Loads when you scroll to it. Unloads after 5 minutes in the background.

Symbol & Footprint

Schematic Symbol

Open full view ↗
Loads when you scroll to it. Unloads after 5 minutes in the background.

PCB Footprint

Open full view ↗
Loads when you scroll to it. Unloads after 5 minutes in the background.
Loads when you scroll to it. Unloads after 5 minutes in the background.
Download PDF
Contents

README

markdown

STM706YM7F

STMicroelectronics · Supervisor And Reset ICs · SOP-8

STM706YM7F from STMicroelectronics, in a SOP-8. Pinout and pin descriptions extracted from the manufacturer datasheet (extract_pins, cross-checked by a second model); symbol, footprint, and 3D from KiCad-official CAD.

Pinout

Pin Name Type Function
1 MR input Active-low manual reset input with internal pull-up; asserts reset when driven low, remains asserted for minimum 140-280 ms (trec) after rising edge.
2 VCC power_out 5 V nominal supply voltage input; operating range 1.0 V to 5.5 V, typical supply current 40 μA.
3 VSS power_in Ground reference.
4 PFI input Power-fail input; compared to internal 1.20-1.30 V threshold (VPFI) to detect supply undervoltage condition.
5 PFO output Push-pull power-fail output; driven low when PFI falls below VPFI (1.20-1.30 V) to provide early warning of power failure.
6 WDI input Watchdog input; requires rising or falling edge transition within 1.6 s timeout period to prevent watchdog reset trigger; can be disabled by floating.
7 RST output Active-low reset output; asserted low when VCC < VRST (4.25-4.50 V for STM706), MR is low, or watchdog timeout occurs; minimum pulse width trec = 140-280 ms.
8 WDO output Push-pull watchdog output; driven low when watchdog timeout occurs or VCC falls below reset threshold; returns high upon WDI edge detection or VCC recovery above threshold.

Key specifications

Parameter Value
Manufacturer STMicroelectronics
Package SOP-8
Category Power Management (PMIC)
Pins 8

CAD (KiCad official)

  • Symbol: STM706YM7F
  • Footprint: Package_SO:SOIC-8_3.9x4.9mm_P1.27mm
  • 3D model: SOP-8 (KiCad packages3D, STEP)
  • 3D model files: stm706ym7f-etched.step / stm706ym7f-etched.glb carry the MPN laser-etched on the die in a toggleable Adom.LaserEtch group (Fusion-ready); stm706ym7f.step / stm706ym7f.glb are the bare package body.

Provenance

Data extracted from the manufacturer datasheet, not a distributor listing:

  • Datasheet: STMicroelectronics datasheet (33 pp, sha256 8dd84b398c8ff01b, retrieved 2026-10-01, tier: lcsc)
  • Extractor: parts-factory 2.0.0 / extract_pins 0.3, primary claude-haiku-4-5-20251001 (text), consensus claude-sonnet-5-5 (agreed), guards: pin_guards 0.1: passed. Pins are checked against the footprint pad set and their cited datasheet pages before publish.
  • CAD: KiCad official libraries (CC-BY-SA 4.0).

Datasheet PDF