3D Model
Open in new tab ↗
Loads when you scroll to it. Unloads after 5 minutes in the background.
Symbol & Footprint
Schematic Symbol
Open full view ↗Loads when you scroll to it. Unloads after 5 minutes in the background.
PCB Footprint
Open full view ↗Loads when you scroll to it. Unloads after 5 minutes in the background.
Datasheet
Open in new tab ↗Loads when you scroll to it. Unloads after 5 minutes in the background.
README
markdownPIC16F1618-I
Microchip Tech · Microcontroller Units (MCUs/MPUs/SOCs) · PDIP-20
PIC16F1618-I from Microchip Tech, in a PDIP-20. Pinout and pin descriptions extracted from the manufacturer datasheet (extract_pins, cross-checked by a second model); symbol, footprint, and 3D from KiCad-official CAD.
Pinout
| Pin | Name | Type | Function |
|---|---|---|---|
| 1 | VDD | power_in | Positive supply; the PIC16F1618 operating voltage range is 2.3V to 5.5V (the PIC16LF1618 is 1.8V to 3.6V). |
| 2 | RA5 | bidirectional | General purpose I/O (CMOS/open-drain output, individually programmable pull-up and interrupt-on-change) that also serves as CLKIN external clock input in EC mode, with T1CKI, T2IN, CLCIN3 and SMTWIN1 alternate inputs. |
| 3 | RA4 | bidirectional | General purpose I/O that also provides AN3 ADC input, T1G and SMTSIG1 inputs, and the CLKOUT FOSC/4 output. |
| 4 | MCLR/VPP/RA3 | input | Input-only general purpose pin with interrupt-on-change and weak pull-up; when MCLR is enabled it is the Host Clear input with internal pull-up, and VPP is the high-voltage programming pin. |
| 5 | RC5 | bidirectional | General purpose I/O that can sink or source up to 100mA when its high drive enable bit HIDC5 is set, with T3CKI, ATIN and HIC5 alternate functions. |
| 6 | RC4 | bidirectional | General purpose I/O that can sink or source up to 100mA when its high drive enable bit HIDC4 is set, with T3G and CLCIN1 inputs and HIC4 high current I/O. |
| 7 | RC3 | input | General purpose input with interrupt-on-change and weak pull-up, with AN7 ADC input, C1IN3-/C2IN3- comparator negative inputs, T5G, CCP2, CLCIN0 and ATCC alternate functions. |
| 8 | RC6 | bidirectional | General purpose I/O that also provides AN8 ADC input and SS (SPI client select) input. |
| 9 | RC7 | bidirectional | General purpose I/O that also provides AN9 ADC input. |
| 10 | RB7 | bidirectional | General purpose I/O that also provides the CK USART synchronous clock. |
| 11 | RB6 | bidirectional | General purpose I/O that also provides the SCK SPI clock. |
| 12 | RB5 | bidirectional | General purpose I/O that also provides AN11 ADC input and RX USART asynchronous input. |
| 13 | RB4 | bidirectional | General purpose I/O that also provides AN10 ADC input and SDI SPI data input. |
| 14 | RC2 | bidirectional | General purpose I/O that also provides AN6 ADC input and C1IN2-/C2IN2- comparator negative inputs. |
| 15 | RC1 | bidirectional | General purpose I/O that also provides AN5 ADC input, C1IN1-/C2IN1- comparator negative inputs, T4IN, CLCIN2 and SMTSIG2 inputs. |
| 16 | RC0 | bidirectional | General purpose I/O that also provides AN4 ADC input, C2IN+ comparator positive input and T5CKI timer clock input. |
| 17 | RA2 | bidirectional | General purpose I/O that also provides AN2 ADC input, T0CKI, CWG1IN, ZCD1IN and the external interrupt INT input. |
| 18 | RA1 | bidirectional | General purpose I/O that also provides AN1 ADC input, VREF+ voltage reference input, C1IN0-/C2IN0- comparator negative inputs and ICSPCLK programming clock. |
| 19 | RA0 | bidirectional | General purpose I/O that also provides AN0 ADC input, C1IN+ comparator positive input, DAC1OUT output and ICSPDAT programming data I/O. |
| 20 | VSS | power_in | Ground reference. |
Key specifications
| Parameter | Value |
|---|---|
| Manufacturer | Microchip Tech |
| Package | PDIP-20 |
| Category | Single Chip Microcomputer/Microcontroller |
| Pins | 20 |
Electrical characteristics
Limits as printed in the datasheet (page.json metadata.characteristics carries them as data).
