main
Download ZIP Propose a change
Generated by kicad-footprint-generator · KiCad file format 20260206
Name Last commit message Last updated
docs Publish 0.1.0 · Ray
viewers ws4612eaa-5: viewers · Ray
package.json Publish 0.1.0 · Ray
page.json Set visibility: public · Ray
README.md Publish 0.1.0 · Ray
ws4612eaa-5-etched.glb Publish 0.1.0 · Ray
ws4612eaa-5-etched.step ws4612eaa-5: factory component page (tier=lcsc) · Ray
ws4612eaa-5-hero.glb ws4612eaa-5: hero GLB from the etched model (keeps the MPN mark) · Ray
ws4612eaa-5-hero.overlay.json Publish 0.1.0 · Ray
ws4612eaa-5.glb Publish 0.1.0 · Ray
ws4612eaa-5.kicad_mod Publish 0.1.0 · Ray
ws4612eaa-5.kicad_sym Publish 0.1.0 · Ray
ws4612eaa-5.lbr Publish 0.1.0 · Ray
ws4612eaa-5.step Publish 0.1.0 · Ray

WS4612EAA-5

WILLSEMI Will Semicon · Analog Switches, Multiplexers · SOT-23-5L

WS4612EAA-5 from WILLSEMI Will Semicon, in a SOT-23-5L. Pinout and pin descriptions extracted from the manufacturer datasheet (extract_pins, cross-checked by a second model); symbol, footprint, and 3D from KiCad-official CAD.

Pinout

Pin Name Type Function
1 OUT power_out Output of the 60mΩ P-MOSFET power switch; the output auto-discharges when the device is disabled, and reverse current flow from OUT to IN is blocked when the device is off.
2 GND power_in Ground reference pin; the input bypass capacitor (1µF ceramic recommended) connects from IN to GND close to the device.
3 ISET passive Current-limit setting pin; the current limit is set by an external resistor from ISET to GND, with RSET=6.8kΩ giving ILIM of 0.86 to 1.14A (1.0A typical) per the datasheet test condition.
4 EN input Enable input for the EAA variant (active high, EN high enables the switch); it must be driven to a clearly defined logic level because floating may cause unpredictable operation, with VIL max 0.4V and VIH min 1.2V at VIN=5V.
5 IN power_in Input pin supplying the switch, specified for 2.5V to 5.5V operation with undervoltage lockout around 2.25V typical.

Key specifications

Parameter Value
Manufacturer WILLSEMI Will Semicon
Package SOT-23-5L
Category Interface
Pins 5

Electrical characteristics

Limits as printed in the datasheet (page.json metadata.characteristics carries them as data).

Parameter Symbol Min Typ Max Unit Conditions Page
Quiescent supply current IQ 26 50 μA IOUT=0, VIN=5V, VEN=enable 5
Shutdown current ISD 1 μA VEN=disable 5
Reverse current IREV 1 μA VIN=0V, VEN=disable, VOUT=5V, Current flow to VIN 5
Main-FET ON resistance RON 60 70 mΩ VIN=5V, VEN=enable, IOUT=500mA 5
Auto-discharge FET ON resistance RDCHG 50 100 Ω VEN=disable, VIN =5V, VOUT=2V 5
Current limit ILIM 0.86 1 1.14 A RSET=6.8K 5
Short circuit current limiting response time tSHORT 1 μs OUT connected to GND, CL=1μF 5
EN input low voltage VIL 0.4 V VIN=5V 5
EN input high voltage VIH 1.2 V VIN=5V 5
Under voltage lock out threshold VUVLO 2.25 2.4 V 5
Input voltage range (absolute maximum, IN pin) VIN -0.3 6.5 V 4
OUT pin voltage range (absolute maximum) VOUT -0.3 6.5 V 4
ISET pin voltage range (absolute maximum) VISET -0.3 6.5 V 4
FLG pin voltage range (absolute maximum) VFLG -0.3 6.5 V 4
EN pin voltage range (absolute maximum) VEN -0.3 6.5 V 4
Junction temperature TJ -40 150 oC 4
Lead temperature (soldering, 10s) TL 260 oC Soldering, 10s 4
Storage temperature Tstg -55 150 oC 4
ESD HBM HBM 2000 V 4
ESD CDM CDM 2000 V 4
Supply input voltage range VIN 2.5 5.5 V 4
Operating ambient temperature TA -40 85 oC 4
Thermal resistance junction to ambient RθJA 250 oC/W Surface mounted on FR-4 Board using 2 oz, 11 square inch Cu area; PCB 1.51.5 square inches 4
Thermal resistance junction to case RθJC 58 oC/W 4
Short-circuit output current IOS 0.65 A OUT shorted to GND, Rset=6.8K 5
OUT pin turn-on time after EN ON tON 700 μs CL=1μF, RL=5ohm 5
Fault flag output blanking time tBLANK 7.5 ms VIN=5.0V 5
Over-temperature shutdown threshold TSD 160 oC 5
Over-temperature threshold hysteresis THYS 20 oC 5
Under voltage lock out hysteresis VUVLO-HYS 250 mV 5

CAD (KiCad official)

  • Symbol: WS4612EAA-5
  • Footprint: Package_TO_SOT_SMD:SOT-23-5
  • 3D model: SOT-23-5L (KiCad packages3D, STEP)
  • 3D model files: ws4612eaa-5-etched.step / ws4612eaa-5-etched.glb carry the MPN laser-etched on the die in a toggleable Adom.LaserEtch group (Fusion-ready); ws4612eaa-5.step / ws4612eaa-5.glb are the bare package body.

Provenance

Data extracted from the manufacturer datasheet, not a distributor listing:

  • Datasheet: WILLSEMI Will Semicon datasheet (16 pp, sha256 52c9628a5ee841f4, retrieved 2026-10-19, tier: lcsc)
  • Extractor: parts-factory 2.0.0 / extract_pins 0.3, primary claude-haiku-5-5 (text), consensus claude-sonnet-5-5 (agreed), guards: pin_guards 0.1: passed. Pins are checked against the footprint pad set and their cited datasheet pages before publish.
  • CAD: KiCad official libraries (CC-BY-SA 4.0).

Datasheet PDF