3D Model
Open in new tab ↗
Loads when you scroll to it. Unloads after 5 minutes in the background.
Symbol & Footprint
Schematic Symbol
Open full view ↗Loads when you scroll to it. Unloads after 5 minutes in the background.
PCB Footprint
Open full view ↗Loads when you scroll to it. Unloads after 5 minutes in the background.
Datasheet
Open in new tab ↗Loads when you scroll to it. Unloads after 5 minutes in the background.
Contents
README
markdownLMUN5111T1G
LRC · Digital Transistors · SC-70
LMUN5111T1G from LRC, in a SC-70. Pinout and pin descriptions extracted from the manufacturer datasheet (extract_pins, cross-checked by a second model). Symbol and footprint from KiCad-official CAD; the 3D model is generated from the datasheet's package dimensions.
Pinout
| Pin | Name | Type | Function |
|---|---|---|---|
| 1 | BASE | input | Base terminal of the PNP bias resistor transistor, connected to the internal input resistor R1, which is specified at 47 kΩ typical (32.9 kΩ min, 61.1 kΩ max). |
| 2 | EMITTER | passive | Emitter terminal of the PNP transistor, with the emitter-base cutoff test specified at VEB = -6.0 V. |
| 3 | COLLECTOR | passive | Collector terminal of the PNP transistor, rated for a collector-emitter voltage of -50 Vdc (VCEO) and continuous collector current of -100 mAdc (IC). |
Key specifications
| Parameter | Value |
|---|---|
| Manufacturer | LRC |
| Package | SC-70 |
| Category | Transistors/Thyristors |
| Pins | 3 |
Electrical characteristics
Limits as printed in the datasheet (page.json metadata.characteristics carries them as data).
| Parameter | Symbol | Min | Typ | Max | Unit | Conditions | Page |
|---|---|---|---|---|---|---|---|
| Collector-Emitter Breakdown Voltage | VBR(CEO) | -50 | V | IC = -2.0 mAdc, IB = 0 | 2 | ||
| Collector-Base Breakdown Voltage | VBR(CBO) | -50 | V | IC = -10 μAdc, IE = 0 | 2 | ||
| Collector-Base Cutoff Current | ICBO | -100 | nA | VCB = -50 V, IE = 0 | 2 | ||
| Collector-Emitter Cutoff Current | ICEO | -500 | nA | VCE = -50 V, IB = 0 | 2 | ||
| Emitter-Base Cutoff Current | IEBO | -0.5 | mA | VEB = -6.0 V, IC = 0 | 2 | ||
| DC Current Gain | HFE | 35 | 60 | 250 | IC = -5.0 mAdc, VCE = -10 Vdc | 2 | |
| Collector-Emitter Saturation Voltage | VCE(sat) | -0.25 | V | IC = -10 mAdc, IB = -0.3 mAdc | 2 | ||
| Output Voltage (on) | VOL | -0.2 | V | VCC = -5.0 V, VB = -2.5 V, RL = 1.0 KΩ | 2 | ||
| Output Voltage (on) | VOH | -4.9 | V | VCC = -5.0 V, VB = -0.5 V, RL = 1.0 KΩ | 2 | ||
| Input Resistor | R1 | 32.9 | 47 | 61.1 | KΩ | 2 | |
| Resistor Ratio | R1/R2 | 0.8 | 1 | 1.2 | 2 | ||
| Collector-Base Voltage | VCBO | -50 | Vdc | 1 | |||
| Collector-Emitter Voltage | VCEO | -50 | Vdc | 1 | |||
| Collector Current, Continuous | IC | -100 | mAdc | 1 | |||
| Junction and Storage Temperature | TJ,Tstg | -55 | 150 | ºC | 1 | ||
| Total Device Dissipation, FR−5 Board | PD | 202 | mW | FR−5 Board (Note 1) @ TA = 25ºC; Note 1: FR-5 @ Minimum Pad | 1 | ||
| Derate above 25ºC | 1.6 | mW/ºC | Above TA = 25ºC | 1 | |||
| Thermal Resistance, Junction-to-Ambient | RΘJA | 618 | ºC/W | Note 1: FR-5 @ Minimum Pad | 1 |
CAD (land: KiCad; 3D: generated from the datasheet)
- Symbol:
LMUN5111T1G - Footprint:
Package_TO_SOT_SMD:SOT-323_SC-70 - 3D model: SC-70, generated on the KiCad land (body 1.3 x 2.05 mm, terminals on the pads, 0.95 mm tall, datasheet A, nominal). KiCad's stock model for this land is taller than the datasheet allows, so the model is generated from the datasheet drawing; the dimensions come from the datasheet drawing where it was read and are defaults otherwise (see provenance.model_3d_generated), not the manufacturer's CAD (STEP)
- 3D model files:
lmun5111t1g-etched.step/lmun5111t1g-etched.glbcarry the MPN laser-etched on the die in a toggleableAdom.LaserEtchgroup (Fusion-ready);lmun5111t1g.step/lmun5111t1g.glbare the bare package body.
Provenance
Data extracted from the manufacturer datasheet, not a distributor listing:
- Datasheet: LRC datasheet (5 pp, sha256
fd1ed095c6966dce, retrieved 2026-11-13, tier: lcsc) - Extractor: parts-factory
2.0.0/extract_pins 0.3, primaryclaude-haiku-5-5(text), consensusclaude-sonnet-5-5(agreed), guards: pin_guards 0.1: passed. Pins are checked against the footprint pad set and their cited datasheet pages before publish. - CAD: land: KiCad official libraries (CC-BY-SA 4.0); 3D: generated from the datasheet's package dimensions (provenance.model_3d_generated).