main
Download ZIP Propose a change
Generated by kicad-footprint-generator · KiCad file format 20260206
Name Last commit message Last updated
docs h7210-25m5r: re-etch, flat white mark read from pin 1 (service-occt 1.4.0) + chip hero · Ray
viewers h7210-25m5r: viewers · Ray
h7210-25m5r-etched.fit.json h7210-25m5r: re-etch, flat white mark read from pin 1 (service-occt 1.4.0) + chip hero · Ray
h7210-25m5r-etched.glb h7210-25m5r: re-etch, flat white mark read from pin 1 (service-occt 1.4.0) + chip hero · Ray
h7210-25m5r-etched.step h7210-25m5r: re-etch, flat white mark read from pin 1 (service-occt 1.4.0) + chip hero · Ray
h7210-25m5r-hero.glb h7210-25m5r: hero from the plain model · Ray
h7210-25m5r-hero.overlay.json h7210-25m5r: hero from the plain model · Ray
h7210-25m5r.glb Publish 0.1.0 · Ray
h7210-25m5r.kicad_mod Publish 0.1.0 · Ray
h7210-25m5r.kicad_sym Publish 0.1.0 · Ray
h7210-25m5r.lbr Publish 0.1.0 · Ray
h7210-25m5r.step Publish 0.1.0 · Ray
package.json Publish 0.1.2 · Ray
page.json Publish 0.1.2 · Ray
README.md h7210-25m5r: specified limits as data (metadata.characteristics, 14 rows from the datasheet) · Ray

H7210-25M5R

Shanghai Siproin Microelectronics · Voltage Regulators - Linear, Low Drop Out (LDO) Regulators · SOT-23-5

H7210-25M5R from Shanghai Siproin Microelectronics, in a SOT-23-5. Pinout and pin descriptions extracted from the manufacturer datasheet by ds2sf; symbol, footprint, and 3D from KiCad-official CAD.

Pinout

Pin Name Type Function
1 VIN power_in Power input pin. Supply voltage recommended 2.5V to 5.5V (absolute max 8V). Decouple with a 10uF ceramic capacitor to GND as close to the pin as possible.
2 GND power_in Ground reference pin (VSS). Keep the resistance low between VIN and VSS wiring to maintain stability.
3 CE input Chip Enable input with CMOS hysteresis. Driving CE high (typically to VIN) enables the regulator; driving CE low (to VSS) shuts the IC down to 0.1uA standby and activates the fast-discharge pull-down on VOUT (on variants with fast-discharge, e.g. H7210-33M5R). Input range 0V to 5.5V. Should be driven to a valid logic level, not left floating.
4 NC unconnected No connection. Leave floating or tie to a stable potential; not internally bonded to any active node.
5 VOUT power_out Regulated output pin. For the -25 option, VOUT = 2.5V (±2%) with up to 500mA short-term output current capability (typical, Vin-Vout=1V). Requires a >=10uF low-ESR ceramic output capacitor placed as close to the pin as possible for stable phase compensation.

Key specifications

Parameter Value
Manufacturer Shanghai Siproin Microelectronics
Package SOT-23-5
Category PMIC
Pins 5

Ordering variants

Same part, different packaging or reel option.

  • H7210-25M5R

Electrical characteristics

Limits as printed in the datasheet (page.json metadata.characteristics carries them as data).

Parameter Symbol Min Typ Max Unit Conditions Page
Output voltage accuracy Vout -2 2 % 1
Line Regulation △Vout1/ (△Vin·Vout) 0.05 0.2 %/V 4.3V≤Vin≤8V, Iout=10mA 4
Load Regulation △Vout 10 30 mV Vin= 4.3V, 1.0mA≤Iout≤100mA 4
Output voltage Temperature Coefficiency △Vout/(Ta·Vout) -100 100 Ppm/℃ Iout=30mA, 0℃≤Ta≤70℃ 4
Supply Current Iss 5 30 uA 4
Input Voltage Vin 6 V 4
En input voltage 0 5.5 V unless otherwise indicated, TA = 25 °C 3
Junction temperature range -40 125 ℃ 3
Ambient temperature range -40 85 ℃ 3
Supply Voltage -0.3 8 V 3
Storage Temperature -50 125 ℃ 3
Operating Temperature -40 85 ℃ 3
Thermal Resistance (Junction to Ambient), SOT23-5 θJA 500 ℃/W Assume no ambient airflow, no heat sink 3
Power Dissipation, SOT23-5 PD 0.25 W PD is measured at Ta= 25℃ 3

CAD (KiCad official)

  • Symbol: H7210-25M5R
  • Footprint: Package_TO_SOT_SMD:SOT-23-5
  • 3D model: SOT-23-5 (KiCad packages3D, STEP)
  • 3D model files: h7210-25m5r-etched.step / h7210-25m5r-etched.glb carry the MPN laser-etched on the die in a toggleable Adom.LaserEtch group (Fusion-ready); h7210-25m5r.step / h7210-25m5r.glb are the bare package body.

Provenance

Data extracted from the manufacturer datasheet, not a distributor listing:

  • Datasheet: Shanghai Siproin Microelectronics datasheet (6 pp, sha256 d68700857f3166ee, retrieved 2026-08-17, tier: lcsc)
  • Extractor: ds2sf (Claude). Every pin and dimension is cited to a datasheet page; it refuses to fabricate.
  • CAD: KiCad official libraries (CC-BY-SA 4.0).

Datasheet PDF