, flat white mark read from pin 1 (service-occt 1.4.0) + chip hero · Ray
viewers gs8041-cr: viewers · Ray
gs8041-cr-etched.fit.json gs8041-cr: re-etch, flat white mark read from pin 1 (service-occt 1.4.0) + chip hero · Ray
gs8041-cr-etched.glb gs8041-cr: white body in tscircuit (pre-1.8 etch structure under an assembly instance); Ray 2026-10-19: black IC body w… · Ray
gs8041-cr-etched.step gs8041-cr: white body in tscircuit (pre-1.8 etch structure under an assembly instance); Ray 2026-10-19: black IC body w… · Ray
gs8041-cr.glb Publish 0.1.0 · Ray
gs8041-cr.kicad_mod Publish 0.1.0 · Ray
gs8041-cr.kicad_sym Publish 0.1.0 · Ray
gs8041-cr.lbr Publish 0.1.0 · Ray
gs8041-cr.step Publish 0.1.0 · Ray
package.json Publish 0.1.0 · Ray
page.json gs8041-cr: white body in tscircuit (pre-1.8 etch structure under an assembly instance); Ray 2026-10-19: black IC body w… · Ray
README.md gs8041-cr: specified limits as data (metadata.characteristics, 20 rows from the datasheet) · Ray

GS8041-CR

Gainsil · Operational Amplifier · SC-70-5

GS8041-CR from Gainsil, in a SC-70-5. Pinout and pin descriptions extracted from the manufacturer datasheet by ds2sf; symbol, footprint, and 3D from KiCad-official CAD.

Pinout

Pin Name Type Function
1 OUT output Amplifier output. Rail-to-rail output swing; typically within 50 mV of either supply rail with light resistive loads (>50 kΩ). Source/sink current capability of 20 mA into 10 Ω to Vs/2.
2 VSS power_in Negative supply / ground. For single-supply operation tie to 0 V; for dual supply operation connect to the negative rail (-0.7 V to -2.75 V). Bypass to VDD with 0.1 µF ceramic near the pin.
3 IN+ input Non-inverting analog input. Rail-to-rail input common-mode range extends 100 mV beyond the supply rails (VSS-0.1 V to VDD+0.1 V). Typical input bias current of 1 pA.
4 IN- input Inverting analog input. Rail-to-rail input common-mode range extends 100 mV beyond the supply rails (VSS-0.1 V to VDD+0.1 V). Typical input bias current of 1 pA.
5 VDD power_in Positive supply. Operating range 1.4 V to 5.5 V (absolute maximum 7.5 V referenced to VSS). Bypass to VSS with a 0.1 µF ceramic capacitor placed close to the pin.

Key specifications

Parameter Value
Manufacturer Gainsil
Package SC-70-5
Category Op-amp/Cmp
Pins 5

Ordering variants

Same part, different packaging or reel option.

  • GS8041-CR
  • GS8041-TR

Electrical characteristics

Limits as printed in the datasheet (page.json metadata.characteristics carries them as data).

Parameter Symbol Min Typ Max Unit Conditions Page
Input Offset Voltage VOS 0.4 3 mV VCM = VS/2 3
Common-Mode Voltage Range VCM -0.1 5.6 V VS = 5.5V 3
Common-Mode Rejection Ratio CMRR 66 78 dB VS = 5V, VCM = -0.1V to 2.5V 3
Common-Mode Rejection Ratio CMRR 67 84 dB VS = 5V, VCM = -0.1V to 5.1V 3
Open-Loop Voltage Gain AOL 75 86 dB Vs=1.4V, RL = 50kΩ, VO = Vs-0.1V 3
Open-Loop Voltage Gain AOL 84 93 dB Vs=5V, RL = 50kΩ, VO = Vs-0.1V 3
Output Voltage Swing from Rail (high) VOH 1.39 1.395 V Vs=1.4V, RL = 50kΩ 3
Output Voltage Swing from Rail (low) VOL 4.5 10 mV Vs=1.4V, RL = 50kΩ 3
Output Voltage Swing from Rail (high) VOH 4.99 4.997 V Vs=5V, RL = 50kΩ 3
Output Voltage Swing from Rail (low) VOL 3.5 10 mV Vs=5V, RL = 50kΩ 3
Operating Voltage Range 1.4 5.5 V 3
Power Supply Rejection Ratio PSRR 77 80 dB VS = +1.4V to +5.5V, VCM = +0.5V 3
Power Supply Voltage (VDD to Vss) -0.5 7.5 V 2
Operating Temperature Range -40 125 °C 2
Junction Temperature 160 °C 2
Storage Temperature Range -55 150 °C 2
Lead Temperature 260 °C soldering, 10sec 2
ESD Susceptibility HBM 6 KV HBM 2
ESD Susceptibility MM 300 V MM 2
Package Thermal Resistance, junction-to-ambient (SC70-5 θJA) θJA 333 °C/W TA=+25℃ 2

CAD (KiCad official)

  • Symbol: GS8041-CR
  • Footprint: Package_TO_SOT_SMD:SOT-353_SC-70-5
  • 3D model: SC-70-5 (KiCad packages3D, STEP)
  • 3D model files: gs8041-cr-etched.step / gs8041-cr-etched.glb carry the MPN laser-etched on the die in a toggleable Adom.LaserEtch group (Fusion-ready); gs8041-cr.step / gs8041-cr.glb are the bare package body.

Provenance

Data extracted from the manufacturer datasheet, not a distributor listing:

  • Datasheet: Gainsil datasheet (15 pp, sha256 2cfbf0f89a315340, retrieved 2026-08-17, tier: lcsc)
  • Extractor: ds2sf (Claude). Every pin and dimension is cited to a datasheet page; it refuses to fabricate.
  • CAD: KiCad official libraries (CC-BY-SA 4.0).

Datasheet PDF