Loads when you scroll to it. Unloads after 5 minutes in the background.

Symbol & Footprint

Schematic Symbol

Open full view ↗
Loads when you scroll to it. Unloads after 5 minutes in the background.

PCB Footprint

Open full view ↗
Loads when you scroll to it. Unloads after 5 minutes in the background.
Loads when you scroll to it. Unloads after 5 minutes in the background.
Download PDF
Contents

README

markdown

INA282AIDR

Texas Instruments · Current Sense Amplifiers · SOIC-8

INA282AIDR from Texas Instruments, in a SOIC-8. Pinout and pin descriptions extracted from the manufacturer datasheet by ds2sf; symbol, footprint, and 3D from KiCad-official CAD.

Pinout

Pin Name Type Function
1 -IN input Negative input connected to shunt resistor for measuring voltage on the negative side; common-mode range from -14V to +80V independent of V+ supply.
2 GND power_in Ground reference.
3 REF2 input Reference voltage connection for output bias adjustment; reference input voltage range from 0 to VGND+9V with typical value 2.048V.
4 NC unconnected No internal connection; pin should be left floating or connected to GND.
5 OUT output Output voltage proportional to sensed current; swing range from GND+0.015V to (V+)-0.17V with RL=10kΩ; maximum 1nF capacitive load.
6 V+ power_in Positive power supply; operating range +2.7V to +18V; supports maximum 900μA quiescent current.
7 REF1 input Reference voltage connection for output bias adjustment; reference input voltage range from 0 to VGND+9V with typical value 2.048V.
8 +IN input Positive input connected to shunt resistor for measuring voltage on the positive side; common-mode range from -14V to +80V independent of V+ supply.

Key specifications

Parameter Value
Manufacturer Texas Instruments
Package SOIC-8
Category Amplifiers/Comparators
Pins 8

Electrical characteristics

Limits as printed in the datasheet (page.json metadata.characteristics carries them as data).

Parameter Symbol Min Typ Max Unit Conditions Page
Offset voltage, RTI VOS -70 20 70 μV VSENSE=0mV; printed ±20 typ, ±70 max 3
Common-mode rejection ratio (CMRR) CMRR 120 140 dB V+IN=-14V to +80V, VSENSE=0mV 3
Common-mode input voltage range VCM -14 80 V 3
Reference voltage rejection ratio, INA282 -75 25 75 μV/V VREF1=VREF2=40mV to 9V, V+=18V; printed ±25 typ, ±75 max 3
Gain error, INA282 -1.4 0.4 1.4 % Printed ±0.4 typ, ±1.4 max 3
Divider accuracy (reference) -0.5 0.2 0.5 % Printed ±0.2 typ, ±0.5 max 3
Offset voltage drift vs temperature dVOS/dT -1.5 0.3 1.5 μV/°C Printed ±0.3 typ, ±1.5 max 3
Power supply rejection ratio (PSRR) PSRR 3 μV/V VS=+2.7V to +18V, VSENSE=0mV 3
Reference voltage rejection drift, INA282 0.055 μV/V/°C Vs. temperature 3
Input bias current per pin IB 25 μA VSENSE=0mV 3
Input offset current IOS 1 μA VSENSE=0mV 3
Differential input impedance 6 kΩ 3
Reference input gain 1 V/V 3
Reference input voltage range 0 V Printed as 0 to VGND+9 V; max is an expression, see review_required 3
Gain, INA282 G 50 V/V V+=+5V; VREF1=VREF2=(V+)/2; GND+0.5V≤VOUT≤(V+)-0.5V 3
Gain drift vs temperature 0.0008 0.005 %/°C 3
Nonlinearity error 0.01 % 3
Output impedance 1.5 Ω 3
Maximum capacitive load 1 nF 无持续振荡 (no sustained oscillation) 3
Effective bandwidth, INA282 10 kHz 4
Voltage noise density 110 nV/√Hz 1kHz, RTI 4
Quiescent current IQ 600 900 μA 4
Specified supply voltage range VS 2.7 18 V 4
Specified operating temperature range -40 125 °C 4
Supply voltage 18 V 2
Differential voltage (V+IN)-(V-IN) -5 5 V 2
Common-mode voltage, V+IN and V-IN -14 80 V Input voltage must not exceed common-mode rating 2
Input current into any pin 5 mA 2
Storage temperature -65 150 °C 2
Junction temperature 150 °C 2
ESD rating, Human Body Model HBM 3000 V HBM 2
ESD rating, Charged Device Model CDM 1000 V CDM 2
ESD rating, Machine Model MM 200 V MM 2
Junction-to-ambient thermal resistance θJA 134.9 °C/W D (SOIC-8) package 2
Junction-to-case (top) thermal resistance θJCtop 72.9 °C/W D (SOIC-8) package 2
Junction-to-board thermal resistance θJB 61.3 °C/W D (SOIC-8) package 2
Junction-to-top characterization parameter ψJT 18.9 °C/W D (SOIC-8) package 2
Junction-to-board characterization parameter ψJB 54.3 °C/W D (SOIC-8) package 2

CAD (KiCad official)

  • Symbol: INA282AIDR
  • Footprint: Package_SO:SOIC-8_3.9x4.9mm_P1.27mm
  • 3D model: SOIC-8 (KiCad packages3D, STEP)
  • 3D model files: ina282aidr-etched.step / ina282aidr-etched.glb carry the MPN laser-etched on the die in a toggleable Adom.LaserEtch group (Fusion-ready); ina282aidr.step / ina282aidr.glb are the bare package body.

Provenance

Data extracted from the manufacturer datasheet, not a distributor listing:

  • Datasheet: Texas Instruments datasheet (38 pp, sha256 f4ba33e9202a62d5, retrieved 2026-09-23, tier: lcsc)
  • Datasheet language: Chinese. Pin names, descriptions, and specs on this page were extracted and translated to English by ds2sf; the linked PDF is the manufacturer original.
  • Extractor: parts-factory 2.0.0 / extract_pins 0.2, primary claude-haiku-4-5-20251001 (text), consensus claude-sonnet-5 (agreed), guards: pin_guards 0.1: passed. Pins are checked against the footprint pad set and their cited datasheet pages before publish.
  • CAD: KiCad official libraries (CC-BY-SA 4.0).

Datasheet PDF