Loads when you scroll to it. Unloads after 5 minutes in the background.

Symbol & Footprint

Schematic Symbol

Open full view ↗
Loads when you scroll to it. Unloads after 5 minutes in the background.

PCB Footprint

Open full view ↗
Loads when you scroll to it. Unloads after 5 minutes in the background.
Loads when you scroll to it. Unloads after 5 minutes in the background.
Download PDF
Contents

README

markdown

STC89C516RD+40I-LQFP44

STC Micro · Microcontroller Units (MCUs/MPUs/SOCs) · LQFP-44(10x10)

STC89C516RD+40I-LQFP44 from STC Micro, in a LQFP-44(10x10). Pinout and pin descriptions extracted from the manufacturer datasheet (extract_pins, cross-checked by a second model). Symbol, footprint, and 3D from KiCad-official CAD.

Pinout

Pin Name Type Function
1 P1.5 bidirectional Standard quasi-bidirectional I/O port 1 bit P1.5 with weak pull-up after reset.
2 P1.6 bidirectional Standard quasi-bidirectional I/O port 1 bit P1.6 with weak pull-up after reset.
3 P1.7 bidirectional Standard quasi-bidirectional I/O port 1 bit P1.7 with weak pull-up after reset.
4 RST input Reset input; the pin must be held high for at least 24 clock cycles plus 10 us to reset the MCU, and HD versions have an internal 45K-100K pull-down.
5 P3.0 bidirectional Standard I/O port 3 bit P3.0 that also serves as RxD, the serial port 1 receive data input.
6 P4.3 bidirectional Standard I/O port 4 bit P4.3 that also serves as INT2, external interrupt 2 with falling-edge or low-level trigger (the datasheet table prints 'INT3' for this pin, see review).
7 P3.1 bidirectional Standard I/O port 3 bit P3.1 that also serves as TxD, the serial port 1 transmit data output.
8 P3.2 bidirectional Standard I/O port 3 bit P3.2 that also serves as INT0, external interrupt 0 with falling-edge or low-level trigger.
9 P3.3 bidirectional Standard I/O port 3 bit P3.3 that also serves as INT1, external interrupt 1 with falling-edge or low-level trigger.
10 P3.4 bidirectional Standard I/O port 3 bit P3.4 that also serves as T0, the external input of Timer/Counter 0.
11 P3.5 bidirectional Standard I/O port 3 bit P3.5 that also serves as T1, the external input of Timer/Counter 1.
12 P3.6 bidirectional Standard I/O port 3 bit P3.6 that also serves as WR, the external data memory write strobe.
13 P3.7 bidirectional Standard I/O port 3 bit P3.7 that also serves as RD, the external data memory read strobe.
14 XTAL2 output Output of the internal inverting oscillator amplifier connected to the other crystal terminal; it can be left floating when an external clock drives XTAL1.
15 XTAL1 input Input to the internal oscillator inverting amplifier, or the external clock input when an external clock source is used.
16 Gnd power_in Ground (power supply negative) for the device.
17 P4.0 bidirectional Standard I/O port 4 bit PORT4[0] with weak pull-up after reset.
18 P2.0 bidirectional Port 2 bit with internal pull-up, usable as standard I/O or as high-order address bus line A8.
19 P2.1 bidirectional Port 2 bit with internal pull-up, usable as standard I/O or as high-order address bus line A9.
20 P2.2 bidirectional Port 2 bit with internal pull-up, usable as standard I/O or as high-order address bus line A10.
21 P2.3 bidirectional Port 2 bit with internal pull-up, usable as standard I/O or as high-order address bus line A11.
22 P2.4 bidirectional Port 2 bit with internal pull-up, usable as standard I/O or as high-order address bus line A12.
23 P2.5 bidirectional Port 2 bit with internal pull-up, usable as standard I/O or as high-order address bus line A13.
24 P2.6 bidirectional Port 2 bit with internal pull-up, usable as standard I/O or as high-order address bus line A14.
25 P2.7 bidirectional Port 2 bit with internal pull-up, usable as standard I/O or as high-order address bus line A15.
26 P4.4 bidirectional Standard I/O port 4 bit P4.4 that on HD versions is replaced by PSEN, the external program memory read strobe output.
27 P4.5 bidirectional Standard I/O port 4 bit P4.5 that on HD versions is replaced by ALE, the address latch enable output (90C versions default to ALE and need AiCube-ISP setting to use as P4.5).
28 P4.1 bidirectional Standard I/O port 4 bit PORT4[1] with weak pull-up after reset.
29 P4.6 bidirectional Standard I/O port 4 bit P4.6 that on HD versions is replaced by EA; EA high or floating selects internal program memory and EA low selects external program memory from address 0000H.
30 P0.7 bidirectional Port 0 bit, open-drain after power-on: as I/O it needs a 10K-4.7K external pull-up, and as multiplexed address/data bus line AD7 it needs no pull-up.
31 P0.6 bidirectional Port 0 bit, open-drain after power-on: as I/O it needs a 10K-4.7K external pull-up, and as multiplexed address/data bus line AD6 it needs no pull-up.
32 P0.5 bidirectional Port 0 bit, open-drain after power-on: as I/O it needs a 10K-4.7K external pull-up, and as multiplexed address/data bus line AD5 it needs no pull-up.
33 P0.4 bidirectional Port 0 bit, open-drain after power-on: as I/O it needs a 10K-4.7K external pull-up, and as multiplexed address/data bus line AD4 it needs no pull-up.
34 P0.3 bidirectional Port 0 bit, open-drain after power-on: as I/O it needs a 10K-4.7K external pull-up, and as multiplexed address/data bus line AD3 it needs no pull-up.
35 P0.2 bidirectional Port 0 bit, open-drain after power-on: as I/O it needs a 10K-4.7K external pull-up, and as multiplexed address/data bus line AD2 it needs no pull-up.
36 P0.1 bidirectional Port 0 bit, open-drain after power-on: as I/O it needs a 10K-4.7K external pull-up, and as multiplexed address/data bus line AD1 it needs no pull-up.
37 P0.0 bidirectional Port 0 bit, open-drain after power-on: as I/O it needs a 10K-4.7K external pull-up, and as multiplexed address/data bus line AD0 it needs no pull-up.
38 VCC power_in Positive power supply; for the 5V C-grade part the datasheet selection table lists 5.5V-3.3V operation.
39 P4.2 bidirectional Standard I/O port 4 bit PORT4[2] that also serves as INT3, external interrupt 3 with falling-edge or low-level trigger.
40 P1.0 bidirectional Standard I/O port 1 bit PORT1[0] that also serves as T2, the external input of Timer/Counter 2.
41 P1.1 bidirectional Standard I/O port 1 bit PORT1[1] that also serves as T2EX, the Timer 2 capture/reload trigger input.
42 P1.2 bidirectional Standard I/O port 1 bit PORT1[2] with weak pull-up after reset.
43 P1.3 bidirectional Standard I/O port 1 bit PORT1[3] with weak pull-up after reset.
44 P1.4 bidirectional Standard I/O port 1 bit PORT1[4] with weak pull-up after reset.