| Parameter | Symbol | Min | Typ | Max | Unit | Conditions | Page |
|---|---|---|---|---|---|---|---|
| Ambient temperature under bias | -40 | 125 | °C | 513 | |||
| Storage temperature | -65 | 150 | °C | 513 | |||
| Voltage on VDD pin | VDD | -0.3 | 6.5 | V | With respect to VSS, PIC16F1614/8 | 513 | |
| Voltage on MCLR pin | -0.3 | 9 | V | With respect to VSS | 513 | ||
| Maximum current on VDD pin | 250 | mA | -40°C ≤ TA ≤ +85°C | 513 | |||
| Maximum current on VDD pin | 85 | mA | +85°C ≤ TA ≤ +125°C | 513 | |||
| Sunk by any standard I/O pin | 50 | mA | 513 | ||||
| Sourced by any standard I/O pin | 50 | mA | 513 | ||||
| Sunk by any High Current I/O pin | 100 | mA | 513 | ||||
| Sourced by any High Current I/O pin | 100 | mA | 513 | ||||
| Clamp current | IK | 20 | mA | VPIN < 0 or VPIN > VDD | 513 | ||
| Operating ambient temperature, industrial | TA | -40 | 85 | °C | Industrial Temperature | 514 | |
| Operating ambient temperature, extended | TA | -40 | 125 | °C | Extended Temperature | 514 | |
| Supply Voltage | VDD | 2.3 | 5.5 | V | FOSC ≤ 16 MHz | 516 | |
| Supply Voltage | VDD | 2.5 | 5.5 | V | FOSC ≤ 32 MHz | 516 | |
| RAM Data Retention Voltage | VDR | 1.7 | V | Device in Sleep mode | 516 | ||
| FVR Gain Voltage Accuracy for ADC | VADFVR | -4 | 4 | % | 1x VFVR, VDD ≥ 2.5V; 2x VFVR, VDD ≥ 2.5V | 516 | |
| FVR Gain Voltage Accuracy for ADC | VADFVR | -5 | 5 | % | 1x VFVR, VDD ≥ 2.5V; 2x VFVR, VDD ≥ 2.5V; 4x VFVR, VDD ≥ 4.75V | 516 | |
| FVR Gain Voltage Accuracy for Comparator/DAC | VCDAFVR | -4 | 4 | % | 1x VFVR, VDD ≥ 2.5V; 2x VFVR, VDD ≥ 2.5V | 516 | |
| FVR Gain Voltage Accuracy for Comparator/DAC | VCDAFVR | -7 | 7 | % | 1x VFVR, VDD ≥ 2.5V; 2x VFVR, VDD ≥ 2.5V; 4x VFVR, VDD ≥ 4.75V | 516 | |
| VDD Rise Rate | SVDD | 0.05 | V/ms | Ensures that the Power-on Reset signal is released properly | 516 | ||
| Supply current (FOSC = 16 MHz HFINTOSC) | IDD | 780 | 1500 | µA | VDD = 2.3V | 518 | |
| Supply current (FOSC = 16 MHz HFINTOSC) | IDD | 1000 | 1900 | µA | VDD = 3.0V | 518 | |
| Supply current (FOSC = 16 MHz HFINTOSC) | IDD | 1090 | 2100 | µA | VDD = 5.0V | 518 | |
| Supply current (FOSC = 32 MHz HFINTOSC) | IDD | 1.6 | 5 | mA | VDD = 3.0V | 519 | |
| Supply current (FOSC = 32 MHz HFINTOSC) | IDD | 1.9 | 6 | mA | VDD = 5.0V | 519 | |
| Base power-down current, Low-Power Sleep mode | IPD | 0.3 | 4 | µA | VDD = 3.0V; WDT, BOR, FVR disabled, all peripherals inactive; max at +125°C = 12 µA | 520 | |
| Input Low Voltage, TTL buffer | VIL | 0.8 | V | 4.5V ≤ VDD ≤ 5.5V | 522 | ||
| Input High Voltage, TTL buffer | VIH | 2 | V | 4.5V ≤ VDD ≤ 5.5V | 522 | ||
| Input Leakage Current, I/O ports | IIL | -125 | 5 | 125 | nA | VSS ≤ VPIN ≤ VDD, pin at high-impedance, 85°C | 522 |
| Input Leakage Current, MCLR | IIL | -200 | 50 | 200 | nA | VSS ≤ VPIN ≤ VDD, pin at high-impedance, 85°C | 522 |
| Output Low Voltage, I/O ports | VOL | 0.6 | V | IOL = 8.0 mA, VDD = 5.0V; IOL = 6.0 mA, VDD = 3.3V; IOL = 1.8 mA, VDD = 1.8V | 522 | ||
