Generated by kicad-footprint-generator · KiCad file format 20260206
TPA6112A2DGQR
Texas Instruments · Audio Amplifiers · MSOP-10-EP
TPA6112A2DGQR from Texas Instruments, in a MSOP-10-EP. Pinout and pin descriptions extracted from the manufacturer datasheet (extract_pins, cross-checked by a second model); symbol, footprint, and 3D from KiCad-official CAD.
Pinout
| Pin | Name | Type | Function |
|---|---|---|---|
| 1 | VO1 | output | VO1 is the audio output for channel 1. |
| 2 | IN1- | input | IN1- is the negative input for channel 1. |
| 3 | IN1+ | input | IN1+ is the positive input for channel 1. |
| 4 | BYPASS | passive | BYPASS is tapped to the voltage divider for the internal mid-supply bias and should be connected to a 0.1 µF to 1 µF low ESR capacitor for best performance. |
| 5 | GND | power_in | GND is the ground connection. |
| 6 | SHUTDOWN | input | SHUTDOWN puts the device in a low quiescent current mode when held high. |
| 7 | IN2+ | input | IN2+ is the positive input for channel 2. |
| 8 | IN2- | input | IN2- is the negative input for channel 2. |
| 9 | VO2 | output | VO2 is the audio output for channel 2. |
| 10 | VDD | power_in | VDD is the supply voltage terminal, specified for 2.5 V to 5.5 V operation. |
| 11 | EP | passive | Exposed pad (from the footprint; not named in the datasheet pin table). |
Key specifications
| Parameter | Value |
|---|---|
| Manufacturer | Texas Instruments |
| Package | MSOP-10-EP |
| Category | Amplifiers/Comparators |
| Pins | 11 |
Electrical characteristics
Limits as printed in the datasheet (page.json metadata.characteristics carries them as data).
| Parameter | Symbol | Min | Typ | Max | Unit | Conditions | Page |
|---|---|---|---|---|---|---|---|
| Supply voltage | VDD | 2.5 | 5.5 | V | 3 | ||
| Operating free-air temperature | TA | -40 | 85 | °C | 3 | ||
| Supply voltage | VDD | 6 | V | 2 | |||
| Input voltage | VI | -0.3 | V | 2 | |||
| Operating junction temperature range | TJ | -40 | 150 | °C | 2 | ||
| Storage temperature range | Tstg | -65 | 150 | °C | 2 | ||
| Lead temperature | 260 | °C | 1,6 mm (1/16 inch) from case for 10 seconds | 2 | |||
| Package power rating (DGQ) | 2.14 | W | TA ≤ 25°C | 3 | |||
| Package power rating (DGQ) | 1.37 | W | TA = 70°C | 3 | |||
| Package power rating (DGQ) | 1.11 | W | TA = 85°C | 3 | |||
| Supply current | IDD | 1.5 | 3 | mA | At TA = 25°C, VDD = 2.5 V; SHUTDOWN = 0 V | 3 | |
| Supply current in SHUTDOWN mode | IDD(SD) | 10 | 50 | µA | At TA = 25°C, VDD = 2.5 V; SHUTDOWN = VDD | 3 | |
| Supply current in SHUTDOWN mode | IDD(SD) | 60 | 100 | µA | At TA = 25°C, VDD = 5.5 V; SHUTDOWN = VDD | 3 | |
| Input impedance | Zi | 1 | MΩ | At TA = 25°C, VDD = 2.5 V | 3 | ||
| Output offset voltage | VOO | 15 | mV | At TA = 25°C, VDD = 2.5 V; AV = 2 V/V | 3 | ||
| Power supply rejection ratio | PSRR | 83 | dB | At TA = 25°C, VDD = 2.5 V; VDD = 3.2 V to 3.4 V | 3 | ||
| Power supply rejection ratio | PSRR | 76 | dB | At TA = 25°C, VDD = 5.5 V; VDD = 4.9 V to 5.1 V | 3 | ||
| High-level input current (SHUTDOWN) | /IIH/ | 1 | µA | At TA = 25°C, VDD = 5.5 V; VDD = 5.5 V, VI = VDD | 3 | ||
| Low-level input current (SHUTDOWN) | /IIL/ | 1 | µA | At TA = 25°C, VDD = 5.5 V; VDD = 5.5 V, VI = 0 V | 3 | ||
