Loads when you scroll to it. Unloads after 5 minutes in the background.

Symbol & Footprint

Schematic Symbol

Open full view ↗
Loads when you scroll to it. Unloads after 5 minutes in the background.

PCB Footprint

Open full view ↗
Loads when you scroll to it. Unloads after 5 minutes in the background.
Loads when you scroll to it. Unloads after 5 minutes in the background.
Download PDF
Contents

README

markdown

PIC16F1618-I

Microchip Tech · Microcontroller Units (MCUs/MPUs/SOCs) · PDIP-20

PIC16F1618-I from Microchip Tech, in a PDIP-20. Pinout and pin descriptions extracted from the manufacturer datasheet (extract_pins, cross-checked by a second model); symbol, footprint, and 3D from KiCad-official CAD.

Pinout

Pin Name Type Function
1 VDD power_in Positive supply; the PIC16F1618 operating voltage range is 2.3V to 5.5V (the PIC16LF1618 is 1.8V to 3.6V).
2 RA5 bidirectional General purpose I/O (CMOS/open-drain output, individually programmable pull-up and interrupt-on-change) that also serves as CLKIN external clock input in EC mode, with T1CKI, T2IN, CLCIN3 and SMTWIN1 alternate inputs.
3 RA4 bidirectional General purpose I/O that also provides AN3 ADC input, T1G and SMTSIG1 inputs, and the CLKOUT FOSC/4 output.
4 MCLR/VPP/RA3 input Input-only general purpose pin with interrupt-on-change and weak pull-up; when MCLR is enabled it is the Host Clear input with internal pull-up, and VPP is the high-voltage programming pin.
5 RC5 bidirectional General purpose I/O that can sink or source up to 100mA when its high drive enable bit HIDC5 is set, with T3CKI, ATIN and HIC5 alternate functions.
6 RC4 bidirectional General purpose I/O that can sink or source up to 100mA when its high drive enable bit HIDC4 is set, with T3G and CLCIN1 inputs and HIC4 high current I/O.
7 RC3 input General purpose input with interrupt-on-change and weak pull-up, with AN7 ADC input, C1IN3-/C2IN3- comparator negative inputs, T5G, CCP2, CLCIN0 and ATCC alternate functions.
8 RC6 bidirectional General purpose I/O that also provides AN8 ADC input and SS (SPI client select) input.
9 RC7 bidirectional General purpose I/O that also provides AN9 ADC input.
10 RB7 bidirectional General purpose I/O that also provides the CK USART synchronous clock.
11 RB6 bidirectional General purpose I/O that also provides the SCK SPI clock.
12 RB5 bidirectional General purpose I/O that also provides AN11 ADC input and RX USART asynchronous input.
13 RB4 bidirectional General purpose I/O that also provides AN10 ADC input and SDI SPI data input.
14 RC2 bidirectional General purpose I/O that also provides AN6 ADC input and C1IN2-/C2IN2- comparator negative inputs.
15 RC1 bidirectional General purpose I/O that also provides AN5 ADC input, C1IN1-/C2IN1- comparator negative inputs, T4IN, CLCIN2 and SMTSIG2 inputs.
16 RC0 bidirectional General purpose I/O that also provides AN4 ADC input, C2IN+ comparator positive input and T5CKI timer clock input.
17 RA2 bidirectional General purpose I/O that also provides AN2 ADC input, T0CKI, CWG1IN, ZCD1IN and the external interrupt INT input.
18 RA1 bidirectional General purpose I/O that also provides AN1 ADC input, VREF+ voltage reference input, C1IN0-/C2IN0- comparator negative inputs and ICSPCLK programming clock.
19 RA0 bidirectional General purpose I/O that also provides AN0 ADC input, C1IN+ comparator positive input, DAC1OUT output and ICSPDAT programming data I/O.
20 VSS power_in Ground reference.

Key specifications

Parameter Value
Manufacturer Microchip Tech
Package PDIP-20
Category Single Chip Microcomputer/Microcontroller
Pins 20

Electrical characteristics

Limits as printed in the datasheet (page.json metadata.characteristics carries them as data).

