Generated by kicad-footprint-generator · KiCad file format 20260206
INA282AIDR
Texas Instruments · Current Sense Amplifiers · SOIC-8
INA282AIDR from Texas Instruments, in a SOIC-8. Pinout and pin descriptions extracted from the manufacturer datasheet by ds2sf; symbol, footprint, and 3D from KiCad-official CAD.
Pinout
| Pin | Name | Type | Function |
|---|---|---|---|
| 1 | -IN | input | Negative input connected to shunt resistor for measuring voltage on the negative side; common-mode range from -14V to +80V independent of V+ supply. |
| 2 | GND | power_in | Ground reference. |
| 3 | REF2 | input | Reference voltage connection for output bias adjustment; reference input voltage range from 0 to VGND+9V with typical value 2.048V. |
| 4 | NC | unconnected | No internal connection; pin should be left floating or connected to GND. |
| 5 | OUT | output | Output voltage proportional to sensed current; swing range from GND+0.015V to (V+)-0.17V with RL=10kΩ; maximum 1nF capacitive load. |
| 6 | V+ | power_in | Positive power supply; operating range +2.7V to +18V; supports maximum 900μA quiescent current. |
| 7 | REF1 | input | Reference voltage connection for output bias adjustment; reference input voltage range from 0 to VGND+9V with typical value 2.048V. |
| 8 | +IN | input | Positive input connected to shunt resistor for measuring voltage on the positive side; common-mode range from -14V to +80V independent of V+ supply. |
Key specifications
| Parameter | Value |
|---|---|
| Manufacturer | Texas Instruments |
| Package | SOIC-8 |
| Category | Amplifiers/Comparators |
| Pins | 8 |
Electrical characteristics
Limits as printed in the datasheet (page.json metadata.characteristics carries them as data).
| Parameter | Symbol | Min | Typ | Max | Unit | Conditions | Page |
|---|---|---|---|---|---|---|---|
| Offset voltage, RTI | VOS | -70 | 20 | 70 | μV | VSENSE=0mV; printed ±20 typ, ±70 max | 3 |
| Common-mode rejection ratio (CMRR) | CMRR | 120 | 140 | dB | V+IN=-14V to +80V, VSENSE=0mV | 3 | |
| Common-mode input voltage range | VCM | -14 | 80 | V | 3 | ||
| Reference voltage rejection ratio, INA282 | -75 | 25 | 75 | μV/V | VREF1=VREF2=40mV to 9V, V+=18V; printed ±25 typ, ±75 max | 3 | |
| Gain error, INA282 | -1.4 | 0.4 | 1.4 | % | Printed ±0.4 typ, ±1.4 max | 3 | |
| Divider accuracy (reference) | -0.5 | 0.2 | 0.5 | % | Printed ±0.2 typ, ±0.5 max | 3 | |
| Offset voltage drift vs temperature | dVOS/dT | -1.5 | 0.3 | 1.5 | μV/°C | Printed ±0.3 typ, ±1.5 max | 3 |
| Power supply rejection ratio (PSRR) | PSRR | 3 | μV/V | VS=+2.7V to +18V, VSENSE=0mV | 3 | ||
| Reference voltage rejection drift, INA282 | 0.055 | μV/V/°C | Vs. temperature | 3 | |||
| Input bias current per pin | IB | 25 | μA | VSENSE=0mV | 3 | ||
| Input offset current | IOS | 1 | μA | VSENSE=0mV | 3 | ||
| Differential input impedance | 6 | kΩ | 3 | ||||
| Reference input gain | 1 | V/V | 3 | ||||
| Reference input voltage range | 0 | V | Printed as 0 to VGND+9 V; max is an expression, see review_required | 3 | |||
| Gain, INA282 | G | 50 | V/V | V+=+5V; VREF1=VREF2=(V+)/2; GND+0.5V≤VOUT≤(V+)-0.5V | 3 | ||
| Gain drift vs temperature | 0.0008 | 0.005 | %/°C | 3 | |||
| Nonlinearity error | 0.01 | % | 3 | ||||
| Output impedance | 1.5 | Ω | 3 | ||||
| Maximum capacitive load | 1 | nF | 无持续振荡 (no sustained oscillation) | 3 | |||
| Effective bandwidth, INA282 | 10 | kHz | 4 | ||||
| Voltage noise density | 110 | nV/√Hz | 1kHz, RTI | 4 | |||
| Quiescent current | IQ | 600 | 900 | μA | 4 | ||
| Specified supply voltage range | VS | 2.7 | 18 | V | 4 | ||
| Specified operating temperature range | -40 | 125 | °C | 4 | |||
| Supply voltage | 18 | V | 2 | ||||
| Differential voltage (V+IN)-(V-IN) | -5 | 5 | V | 2 | |||
| Common-mode voltage, V+IN and V-IN | -14 | 80 | V | Input voltage must not exceed common-mode rating | 2 | ||
| Input current into any pin | 5 | mA | 2 | ||||
| Storage temperature | -65 | 150 | °C | 2 | |||
| Junction temperature | 150 | °C | 2 | ||||
| ESD rating, Human Body Model | HBM | 3000 | V | HBM | 2 | ||
| ESD rating, Charged Device Model | CDM | 1000 | V | CDM | 2 | ||
| ESD rating, Machine Model | MM | 200 | V | MM | 2 | ||
| Junction-to-ambient thermal resistance | θJA | 134.9 | °C/W | D (SOIC-8) package | 2 | ||
| Junction-to-case (top) thermal resistance | θJCtop | 72.9 | °C/W | D (SOIC-8) package | 2 | ||
| Junction-to-board thermal resistance | θJB | 61.3 | °C/W | D (SOIC-8) package | 2 | ||
| Junction-to-top characterization parameter | ψJT | 18.9 | °C/W | D (SOIC-8) package | 2 | ||
| Junction-to-board characterization parameter | ψJB | 54.3 | °C/W | D (SOIC-8) package | 2 |
CAD (KiCad official)
- Symbol:
INA282AIDR - Footprint:
Package_SO:SOIC-8_3.9x4.9mm_P1.27mm - 3D model: SOIC-8 (KiCad packages3D, STEP)
- 3D model files:
ina282aidr-etched.step/ina282aidr-etched.glbcarry the MPN laser-etched on the die in a toggleableAdom.LaserEtchgroup (Fusion-ready);ina282aidr.step/ina282aidr.glbare the bare package body.
Provenance
Data extracted from the manufacturer datasheet, not a distributor listing:
- Datasheet: Texas Instruments datasheet (38 pp, sha256
f4ba33e9202a62d5, retrieved 2026-09-23, tier: lcsc) - Datasheet language: Chinese. Pin names, descriptions, and specs on this page were extracted and translated to English by ds2sf; the linked PDF is the manufacturer original.
- Extractor: parts-factory
2.0.0/extract_pins 0.2, primaryclaude-haiku-4-5-20251001(text), consensusclaude-sonnet-5(agreed), guards: pin_guards 0.1: passed. Pins are checked against the footprint pad set and their cited datasheet pages before publish. - CAD: KiCad official libraries (CC-BY-SA 4.0).