3D Model
Open in new tab ↗
Loads when you scroll to it. Unloads after 5 minutes in the background.
Symbol & Footprint
Schematic Symbol
Open full view ↗Loads when you scroll to it. Unloads after 5 minutes in the background.
PCB Footprint
Open full view ↗Loads when you scroll to it. Unloads after 5 minutes in the background.
Datasheet
Open in new tab ↗Loads when you scroll to it. Unloads after 5 minutes in the background.
Contents
README
markdownH7210-25M5R
Shanghai Siproin Microelectronics · Voltage Regulators - Linear, Low Drop Out (LDO) Regulators · SOT-23-5
H7210-25M5R from Shanghai Siproin Microelectronics, in a SOT-23-5. Pinout and pin descriptions extracted from the manufacturer datasheet by ds2sf; symbol, footprint, and 3D from KiCad-official CAD.
Pinout
| Pin | Name | Type | Function |
|---|---|---|---|
| 1 | VIN | power_in | Power input pin. Supply voltage recommended 2.5V to 5.5V (absolute max 8V). Decouple with a 10uF ceramic capacitor to GND as close to the pin as possible. |
| 2 | GND | power_in | Ground reference pin (VSS). Keep the resistance low between VIN and VSS wiring to maintain stability. |
| 3 | CE | input | Chip Enable input with CMOS hysteresis. Driving CE high (typically to VIN) enables the regulator; driving CE low (to VSS) shuts the IC down to 0.1uA standby and activates the fast-discharge pull-down on VOUT (on variants with fast-discharge, e.g. H7210-33M5R). Input range 0V to 5.5V. Should be driven to a valid logic level, not left floating. |
| 4 | NC | unconnected | No connection. Leave floating or tie to a stable potential; not internally bonded to any active node. |
| 5 | VOUT | power_out | Regulated output pin. For the -25 option, VOUT = 2.5V (±2%) with up to 500mA short-term output current capability (typical, Vin-Vout=1V). Requires a >=10uF low-ESR ceramic output capacitor placed as close to the pin as possible for stable phase compensation. |
Key specifications
| Parameter | Value |
|---|---|
| Manufacturer | Shanghai Siproin Microelectronics |
| Package | SOT-23-5 |
| Category | PMIC |
| Pins | 5 |
Ordering variants
Same part, different packaging or reel option.
H7210-25M5R
Electrical characteristics
Limits as printed in the datasheet (page.json metadata.characteristics carries them as data).
| Parameter | Symbol | Min | Typ | Max | Unit | Conditions | Page |
|---|---|---|---|---|---|---|---|
| Output voltage accuracy | Vout | -2 | 2 | % | 1 | ||
| Line Regulation | △Vout1/ (△Vin·Vout) | 0.05 | 0.2 | %/V | 4.3V≤Vin≤8V, Iout=10mA | 4 | |
| Load Regulation | △Vout | 10 | 30 | mV | Vin= 4.3V, 1.0mA≤Iout≤100mA | 4 | |
| Output voltage Temperature Coefficiency | △Vout/(Ta·Vout) | -100 | 100 | Ppm/℃ | Iout=30mA, 0℃≤Ta≤70℃ | 4 | |
| Supply Current | Iss | 5 | 30 | uA | 4 | ||
| Input Voltage | Vin | 6 | V | 4 | |||
| En input voltage | 0 | 5.5 | V | unless otherwise indicated, TA = 25 °C | 3 | ||
| Junction temperature range | -40 | 125 | ℃ | 3 | |||
| Ambient temperature range | -40 | 85 | ℃ | 3 | |||
| Supply Voltage | -0.3 | 8 | V | 3 | |||
| Storage Temperature | -50 | 125 | ℃ | 3 | |||
| Operating Temperature | -40 | 85 | ℃ | 3 | |||
| Thermal Resistance (Junction to Ambient), SOT23-5 | θJA | 500 | ℃/W | Assume no ambient airflow, no heat sink | 3 | ||
| Power Dissipation, SOT23-5 | PD | 0.25 | W | PD is measured at Ta= 25℃ | 3 |
CAD (KiCad official)
- Symbol:
H7210-25M5R - Footprint:
Package_TO_SOT_SMD:SOT-23-5 - 3D model: SOT-23-5 (KiCad packages3D, STEP)
- 3D model files:
h7210-25m5r-etched.step/h7210-25m5r-etched.glbcarry the MPN laser-etched on the die in a toggleableAdom.LaserEtchgroup (Fusion-ready);h7210-25m5r.step/h7210-25m5r.glbare the bare package body.
Provenance
Data extracted from the manufacturer datasheet, not a distributor listing:
- Datasheet: Shanghai Siproin Microelectronics datasheet (6 pp, sha256
d68700857f3166ee, retrieved 2026-08-17, tier: lcsc) - Extractor:
ds2sf(Claude). Every pin and dimension is cited to a datasheet page; it refuses to fabricate. - CAD: KiCad official libraries (CC-BY-SA 4.0).