Parameter Symbol Min Typ Max Unit Conditions Page
Ambient temperature under bias -40 125 °C 513
Storage temperature -65 150 °C 513
Voltage on VDD pin VDD -0.3 6.5 V With respect to VSS, PIC16F1614/8 513
Voltage on MCLR pin -0.3 9 V With respect to VSS 513
Maximum current on VDD pin 250 mA -40°C ≤ TA ≤ +85°C 513
Maximum current on VDD pin 85 mA +85°C ≤ TA ≤ +125°C 513
Sunk by any standard I/O pin 50 mA 513
Sourced by any standard I/O pin 50 mA 513
Sunk by any High Current I/O pin 100 mA 513
Sourced by any High Current I/O pin 100 mA 513
Clamp current IK 20 mA VPIN < 0 or VPIN > VDD 513
Operating ambient temperature, industrial TA -40 85 °C Industrial Temperature 514
Operating ambient temperature, extended TA -40 125 °C Extended Temperature 514
Supply Voltage VDD 2.3 5.5 V FOSC ≤ 16 MHz 516
Supply Voltage VDD 2.5 5.5 V FOSC ≤ 32 MHz 516
RAM Data Retention Voltage VDR 1.7 V Device in Sleep mode 516
FVR Gain Voltage Accuracy for ADC VADFVR -4 4 % 1x VFVR, VDD ≥ 2.5V; 2x VFVR, VDD ≥ 2.5V 516
FVR Gain Voltage Accuracy for ADC VADFVR -5 5 % 1x VFVR, VDD ≥ 2.5V; 2x VFVR, VDD ≥ 2.5V; 4x VFVR, VDD ≥ 4.75V 516
FVR Gain Voltage Accuracy for Comparator/DAC VCDAFVR -4 4 % 1x VFVR, VDD ≥ 2.5V; 2x VFVR, VDD ≥ 2.5V 516
FVR Gain Voltage Accuracy for Comparator/DAC VCDAFVR -7 7 % 1x VFVR, VDD ≥ 2.5V; 2x VFVR, VDD ≥ 2.5V; 4x VFVR, VDD ≥ 4.75V 516
VDD Rise Rate SVDD 0.05 V/ms Ensures that the Power-on Reset signal is released properly 516
Supply current (FOSC = 16 MHz HFINTOSC) IDD 780 1500 µA VDD = 2.3V 518
Supply current (FOSC = 16 MHz HFINTOSC) IDD 1000 1900 µA VDD = 3.0V 518
Supply current (FOSC = 16 MHz HFINTOSC) IDD 1090 2100 µA VDD = 5.0V 518
Supply current (FOSC = 32 MHz HFINTOSC) IDD 1.6 5 mA VDD = 3.0V 519
Supply current (FOSC = 32 MHz HFINTOSC) IDD 1.9 6 mA VDD = 5.0V 519
Base power-down current, Low-Power Sleep mode IPD 0.3 4 µA VDD = 3.0V; WDT, BOR, FVR disabled, all peripherals inactive; max at +125°C = 12 µA 520
Input Low Voltage, TTL buffer VIL 0.8 V 4.5V ≤ VDD ≤ 5.5V 522
Input High Voltage, TTL buffer VIH 2 V 4.5V ≤ VDD ≤ 5.5V 522
Input Leakage Current, I/O ports IIL -125 5 125 nA VSS ≤ VPIN ≤ VDD, pin at high-impedance, 85°C 522
Input Leakage Current, MCLR IIL -200 50 200 nA VSS ≤ VPIN ≤ VDD, pin at high-impedance, 85°C 522
Output Low Voltage, I/O ports VOL 0.6 V IOL = 8.0 mA, VDD = 5.0V; IOL = 6.0 mA, VDD = 3.3V; IOL = 1.8 mA, VDD = 1.8V 522
All I/O pins capacitance CIO 50 pF 522
Voltage on MCLR/VPP pin for high-voltage programming VIHH 8 9 V (Note 2) 523
VDD for Bulk Erase VBE 2.7 V 523
Cell Endurance (program flash) EP 10 K E/W -40°C ≤ TA ≤ +85°C (Note 1) 523
Self-timed Write Cycle Time TIW 2 2.5 ms 523
External CLKIN Frequency (ECH) FOSC 32 MHz External Clock (ECH) 526
Instruction Cycle Time TCY 200 ns TCY = 4/FOSC 526
HFINTOSC wake-up from Sleep start-up time TWARM 5 15 µs 527
On-chip VCO system frequency FSYS 16 32 MHz 528
PLL start-up time (lock time) TRC 2 ms 528
Watchdog Timer time-out period, low-power TWDTLP 10 16 27 ms VDD = 3.3V-5V, 1:512 prescaler used 531
Power-up Timer period TPWRT 40 65 140 ms PWRTE = 0 531
Brown-out Reset voltage VBOR 2.55 2.7 2.85 V BORV = 0 531
Brown-out Reset voltage VBOR 2.35 2.45 2.58 V BORV = 1 (PIC16F1614/8) 531
Low-Power Brown-Out Reset voltage VLPBOR 1.8 2.1 2.5 V LPBOR = 1 531
T0CKI high pulse width TT0H 10 ns With prescaler 532
T1CKI high time TT1H 30 ns Asynchronous 532
Delay from external clock edge to Timer1 increment TCKEZTMR1 2 7 TOSC Timers in Sync mode 532
Integral Error EIL -1.7 1 1.7 LSb VREF = 3.0V 533
Offset Error EOFF -2.5 1 2.5 LSb VREF = 3.0V 533
Gain Error EGN -2 1 2 LSb VREF = 3.0V 533
ADC clock period (FOSC-based) TAD 1 6 µs FOSC-based 534
Input Offset Voltage Vioff -60 7.5 60 mV CxSP = 1, Vicm = VDD/2 535
Response Time Rising Edge Tresp 400 800 ns CxSP = 1 535
Maximum Junction Temperature TJMAX 150 °C 524
Thermal Resistance Junction to Ambient, 20-pin DIP JA 62.2 C/W 20-pin DIP package 524
Thermal Resistance Junction to Case, 20-pin DIP JC 27.5 C/W 20-pin DIP package 524

CAD (KiCad official)

  • Symbol: PIC16F1618-I
  • Footprint: Package_DIP:DIP-20_W7.62mm
  • 3D model: PDIP-20 (KiCad packages3D, STEP)
  • 3D model files: pic16f1618-i-etched.step / pic16f1618-i-etched.glb carry the MPN laser-etched on the die in a toggleable Adom.LaserEtch group (Fusion-ready); pic16f1618-i.step / pic16f1618-i.glb are the bare package body.

Provenance

Data extracted from the manufacturer datasheet, not a distributor listing:

  • Datasheet: Microchip Tech datasheet (585 pp, sha256 70101a4a3c06f10e, retrieved 2026-10-30, tier: manufacturer)
  • Extractor: parts-factory 2.0.0 / extract_pins 0.3, primary claude-haiku-5-5 (text), consensus claude-sonnet-5-5 (agreed), guards: pin_guards 0.1: passed. Pins are checked against the footprint pad set and their cited datasheet pages before publish.
  • CAD: KiCad official libraries (CC-BY-SA 4.0).

Datasheet PDF