| All I/O pins capacitance | CIO | 50 | pF | 522 | |||
| Voltage on MCLR/VPP pin for high-voltage programming | VIHH | 8 | 9 | V | (Note 2) | 523 | |
| VDD for Bulk Erase | VBE | 2.7 | V | 523 | |||
| Cell Endurance (program flash) | EP | 10 | K E/W | -40°C ≤ TA ≤ +85°C (Note 1) | 523 | ||
| Self-timed Write Cycle Time | TIW | 2 | 2.5 | ms | 523 | ||
| External CLKIN Frequency (ECH) | FOSC | 32 | MHz | External Clock (ECH) | 526 | ||
| Instruction Cycle Time | TCY | 200 | ns | TCY = 4/FOSC | 526 | ||
| HFINTOSC wake-up from Sleep start-up time | TWARM | 5 | 15 | µs | 527 | ||
| On-chip VCO system frequency | FSYS | 16 | 32 | MHz | 528 | ||
| PLL start-up time (lock time) | TRC | 2 | ms | 528 | |||
| Watchdog Timer time-out period, low-power | TWDTLP | 10 | 16 | 27 | ms | VDD = 3.3V-5V, 1:512 prescaler used | 531 |
| Power-up Timer period | TPWRT | 40 | 65 | 140 | ms | PWRTE = 0 | 531 |
| Brown-out Reset voltage | VBOR | 2.55 | 2.7 | 2.85 | V | BORV = 0 | 531 |
| Brown-out Reset voltage | VBOR | 2.35 | 2.45 | 2.58 | V | BORV = 1 (PIC16F1614/8) | 531 |
| Low-Power Brown-Out Reset voltage | VLPBOR | 1.8 | 2.1 | 2.5 | V | LPBOR = 1 | 531 |
| T0CKI high pulse width | TT0H | 10 | ns | With prescaler | 532 | ||
| T1CKI high time | TT1H | 30 | ns | Asynchronous | 532 | ||
| Delay from external clock edge to Timer1 increment | TCKEZTMR1 | 2 | 7 | TOSC | Timers in Sync mode | 532 | |
| Integral Error | EIL | -1.7 | 1 | 1.7 | LSb | VREF = 3.0V | 533 |
| Offset Error | EOFF | -2.5 | 1 | 2.5 | LSb | VREF = 3.0V | 533 |
| Gain Error | EGN | -2 | 1 | 2 | LSb | VREF = 3.0V | 533 |
| ADC clock period (FOSC-based) | TAD | 1 | 6 | µs | FOSC-based | 534 | |
| Input Offset Voltage | Vioff | -60 | 7.5 | 60 | mV | CxSP = 1, Vicm = VDD/2 | 535 |
| Response Time Rising Edge | Tresp | 400 | 800 | ns | CxSP = 1 | 535 | |
| Maximum Junction Temperature | TJMAX | 150 | °C | 524 | |||
| Thermal Resistance Junction to Ambient, 20-pin DIP | JA | 62.2 | C/W | 20-pin DIP package | 524 | ||
| Thermal Resistance Junction to Case, 20-pin DIP | JC | 27.5 | C/W | 20-pin DIP package | 524 |
CAD (KiCad official)
- Symbol:
PIC16F1618-I - Footprint:
Package_DIP:DIP-20_W7.62mm - 3D model: PDIP-20 (KiCad packages3D, STEP)
- 3D model files:
pic16f1618-i-etched.step/pic16f1618-i-etched.glbcarry the MPN laser-etched on the die in a toggleableAdom.LaserEtchgroup (Fusion-ready);pic16f1618-i.step/pic16f1618-i.glbare the bare package body.
Provenance
Data extracted from the manufacturer datasheet, not a distributor listing:
- Datasheet: Microchip Tech datasheet (585 pp, sha256
70101a4a3c06f10e, retrieved 2026-10-30, tier: manufacturer) - Extractor: parts-factory
2.0.0/extract_pins 0.3, primaryclaude-haiku-5-5(text), consensusclaude-sonnet-5-5(agreed), guards: pin_guards 0.1: passed. Pins are checked against the footprint pad set and their cited datasheet pages before publish. - CAD: KiCad official libraries (CC-BY-SA 4.0).