Loads when you scroll to it. Unloads after 5 minutes in the background.

Symbol & Footprint

Schematic Symbol

Open full view ↗
Loads when you scroll to it. Unloads after 5 minutes in the background.

PCB Footprint

Open full view ↗
Loads when you scroll to it. Unloads after 5 minutes in the background.
Loads when you scroll to it. Unloads after 5 minutes in the background.
Download PDF
Contents

README

markdown

PCA9543ADR

Texas Instruments · Analog Switches - Special Purpose · SOIC-14

PCA9543ADR from Texas Instruments, in a SOIC-14. Pinout and pin descriptions extracted from the manufacturer datasheet by ds2sf; symbol, footprint, and 3D from KiCad-official CAD.

Pinout

Pin Name Type Function
1 A0 input Hardware I2C slave address input bit 0. Tie directly to VCC or GND to select one of four possible device addresses on the upstream I2C bus.
2 A1 input Hardware I2C slave address input bit 1. Tie directly to VCC or GND to select one of four possible device addresses on the upstream I2C bus.
3 RESET input Active-low reset input. A low pulse (min 4 ns) resets the I2C state machine and deselects both downstream channels. Connect to VCC or VDPUM through a pull-up resistor if not used.
4 INT0 input Active-low interrupt input from downstream channel 0. Connect to VDPU0 through a pull-up resistor. ANDed with INT1 to drive the INT output.
5 SD0 bidirectional Downstream channel 0 serial data line. Bidirectional open-drain pass-gate connection to SDA when channel 0 is selected. Requires an external pull-up to VDPU0.
6 SC0 bidirectional Downstream channel 0 serial clock line. Bidirectional open-drain pass-gate connection to SCL when channel 0 is selected. Requires an external pull-up to VDPU0.
7 GND power_in Ground reference for the device. 0 V.
8 INT1 input Active-low interrupt input from downstream channel 1. Connect to VDPU1 through a pull-up resistor. ANDed with INT0 to drive the INT output.
9 SD1 bidirectional Downstream channel 1 serial data line. Bidirectional open-drain pass-gate connection to SDA when channel 1 is selected. Requires an external pull-up to VDPU1.
10 SC1 bidirectional Downstream channel 1 serial clock line. Bidirectional open-drain pass-gate connection to SCL when channel 1 is selected. Requires an external pull-up to VDPU1.
11 INT output Active-low interrupt output (open-drain) to the upstream I2C master. Asserted low when either INT0 or INT1 is asserted. Connect to VDPUM through a pull-up resistor. IOL up to 3 mA at VOL = 0.4 V.
12 SCL bidirectional Upstream I2C serial clock line from the master. Open-drain; supports 0 to 400 kHz operation. Connect to VDPUM through a pull-up resistor.
13 SDA bidirectional Upstream I2C serial data line to/from the master. Open-drain, 5.5 V tolerant. Connect to VDPUM through a pull-up resistor.
14 VCC power_in Positive supply voltage. Operating range 2.3 V to 5.5 V. VCC also sets the maximum pass-gate voltage for downstream channels, enabling level translation between mixed-voltage I2C buses.

Key specifications

Parameter Value
Manufacturer Texas Instruments
Package SOIC-14
Category Interface
Pins 14

Ordering variants

Same part, different packaging or reel option.

  • PCA9543ADR
  • PCA9543ADRD
  • PCA9543ADRPWR
  • PCA9543ADRPW

CAD (KiCad official)

  • Symbol: PCA9543ADR
  • Footprint: Package_SO:SOIC-14_3.9x8.7mm_P1.27mm
  • 3D model: SOIC-14 (KiCad packages3D, STEP)
  • 3D model files: pca9543adr-etched.step / pca9543adr-etched.glb carry the MPN laser-etched on the die in a toggleable Adom.LaserEtch group (Fusion-ready); pca9543adr.step / pca9543adr.glb are the bare package body.

Provenance

Data extracted from the manufacturer datasheet, not a distributor listing:

  • Datasheet: Texas Instruments datasheet (34 pp, sha256 669f202b834328fd, retrieved 2026-08-17, tier: manufacturer)
  • Extractor: ds2sf (Claude). Every pin and dimension is cited to a datasheet page; it refuses to fabricate.
  • CAD: KiCad official libraries (CC-BY-SA 4.0).

Datasheet PDF