Loads when you scroll to it. Unloads after 5 minutes in the background.

Symbol & Footprint

Schematic Symbol

Open full view ↗
Loads when you scroll to it. Unloads after 5 minutes in the background.

PCB Footprint

Open full view ↗
Loads when you scroll to it. Unloads after 5 minutes in the background.
Loads when you scroll to it. Unloads after 5 minutes in the background.
Download PDF
Contents

README

markdown

TPA6112A2DGQR

Texas Instruments · Audio Amplifiers · MSOP-10-EP

TPA6112A2DGQR from Texas Instruments, in a MSOP-10-EP. Pinout and pin descriptions extracted from the manufacturer datasheet (extract_pins, cross-checked by a second model); symbol, footprint, and 3D from KiCad-official CAD.

Pinout

Pin Name Type Function
1 VO1 output VO1 is the audio output for channel 1.
2 IN1- input IN1- is the negative input for channel 1.
3 IN1+ input IN1+ is the positive input for channel 1.
4 BYPASS passive BYPASS is tapped to the voltage divider for the internal mid-supply bias and should be connected to a 0.1 µF to 1 µF low ESR capacitor for best performance.
5 GND power_in GND is the ground connection.
6 SHUTDOWN input SHUTDOWN puts the device in a low quiescent current mode when held high.
7 IN2+ input IN2+ is the positive input for channel 2.
8 IN2- input IN2- is the negative input for channel 2.
9 VO2 output VO2 is the audio output for channel 2.
10 VDD power_in VDD is the supply voltage terminal, specified for 2.5 V to 5.5 V operation.
11 EP passive Exposed pad (from the footprint; not named in the datasheet pin table).

Key specifications

Parameter Value
Manufacturer Texas Instruments
Package MSOP-10-EP
Category Amplifiers/Comparators
Pins 11

Electrical characteristics

Limits as printed in the datasheet (page.json metadata.characteristics carries them as data).

