Loads when you scroll to it. Unloads after 5 minutes in the background.

Symbol & Footprint

Schematic Symbol

Open full view ↗
Loads when you scroll to it. Unloads after 5 minutes in the background.

PCB Footprint

Open full view ↗
Loads when you scroll to it. Unloads after 5 minutes in the background.
Loads when you scroll to it. Unloads after 5 minutes in the background.
Download PDF
Contents

README

markdown

TMP122AMDBVTEP

Texas Instruments · Temperature Sensors · SOT-23-6

TMP122AMDBVTEP from Texas Instruments, in a SOT-23-6. Pinout and pin descriptions extracted from the manufacturer datasheet (extract_pins, cross-checked by a second model). Symbol and footprint from KiCad-official CAD; the 3D model is generated from the datasheet's package dimensions.

Pinout

Pin Name Type Function
1 ALERT output Open-drain thermostat alert output (needs a pull-up resistor), active low by default with POL=0 and polarity-programmable, with VOL of 0.4 V max at 4 mA sink and leakage of ±1 µA over 0 to 6 V.
2 GND power_in Ground reference for the supply and digital interface.
3 V+ power_in Positive supply input, 2.7 V to 5.5 V operating range (7 V absolute maximum), with a 0.1 µF bypass capacitor recommended.
4 SCK input SPI serial clock input, with minimum SCK period of 100 ns and input levels of 0.7(V+) VIH and 0.3(V+) VIL.
5 CS input Active-low chip select input that initiates communication when pulled low, with input levels of 0.7(V+) VIH and 0.3(V+) VIL.
6 SO/I bidirectional SPI serial data line that outputs temperature and register data and accepts commands, with VOL of 0.4 V max at 3 mA sink and VOH of (V+)-0.4 V min at 2 mA source.

Key specifications

Parameter Value
Manufacturer Texas Instruments
Package SOT-23-6
Category Sensors
Pins 6

Electrical characteristics

Limits as printed in the datasheet (page.json metadata.characteristics carries them as data).

Parameter Symbol Min Typ Max Unit Conditions Page
Temperature accuracy (-25°C to 85°C) -1.5 0.5 1.5 °C -25°C to 85°C 3
Temperature accuracy (-55°C to 125°C) -2 1 2 °C -55°C to 125°C 3
Temperature accuracy (-55°C to 150°C) -1.5 1.5 °C -55°C to 150°C 3
Temperature error vs supply 0.1 °C/V 3
Input current, SO/I, SCK, CS -1 1 µA 0 V ≤ VIN ≤ V+ 3
Output low voltage SO/I VOL 0.4 V ISINK = 3 mA 3
Output low voltage ALERT VOL 0.4 V ISINK = 4 mA 3
Leakage current ALERT -1 1 µA 0 V ≤ VIN ≤ 6 V 3
Input capacitance SO/I, SCK, CS, ALERT 2.5 pF 3
Conversion time, 9 bit + sign 30 40 ms 3
Conversion time, 10 bit + sign 60 80 ms 3
Conversion time, 11 bit + sign 120 160 ms 3
Conversion time, 12 bit + sign 240 320 ms 3
Power supply operating range V+ 2.7 5.5 V 3
Quiescent current, serial bus inactive IQ 50 75 µA Serial bus inactive 3
Shutdown current, serial bus inactive ISD 0.1 1 µA Serial bus inactive 3
Temperature specified range -55 125 °C 3
Temperature operating range -55 150 °C 3
Temperature storage range -60 150 °C 3
Thermal resistance, junction to ambient θJA 200 °C/W SOT23-6 surface-mount 3
Power supply voltage V+ 7 V 2
Input voltage VI -0.3 7 V 2
Input current (printed as 'Inout current') 10 mA 2
Operating temperature range (absolute maximum) -55 150 °C 2
Storage temperature range (absolute maximum) -60 150 °C 2
Junction temperature (max) TJ 150 °C 2
Lead temperature (soldering) 300 °C 2
SCK period t1 100 ns 11
Data in to rising edge SCK setup time t2 20 ns 11
SCK falling edge to output data delay t3 30 ns 11
SCK rising edge to input data hold time t4 20 ns 11
CS to rising edge SCK set-up time t5 40 ns 11
CS to output data delay t6 30 ns 11
CS rising edge to output high impedance t7 30 ns 11

CAD (land: KiCad; 3D: generated from the datasheet)

  • Symbol: TMP122AMDBVTEP
  • Footprint: Package_TO_SOT_SMD:SOT-23-6
  • 3D model: SOT-23-6, generated on the KiCad land (body 1.6 x 2.9 mm, terminals on the pads, 1.175 mm tall, datasheet A, midpoint of min and max). KiCad's stock model for this land is taller than the datasheet allows, so the model is generated from the datasheet drawing; the dimensions come from the datasheet drawing where it was read and are defaults otherwise (see provenance.model_3d_generated), not the manufacturer's CAD (STEP)
  • 3D model files: tmp122amdbvtep-etched.step / tmp122amdbvtep-etched.glb carry the MPN laser-etched on the die in a toggleable Adom.LaserEtch group (Fusion-ready); tmp122amdbvtep.step / tmp122amdbvtep.glb are the bare package body.

Provenance

Data extracted from the manufacturer datasheet, not a distributor listing:

  • Datasheet: Texas Instruments datasheet (20 pp, sha256 237b8e788e74a914, retrieved 2026-11-13, tier: manufacturer)
  • Extractor: parts-factory 2.0.0 / extract_pins 0.3, primary claude-sonnet-5-5 (text+vision), consensus claude-opus-5-5 (agreed), guards: pin_guards 0.1: passed. Pins are checked against the footprint pad set and their cited datasheet pages before publish.
  • CAD: land: KiCad official libraries (CC-BY-SA 4.0); 3D: generated from the datasheet's package dimensions (provenance.model_3d_generated).

Datasheet PDF