3D Model
Open in new tab ↗
Loads when you scroll to it. Unloads after 5 minutes in the background.
Symbol & Footprint
Schematic Symbol
Open full view ↗Loads when you scroll to it. Unloads after 5 minutes in the background.
PCB Footprint
Open full view ↗Loads when you scroll to it. Unloads after 5 minutes in the background.
Datasheet
Open in new tab ↗Loads when you scroll to it. Unloads after 5 minutes in the background.
README
markdownWS4612EAA-5
WILLSEMI Will Semicon · Analog Switches, Multiplexers · SOT-23-5L
WS4612EAA-5 from WILLSEMI Will Semicon, in a SOT-23-5L. Pinout and pin descriptions extracted from the manufacturer datasheet (extract_pins, cross-checked by a second model); symbol, footprint, and 3D from KiCad-official CAD.
Pinout
| Pin | Name | Type | Function |
|---|---|---|---|
| 1 | OUT | power_out | Output of the 60mΩ P-MOSFET power switch; the output auto-discharges when the device is disabled, and reverse current flow from OUT to IN is blocked when the device is off. |
| 2 | GND | power_in | Ground reference pin; the input bypass capacitor (1µF ceramic recommended) connects from IN to GND close to the device. |
| 3 | ISET | passive | Current-limit setting pin; the current limit is set by an external resistor from ISET to GND, with RSET=6.8kΩ giving ILIM of 0.86 to 1.14A (1.0A typical) per the datasheet test condition. |
| 4 | EN | input | Enable input for the EAA variant (active high, EN high enables the switch); it must be driven to a clearly defined logic level because floating may cause unpredictable operation, with VIL max 0.4V and VIH min 1.2V at VIN=5V. |
| 5 | IN | power_in | Input pin supplying the switch, specified for 2.5V to 5.5V operation with undervoltage lockout around 2.25V typical. |
Key specifications
| Parameter | Value |
|---|---|
| Manufacturer | WILLSEMI Will Semicon |
| Package | SOT-23-5L |
| Category | Interface |
| Pins | 5 |
Electrical characteristics
Limits as printed in the datasheet (page.json metadata.characteristics carries them as data).
| Parameter | Symbol | Min | Typ | Max | Unit | Conditions | Page |
|---|---|---|---|---|---|---|---|
| Quiescent supply current | IQ | 26 | 50 | μA | IOUT=0, VIN=5V, VEN=enable | 5 | |
| Shutdown current | ISD | 1 | μA | VEN=disable | 5 | ||
| Reverse current | IREV | 1 | μA | VIN=0V, VEN=disable, VOUT=5V, Current flow to VIN | 5 | ||
| Main-FET ON resistance | RON | 60 | 70 | mΩ | VIN=5V, VEN=enable, IOUT=500mA | 5 | |
| Auto-discharge FET ON resistance | RDCHG | 50 | 100 | Ω | VEN=disable, VIN =5V, VOUT=2V | 5 | |
| Current limit | ILIM | 0.86 | 1 | 1.14 | A | RSET=6.8K | 5 |
| Short circuit current limiting response time | tSHORT | 1 | μs | OUT connected to GND, CL=1μF | 5 | ||
| EN input low voltage | VIL | 0.4 | V | VIN=5V | 5 | ||
| EN input high voltage | VIH | 1.2 | V | VIN=5V | 5 | ||
| Under voltage lock out threshold | VUVLO | 2.25 | 2.4 | V | 5 | ||
| Input voltage range (absolute maximum, IN pin) | VIN | -0.3 | 6.5 | V | 4 | ||
| OUT pin voltage range (absolute maximum) | VOUT | -0.3 | 6.5 | V | 4 | ||
| ISET pin voltage range (absolute maximum) | VISET | -0.3 | 6.5 | V | 4 | ||
| FLG pin voltage range (absolute maximum) | VFLG | -0.3 | 6.5 | V | 4 | ||
| EN pin voltage range (absolute maximum) | VEN | -0.3 | 6.5 | V | 4 | ||
| Junction temperature | TJ | -40 | 150 | oC | 4 | ||
| Lead temperature (soldering, 10s) | TL | 260 | oC | Soldering, 10s | 4 | ||
| Storage temperature | Tstg | -55 | 150 | oC | 4 | ||
| ESD HBM | HBM | 2000 | V | 4 | |||
| ESD CDM | CDM | 2000 | V | 4 | |||
| Supply input voltage range | VIN | 2.5 | 5.5 | V | 4 | ||
| Operating ambient temperature | TA | -40 | 85 | oC | 4 | ||
| Thermal resistance junction to ambient | RθJA | 250 | oC/W | Surface mounted on FR-4 Board using 2 oz, 11 square inch Cu area; PCB 1.51.5 square inches | 4 | ||
| Thermal resistance junction to case | RθJC | 58 | oC/W | 4 | |||
| Short-circuit output current | IOS | 0.65 | A | OUT shorted to GND, Rset=6.8K | 5 | ||
| OUT pin turn-on time after EN ON | tON | 700 | μs | CL=1μF, RL=5ohm | 5 | ||
| Fault flag output blanking time | tBLANK | 7.5 | ms | VIN=5.0V | 5 | ||
| Over-temperature shutdown threshold | TSD | 160 | oC | 5 | |||
| Over-temperature threshold hysteresis | THYS | 20 | oC | 5 | |||
| Under voltage lock out hysteresis | VUVLO-HYS | 250 | mV | 5 |
CAD (KiCad official)
- Symbol:
WS4612EAA-5 - Footprint:
Package_TO_SOT_SMD:SOT-23-5 - 3D model: SOT-23-5L (KiCad packages3D, STEP)
- 3D model files:
ws4612eaa-5-etched.step/ws4612eaa-5-etched.glbcarry the MPN laser-etched on the die in a toggleableAdom.LaserEtchgroup (Fusion-ready);ws4612eaa-5.step/ws4612eaa-5.glbare the bare package body.
Provenance
Data extracted from the manufacturer datasheet, not a distributor listing:
- Datasheet: WILLSEMI Will Semicon datasheet (16 pp, sha256
52c9628a5ee841f4, retrieved 2026-10-19, tier: lcsc) - Extractor: parts-factory
2.0.0/extract_pins 0.3, primaryclaude-haiku-5-5(text), consensusclaude-sonnet-5-5(agreed), guards: pin_guards 0.1: passed. Pins are checked against the footprint pad set and their cited datasheet pages before publish. - CAD: KiCad official libraries (CC-BY-SA 4.0).