3D Model
Open in new tab ↗
Loads when you scroll to it. Unloads after 5 minutes in the background.
Symbol & Footprint
Schematic Symbol
Open full view ↗Loads when you scroll to it. Unloads after 5 minutes in the background.
PCB Footprint
Open full view ↗Loads when you scroll to it. Unloads after 5 minutes in the background.
Datasheet
Open in new tab ↗Loads when you scroll to it. Unloads after 5 minutes in the background.
Contents
README
markdownSTC89C516RD+40I-LQFP44
STC Micro · Microcontroller Units (MCUs/MPUs/SOCs) · LQFP-44(10x10)
STC89C516RD+40I-LQFP44 from STC Micro, in a LQFP-44(10x10). Pinout and pin descriptions extracted from the manufacturer datasheet (extract_pins, cross-checked by a second model). Symbol, footprint, and 3D from KiCad-official CAD.
Pinout
| Pin | Name | Type | Function |
|---|---|---|---|
| 1 | P1.5 | bidirectional | Standard quasi-bidirectional I/O port 1 bit P1.5 with weak pull-up after reset. |
| 2 | P1.6 | bidirectional | Standard quasi-bidirectional I/O port 1 bit P1.6 with weak pull-up after reset. |
| 3 | P1.7 | bidirectional | Standard quasi-bidirectional I/O port 1 bit P1.7 with weak pull-up after reset. |
| 4 | RST | input | Reset input; the pin must be held high for at least 24 clock cycles plus 10 us to reset the MCU, and HD versions have an internal 45K-100K pull-down. |
| 5 | P3.0 | bidirectional | Standard I/O port 3 bit P3.0 that also serves as RxD, the serial port 1 receive data input. |
| 6 | P4.3 | bidirectional | Standard I/O port 4 bit P4.3 that also serves as INT2, external interrupt 2 with falling-edge or low-level trigger (the datasheet table prints 'INT3' for this pin, see review). |
| 7 | P3.1 | bidirectional | Standard I/O port 3 bit P3.1 that also serves as TxD, the serial port 1 transmit data output. |
| 8 | P3.2 | bidirectional | Standard I/O port 3 bit P3.2 that also serves as INT0, external interrupt 0 with falling-edge or low-level trigger. |
| 9 | P3.3 | bidirectional | Standard I/O port 3 bit P3.3 that also serves as INT1, external interrupt 1 with falling-edge or low-level trigger. |
| 10 | P3.4 | bidirectional | Standard I/O port 3 bit P3.4 that also serves as T0, the external input of Timer/Counter 0. |
| 11 | P3.5 | bidirectional | Standard I/O port 3 bit P3.5 that also serves as T1, the external input of Timer/Counter 1. |
| 12 | P3.6 | bidirectional | Standard I/O port 3 bit P3.6 that also serves as WR, the external data memory write strobe. |
| 13 | P3.7 | bidirectional | Standard I/O port 3 bit P3.7 that also serves as RD, the external data memory read strobe. |
| 14 | XTAL2 | output | Output of the internal inverting oscillator amplifier connected to the other crystal terminal; it can be left floating when an external clock drives XTAL1. |
| 15 | XTAL1 | input | Input to the internal oscillator inverting amplifier, or the external clock input when an external clock source is used. |
| 16 | Gnd | power_in | Ground (power supply negative) for the device. |
| 17 | P4.0 | bidirectional | Standard I/O port 4 bit PORT4[0] with weak pull-up after reset. |
| 18 | P2.0 | bidirectional | Port 2 bit with internal pull-up, usable as standard I/O or as high-order address bus line A8. |
| 19 | P2.1 | bidirectional | Port 2 bit with internal pull-up, usable as standard I/O or as high-order address bus line A9. |
| 20 | P2.2 | bidirectional | Port 2 bit with internal pull-up, usable as standard I/O or as high-order address bus line A10. |
| 21 | P2.3 | bidirectional | Port 2 bit with internal pull-up, usable as standard I/O or as high-order address bus line A11. |
| 22 | P2.4 | bidirectional | Port 2 bit with internal pull-up, usable as standard I/O or as high-order address bus line A12. |