Key specifications

Parameter Value
Manufacturer STC Micro
Package LQFP-44(10x10)
Category Embedded Processors & Controllers
Pins 44

Electrical characteristics

Limits as printed in the datasheet (page.json metadata.characteristics carries them as data).

Parameter Symbol Min Typ Max Unit Conditions Page
VDD Operating Voltage VDD 3.8 5 5.5 V 1658
Operating Current ICC 4 20 mA 5V 1658
Input Low (P0,P1,P2,P3,P4) VIL1 0.8 V 5V 1658
Input Low voltage (RESET, XTAL1) VIL2 1.5 V 5V 1658
Input High (P0,P1,P2,P3,P4,/EA) VIH1 2 V 5V 1658
Input High (RESET) VIH2 3 V 5V 1658
Sinking Current for output low (P1,P2,P3,P4) IOL1 4 6 mA 5V 1658
Sinking Current for output low (P0,ALE,PSEN) IOL2 8 12 mA 5V 1658
Sourcing Current for output high (P1,P2,P3,P4) IOH1 150 220 uA 5V 1658
Sourcing Current for output high (ALE,PSEN) IOH2 14 20 mA 5V 1658
Logic 0 input current (P1,P2,P3,P4) IIL 18 50 uA Vpin=0V, 5V 1658
Logic 1 to 0 transition current (P1,P2,P3,P4) ITL 270 600 uA Vpin=2.0V, 5V 1658
Storage temperature TST -55 125 ℃ 1658
Operating temperature (I) TA -40 85 ℃ 1658
DC power supply (5V) VDD - VSS -0.3 6 V 1658
Voltage on any pin -0.5 5.5 V 1658

Materials and finish

As the datasheet states them (page.json metadata.appearance; the 3D model's colours follow it).

Part Material Colour / plating Datasheet says Page
housing PC Accumulator contents and the contents of a sixteen-bit base register, which may be either the Data Pointer or the PC. In the latter case, the PC is incremented to the address of the following 320

CAD (KiCad official)

  • Symbol: STC89C516RD+40I-LQFP44
  • Footprint: Package_QFP:LQFP-44_10x10mm_P0.8mm
  • 3D model: LQFP-44(10x10) (KiCad packages3D, STEP)
  • 3D model files: stc89c516rd-40i-lqfp44-etched.step / stc89c516rd-40i-lqfp44-etched.glb carry the MPN laser-etched on the die in a toggleable Adom.LaserEtch group (Fusion-ready); stc89c516rd-40i-lqfp44.step / stc89c516rd-40i-lqfp44.glb are the bare package body.

Provenance

Data extracted from the manufacturer datasheet, not a distributor listing:

  • Datasheet: STC Micro datasheet (1691 pp, sha256 fac7be430b93e2dd, retrieved 2026-11-13, tier: lcsc)
  • Datasheet language: Chinese. Pin names, descriptions, and specs on this page were extracted and translated to English by ds2sf; the linked PDF is the manufacturer original.
  • Extractor: parts-factory 2.0.0 / extract_pins 0.3, primary claude-haiku-5-5 (text), consensus claude-sonnet-5-5 (agreed), guards: pin_guards 0.1: passed. Pins are checked against the footprint pad set and their cited datasheet pages before publish.
  • CAD: KiCad official libraries (CC-BY-SA 4.0).

Datasheet PDF