| Output power (each channel) | PO | 60 | mW | VDD = 3.3 V, TA = 25°C, RL = 16 Ω; THD≤0.1%, f = 1 kHz | 3 | ||
| Total harmonic distortion + noise | THD+N | 0.4 | % | VDD = 3.3 V, TA = 25°C, RL = 16 Ω; PO = 40 mW, 20 - 20 kHz | 3 | ||
| Phase margin | 96 | ° | VDD = 3.3 V, TA = 25°C, RL = 16 Ω; Open loop | 3 | |||
| Supply ripple rejection ratio | 71 | dB | VDD = 3.3 V, TA = 25°C, RL = 16 Ω; f = 1 kHz | 3 | |||
| Channel/channel output separation | 89 | dB | VDD = 3.3 V, TA = 25°C, RL = 16 Ω; f = 1 kHz | 3 | |||
| Signal-to-noise ratio | SNR | 100 | dB | VDD = 3.3 V, TA = 25°C, RL = 16 Ω; PO = 50 mW, AV = 1 | 3 | ||
| Noise output voltage | Vn | 11 | µV(rms) | VDD = 3.3 V, TA = 25°C, RL = 16 Ω; AV = 1 | 3 | ||
| Output power (each channel) | PO | 150 | mW | VDD = 5 V, TA = 25°C, RL = 16 Ω; THD≤0.1%, f = 1 kHz | 4 | ||
| Total harmonic distortion + noise | THD+N | 0.6 | % | VDD = 5 V, TA = 25°C, RL = 16 Ω; PO = 100 mW, 20 - 20 kHz | 4 | ||
| Phase margin | 96 | ° | VDD = 5 V, TA = 25°C, RL = 16 Ω; Open loop | 4 | |||
| Supply ripple rejection ratio | 61 | dB | VDD = 5 V, TA = 25°C, RL = 16 Ω; f = 1 kHz | 4 | |||
| Channel/channel output separation | 90 | dB | VDD = 5 V, TA = 25°C, RL = 16 Ω; f = 1 kHz | 4 | |||
| Signal-to-noise ratio | SNR | 100 | dB | VDD = 5 V, TA = 25°C, RL = 16 Ω; PO = 100 mW, AV = 1 | 4 | ||
| Noise output voltage | Vn | 11.7 | µV(rms) | VDD = 5 V, TA = 25°C, RL = 16 Ω; AV = 1 | 4 | ||
| Output power (each channel) | PO | 40 | mW | VDD = 3.3 V, TA = 25°C, RL = 32 Ω; THD≤0.1%, f = 1 kHz | 4 | ||
| Total harmonic distortion + noise | THD+N | 0.4 | % | VDD = 3.3 V, TA = 25°C, RL = 32 Ω; PO = 30 mW, 20 - 20 kHz | 4 | ||
| Supply ripple rejection ratio | 71 | dB | VDD = 3.3 V, TA = 25°C, RL = 32 Ω; f = 1 kHz | 4 | |||
| Channel/channel output separation | 95 | dB | VDD = 3.3 V, TA = 25°C, RL = 32 Ω; f = 1 kHz | 4 | |||
| Noise output voltage | Vn | 11 | µV(rms) | VDD = 3.3 V, TA = 25°C, RL = 32 Ω; AV = 1 | 4 | ||
| Output power (each channel) | PO | 90 | mW | VDD = 5 V, TA = 25°C, RL = 32 Ω; THD≤0.1%, f = 1 kHz | 4 | ||
| Phase margin | 97 | ° | VDD = 5 V, TA = 25°C, RL = 32 Ω; Open loop | 4 | |||
| Channel/channel output separation | 98 | dB | VDD = 5 V, TA = 25°C, RL = 32 Ω; f = 1 kHz | 4 | |||
| Power dissipation derating factor (DGQ) | 17.1 | mW/°C | Above TA = 25°C | 3 |
CAD (KiCad official)
- Symbol:
TPA6112A2DGQR - Footprint:
Package_SO:MSOP-10-1EP_3x3mm_P0.5mm_EP1.68x1.88mm - 3D model: MSOP-10-EP (KiCad packages3D, STEP)
- 3D model files:
tpa6112a2dgqr-etched.step/tpa6112a2dgqr-etched.glbcarry the MPN laser-etched on the die in a toggleableAdom.LaserEtchgroup (Fusion-ready);tpa6112a2dgqr.step/tpa6112a2dgqr.glbare the bare package body.
Provenance
Data extracted from the manufacturer datasheet, not a distributor listing:
- Datasheet: Texas Instruments datasheet (24 pp, sha256
2cb577452a930a1d, retrieved 2026-11-10, tier: manufacturer) - Extractor: parts-factory
2.0.0/extract_pins 0.3, primaryclaude-haiku-5-5(text), consensusclaude-sonnet-5-5(agreed), guards: pin_guards 0.1: passed. Pins are checked against the footprint pad set and their cited datasheet pages before publish. - CAD: KiCad official libraries (CC-BY-SA 4.0).