| 23 | P2.5 | bidirectional | Port 2 bit with internal pull-up, usable as standard I/O or as high-order address bus line A13. |
| 24 | P2.6 | bidirectional | Port 2 bit with internal pull-up, usable as standard I/O or as high-order address bus line A14. |
| 25 | P2.7 | bidirectional | Port 2 bit with internal pull-up, usable as standard I/O or as high-order address bus line A15. |
| 26 | P4.4 | bidirectional | Standard I/O port 4 bit P4.4 that on HD versions is replaced by PSEN, the external program memory read strobe output. |
| 27 | P4.5 | bidirectional | Standard I/O port 4 bit P4.5 that on HD versions is replaced by ALE, the address latch enable output (90C versions default to ALE and need AiCube-ISP setting to use as P4.5). |
| 28 | P4.1 | bidirectional | Standard I/O port 4 bit PORT4[1] with weak pull-up after reset. |
| 29 | P4.6 | bidirectional | Standard I/O port 4 bit P4.6 that on HD versions is replaced by EA; EA high or floating selects internal program memory and EA low selects external program memory from address 0000H. |
| 30 | P0.7 | bidirectional | Port 0 bit, open-drain after power-on: as I/O it needs a 10K-4.7K external pull-up, and as multiplexed address/data bus line AD7 it needs no pull-up. |
| 31 | P0.6 | bidirectional | Port 0 bit, open-drain after power-on: as I/O it needs a 10K-4.7K external pull-up, and as multiplexed address/data bus line AD6 it needs no pull-up. |
| 32 | P0.5 | bidirectional | Port 0 bit, open-drain after power-on: as I/O it needs a 10K-4.7K external pull-up, and as multiplexed address/data bus line AD5 it needs no pull-up. |
| 33 | P0.4 | bidirectional | Port 0 bit, open-drain after power-on: as I/O it needs a 10K-4.7K external pull-up, and as multiplexed address/data bus line AD4 it needs no pull-up. |
| 34 | P0.3 | bidirectional | Port 0 bit, open-drain after power-on: as I/O it needs a 10K-4.7K external pull-up, and as multiplexed address/data bus line AD3 it needs no pull-up. |
| 35 | P0.2 | bidirectional | Port 0 bit, open-drain after power-on: as I/O it needs a 10K-4.7K external pull-up, and as multiplexed address/data bus line AD2 it needs no pull-up. |
| 36 | P0.1 | bidirectional | Port 0 bit, open-drain after power-on: as I/O it needs a 10K-4.7K external pull-up, and as multiplexed address/data bus line AD1 it needs no pull-up. |
| 37 | P0.0 | bidirectional | Port 0 bit, open-drain after power-on: as I/O it needs a 10K-4.7K external pull-up, and as multiplexed address/data bus line AD0 it needs no pull-up. |
| 38 | VCC | power_in | Positive power supply; for the 5V C-grade part the datasheet selection table lists 5.5V-3.3V operation. |
| 39 | P4.2 | bidirectional | Standard I/O port 4 bit PORT4[2] that also serves as INT3, external interrupt 3 with falling-edge or low-level trigger. |
| 40 | P1.0 | bidirectional | Standard I/O port 1 bit PORT1[0] that also serves as T2, the external input of Timer/Counter 2. |
| 41 | P1.1 | bidirectional | Standard I/O port 1 bit PORT1[1] that also serves as T2EX, the Timer 2 capture/reload trigger input. |
| 42 | P1.2 | bidirectional | Standard I/O port 1 bit PORT1[2] with weak pull-up after reset. |
| 43 | P1.3 | bidirectional | Standard I/O port 1 bit PORT1[3] with weak pull-up after reset. |
| 44 | P1.4 | bidirectional | Standard I/O port 1 bit PORT1[4] with weak pull-up after reset. |
Key specifications
| Parameter | Value |
|---|---|
| Manufacturer | STC Micro |
| Package | LQFP-44(10x10) |
| Category | Embedded Processors & Controllers |
| Pins | 44 |
Electrical characteristics
Limits as printed in the datasheet (page.json metadata.characteristics carries them as data).
