Loads when you scroll to it. Unloads after 5 minutes in the background.

Symbol & Footprint

Schematic Symbol

Open full view ↗
Loads when you scroll to it. Unloads after 5 minutes in the background.

PCB Footprint

Open full view ↗
Loads when you scroll to it. Unloads after 5 minutes in the background.
Loads when you scroll to it. Unloads after 5 minutes in the background.
Download PDF
Contents

README

markdown

LMUN5111T1G

LRC · Digital Transistors · SC-70

LMUN5111T1G from LRC, in a SC-70. Pinout and pin descriptions extracted from the manufacturer datasheet (extract_pins, cross-checked by a second model). Symbol and footprint from KiCad-official CAD; the 3D model is generated from the datasheet's package dimensions.

Pinout

Pin Name Type Function
1 BASE input Base terminal of the PNP bias resistor transistor, connected to the internal input resistor R1, which is specified at 47 kΩ typical (32.9 kΩ min, 61.1 kΩ max).
2 EMITTER passive Emitter terminal of the PNP transistor, with the emitter-base cutoff test specified at VEB = -6.0 V.
3 COLLECTOR passive Collector terminal of the PNP transistor, rated for a collector-emitter voltage of -50 Vdc (VCEO) and continuous collector current of -100 mAdc (IC).

Key specifications

Parameter Value
Manufacturer LRC
Package SC-70
Category Transistors/Thyristors
Pins 3

Electrical characteristics

Limits as printed in the datasheet (page.json metadata.characteristics carries them as data).

Parameter Symbol Min Typ Max Unit Conditions Page
Collector-Emitter Breakdown Voltage VBR(CEO) -50 V IC = -2.0 mAdc, IB = 0 2
Collector-Base Breakdown Voltage VBR(CBO) -50 V IC = -10 μAdc, IE = 0 2
Collector-Base Cutoff Current ICBO -100 nA VCB = -50 V, IE = 0 2
Collector-Emitter Cutoff Current ICEO -500 nA VCE = -50 V, IB = 0 2
Emitter-Base Cutoff Current IEBO -0.5 mA VEB = -6.0 V, IC = 0 2
DC Current Gain HFE 35 60 250 IC = -5.0 mAdc, VCE = -10 Vdc 2
Collector-Emitter Saturation Voltage VCE(sat) -0.25 V IC = -10 mAdc, IB = -0.3 mAdc 2
Output Voltage (on) VOL -0.2 V VCC = -5.0 V, VB = -2.5 V, RL = 1.0 KΩ 2
Output Voltage (on) VOH -4.9 V VCC = -5.0 V, VB = -0.5 V, RL = 1.0 KΩ 2
Input Resistor R1 32.9 47 61.1 KΩ 2
Resistor Ratio R1/R2 0.8 1 1.2 2
Collector-Base Voltage VCBO -50 Vdc 1
Collector-Emitter Voltage VCEO -50 Vdc 1
Collector Current, Continuous IC -100 mAdc 1
Junction and Storage Temperature TJ,Tstg -55 150 ºC 1
Total Device Dissipation, FR−5 Board PD 202 mW FR−5 Board (Note 1) @ TA = 25ºC; Note 1: FR-5 @ Minimum Pad 1
Derate above 25ºC 1.6 mW/ºC Above TA = 25ºC 1
Thermal Resistance, Junction-to-Ambient RΘJA 618 ºC/W Note 1: FR-5 @ Minimum Pad 1

CAD (land: KiCad; 3D: generated from the datasheet)

  • Symbol: LMUN5111T1G
  • Footprint: Package_TO_SOT_SMD:SOT-323_SC-70
  • 3D model: SC-70, generated on the KiCad land (body 1.3 x 2.05 mm, terminals on the pads, 0.95 mm tall, datasheet A, nominal). KiCad's stock model for this land is taller than the datasheet allows, so the model is generated from the datasheet drawing; the dimensions come from the datasheet drawing where it was read and are defaults otherwise (see provenance.model_3d_generated), not the manufacturer's CAD (STEP)
  • 3D model files: lmun5111t1g-etched.step / lmun5111t1g-etched.glb carry the MPN laser-etched on the die in a toggleable Adom.LaserEtch group (Fusion-ready); lmun5111t1g.step / lmun5111t1g.glb are the bare package body.

Provenance

Data extracted from the manufacturer datasheet, not a distributor listing:

  • Datasheet: LRC datasheet (5 pp, sha256 fd1ed095c6966dce, retrieved 2026-11-13, tier: lcsc)
  • Extractor: parts-factory 2.0.0 / extract_pins 0.3, primary claude-haiku-5-5 (text), consensus claude-sonnet-5-5 (agreed), guards: pin_guards 0.1: passed. Pins are checked against the footprint pad set and their cited datasheet pages before publish.
  • CAD: land: KiCad official libraries (CC-BY-SA 4.0); 3D: generated from the datasheet's package dimensions (provenance.model_3d_generated).

Datasheet PDF