Parameter Symbol Min Typ Max Unit Conditions Page
Supply voltage VDD 2.5 5.5 V 3
Operating free-air temperature TA -40 85 °C 3
Supply voltage VDD 6 V 2
Input voltage VI -0.3 V 2
Operating junction temperature range TJ -40 150 °C 2
Storage temperature range Tstg -65 150 °C 2
Lead temperature 260 °C 1,6 mm (1/16 inch) from case for 10 seconds 2
Package power rating (DGQ) 2.14 W TA ≤ 25°C 3
Package power rating (DGQ) 1.37 W TA = 70°C 3
Package power rating (DGQ) 1.11 W TA = 85°C 3
Supply current IDD 1.5 3 mA At TA = 25°C, VDD = 2.5 V; SHUTDOWN = 0 V 3
Supply current in SHUTDOWN mode IDD(SD) 10 50 µA At TA = 25°C, VDD = 2.5 V; SHUTDOWN = VDD 3
Supply current in SHUTDOWN mode IDD(SD) 60 100 µA At TA = 25°C, VDD = 5.5 V; SHUTDOWN = VDD 3
Input impedance Zi 1 MΩ At TA = 25°C, VDD = 2.5 V 3
Output offset voltage VOO 15 mV At TA = 25°C, VDD = 2.5 V; AV = 2 V/V 3
Power supply rejection ratio PSRR 83 dB At TA = 25°C, VDD = 2.5 V; VDD = 3.2 V to 3.4 V 3
Power supply rejection ratio PSRR 76 dB At TA = 25°C, VDD = 5.5 V; VDD = 4.9 V to 5.1 V 3
High-level input current (SHUTDOWN) /IIH/ 1 µA At TA = 25°C, VDD = 5.5 V; VDD = 5.5 V, VI = VDD 3
Low-level input current (SHUTDOWN) /IIL/ 1 µA At TA = 25°C, VDD = 5.5 V; VDD = 5.5 V, VI = 0 V 3
Output power (each channel) PO 60 mW VDD = 3.3 V, TA = 25°C, RL = 16 Ω; THD≤0.1%, f = 1 kHz 3
Total harmonic distortion + noise THD+N 0.4 % VDD = 3.3 V, TA = 25°C, RL = 16 Ω; PO = 40 mW, 20 - 20 kHz 3
Phase margin 96 ° VDD = 3.3 V, TA = 25°C, RL = 16 Ω; Open loop 3
Supply ripple rejection ratio 71 dB VDD = 3.3 V, TA = 25°C, RL = 16 Ω; f = 1 kHz 3
Channel/channel output separation 89 dB VDD = 3.3 V, TA = 25°C, RL = 16 Ω; f = 1 kHz 3
Signal-to-noise ratio SNR 100 dB VDD = 3.3 V, TA = 25°C, RL = 16 Ω; PO = 50 mW, AV = 1 3
Noise output voltage Vn 11 µV(rms) VDD = 3.3 V, TA = 25°C, RL = 16 Ω; AV = 1 3
Output power (each channel) PO 150 mW VDD = 5 V, TA = 25°C, RL = 16 Ω; THD≤0.1%, f = 1 kHz 4
Total harmonic distortion + noise THD+N 0.6 % VDD = 5 V, TA = 25°C, RL = 16 Ω; PO = 100 mW, 20 - 20 kHz 4
Phase margin 96 ° VDD = 5 V, TA = 25°C, RL = 16 Ω; Open loop 4
Supply ripple rejection ratio 61 dB VDD = 5 V, TA = 25°C, RL = 16 Ω; f = 1 kHz 4
Channel/channel output separation 90 dB VDD = 5 V, TA = 25°C, RL = 16 Ω; f = 1 kHz 4
Signal-to-noise ratio SNR 100 dB VDD = 5 V, TA = 25°C, RL = 16 Ω; PO = 100 mW, AV = 1 4
Noise output voltage Vn 11.7 µV(rms) VDD = 5 V, TA = 25°C, RL = 16 Ω; AV = 1 4
Output power (each channel) PO 40 mW VDD = 3.3 V, TA = 25°C, RL = 32 Ω; THD≤0.1%, f = 1 kHz 4
Total harmonic distortion + noise THD+N 0.4 % VDD = 3.3 V, TA = 25°C, RL = 32 Ω; PO = 30 mW, 20 - 20 kHz 4
Supply ripple rejection ratio 71 dB VDD = 3.3 V, TA = 25°C, RL = 32 Ω; f = 1 kHz 4
Channel/channel output separation 95 dB VDD = 3.3 V, TA = 25°C, RL = 32 Ω; f = 1 kHz 4
Noise output voltage Vn 11 µV(rms) VDD = 3.3 V, TA = 25°C, RL = 32 Ω; AV = 1 4
Output power (each channel) PO 90 mW VDD = 5 V, TA = 25°C, RL = 32 Ω; THD≤0.1%, f = 1 kHz 4
Phase margin 97 ° VDD = 5 V, TA = 25°C, RL = 32 Ω; Open loop 4
Channel/channel output separation 98 dB VDD = 5 V, TA = 25°C, RL = 32 Ω; f = 1 kHz 4
Power dissipation derating factor (DGQ) 17.1 mW/°C Above TA = 25°C 3

CAD (KiCad official)

  • Symbol: TPA6112A2DGQR
  • Footprint: Package_SO:MSOP-10-1EP_3x3mm_P0.5mm_EP1.68x1.88mm
  • 3D model: MSOP-10-EP (KiCad packages3D, STEP)
  • 3D model files: tpa6112a2dgqr-etched.step / tpa6112a2dgqr-etched.glb carry the MPN laser-etched on the die in a toggleable Adom.LaserEtch group (Fusion-ready); tpa6112a2dgqr.step / tpa6112a2dgqr.glb are the bare package body.

Provenance

Data extracted from the manufacturer datasheet, not a distributor listing:

  • Datasheet: Texas Instruments datasheet (24 pp, sha256 2cb577452a930a1d, retrieved 2026-11-10, tier: manufacturer)
  • Extractor: parts-factory 2.0.0 / extract_pins 0.3, primary claude-haiku-5-5 (text), consensus claude-sonnet-5-5 (agreed), guards: pin_guards 0.1: passed. Pins are checked against the footprint pad set and their cited datasheet pages before publish.
  • CAD: KiCad official libraries (CC-BY-SA 4.0).

Datasheet PDF