| Parameter | Symbol | Min | Typ | Max | Unit | Conditions | Page |
|---|---|---|---|---|---|---|---|
| VDD Operating Voltage | VDD | 3.8 | 5 | 5.5 | V | 1658 | |
| Operating Current | ICC | 4 | 20 | mA | 5V | 1658 | |
| Input Low (P0,P1,P2,P3,P4) | VIL1 | 0.8 | V | 5V | 1658 | ||
| Input Low voltage (RESET, XTAL1) | VIL2 | 1.5 | V | 5V | 1658 | ||
| Input High (P0,P1,P2,P3,P4,/EA) | VIH1 | 2 | V | 5V | 1658 | ||
| Input High (RESET) | VIH2 | 3 | V | 5V | 1658 | ||
| Sinking Current for output low (P1,P2,P3,P4) | IOL1 | 4 | 6 | mA | 5V | 1658 | |
| Sinking Current for output low (P0,ALE,PSEN) | IOL2 | 8 | 12 | mA | 5V | 1658 | |
| Sourcing Current for output high (P1,P2,P3,P4) | IOH1 | 150 | 220 | uA | 5V | 1658 | |
| Sourcing Current for output high (ALE,PSEN) | IOH2 | 14 | 20 | mA | 5V | 1658 | |
| Logic 0 input current (P1,P2,P3,P4) | IIL | 18 | 50 | uA | Vpin=0V, 5V | 1658 | |
| Logic 1 to 0 transition current (P1,P2,P3,P4) | ITL | 270 | 600 | uA | Vpin=2.0V, 5V | 1658 | |
| Storage temperature | TST | -55 | 125 | ℃ | 1658 | ||
| Operating temperature (I) | TA | -40 | 85 | ℃ | 1658 | ||
| DC power supply (5V) | VDD - VSS | -0.3 | 6 | V | 1658 | ||
| Voltage on any pin | -0.5 | 5.5 | V | 1658 |
Materials and finish
As the datasheet states them (page.json metadata.appearance; the 3D model's colours follow it).
| Part | Material | Colour / plating | Datasheet says | Page |
|---|---|---|---|---|
| housing | PC | Accumulator contents and the contents of a sixteen-bit base register, which may be either the Data Pointer or the PC. In the latter case, the PC is incremented to the address of the following | 320 |
CAD (KiCad official)
- Symbol:
STC89C516RD+40I-LQFP44 - Footprint:
Package_QFP:LQFP-44_10x10mm_P0.8mm - 3D model: LQFP-44(10x10) (KiCad packages3D, STEP)
- 3D model files:
stc89c516rd-40i-lqfp44-etched.step/stc89c516rd-40i-lqfp44-etched.glbcarry the MPN laser-etched on the die in a toggleableAdom.LaserEtchgroup (Fusion-ready);stc89c516rd-40i-lqfp44.step/stc89c516rd-40i-lqfp44.glbare the bare package body.
Provenance
Data extracted from the manufacturer datasheet, not a distributor listing:
- Datasheet: STC Micro datasheet (1691 pp, sha256
fac7be430b93e2dd, retrieved 2026-11-13, tier: lcsc) - Datasheet language: Chinese. Pin names, descriptions, and specs on this page were extracted and translated to English by ds2sf; the linked PDF is the manufacturer original.
- Extractor: parts-factory
2.0.0/extract_pins 0.3, primaryclaude-haiku-5-5(text), consensusclaude-sonnet-5-5(agreed), guards: pin_guards 0.1: passed. Pins are checked against the footprint pad set and their cited datasheet pages before publish. - CAD: KiCad official libraries (CC-BY-SA 4.0).