Generated by kicad-footprint-generator · KiCad file format 20260206
TMP122AMDBVTEP
Texas Instruments · Temperature Sensors · SOT-23-6
TMP122AMDBVTEP from Texas Instruments, in a SOT-23-6. Pinout and pin descriptions extracted from the manufacturer datasheet (extract_pins, cross-checked by a second model). Symbol and footprint from KiCad-official CAD; the 3D model is generated from the datasheet's package dimensions.
Pinout
| Pin | Name | Type | Function |
|---|---|---|---|
| 1 | ALERT | output | Open-drain thermostat alert output (needs a pull-up resistor), active low by default with POL=0 and polarity-programmable, with VOL of 0.4 V max at 4 mA sink and leakage of ±1 µA over 0 to 6 V. |
| 2 | GND | power_in | Ground reference for the supply and digital interface. |
| 3 | V+ | power_in | Positive supply input, 2.7 V to 5.5 V operating range (7 V absolute maximum), with a 0.1 µF bypass capacitor recommended. |
| 4 | SCK | input | SPI serial clock input, with minimum SCK period of 100 ns and input levels of 0.7(V+) VIH and 0.3(V+) VIL. |
| 5 | CS | input | Active-low chip select input that initiates communication when pulled low, with input levels of 0.7(V+) VIH and 0.3(V+) VIL. |
| 6 | SO/I | bidirectional | SPI serial data line that outputs temperature and register data and accepts commands, with VOL of 0.4 V max at 3 mA sink and VOH of (V+)-0.4 V min at 2 mA source. |
Key specifications
| Parameter | Value |
|---|---|
| Manufacturer | Texas Instruments |
| Package | SOT-23-6 |
| Category | Sensors |
| Pins | 6 |
Electrical characteristics
Limits as printed in the datasheet (page.json metadata.characteristics carries them as data).
| Parameter | Symbol | Min | Typ | Max | Unit | Conditions | Page |
|---|---|---|---|---|---|---|---|
| Temperature accuracy (-25°C to 85°C) | -1.5 | 0.5 | 1.5 | °C | -25°C to 85°C | 3 | |
| Temperature accuracy (-55°C to 125°C) | -2 | 1 | 2 | °C | -55°C to 125°C | 3 | |
| Temperature accuracy (-55°C to 150°C) | -1.5 | 1.5 | °C | -55°C to 150°C | 3 | ||
| Temperature error vs supply | 0.1 | °C/V | 3 | ||||
| Input current, SO/I, SCK, CS | -1 | 1 | µA | 0 V ≤ VIN ≤ V+ | 3 | ||
| Output low voltage SO/I | VOL | 0.4 | V | ISINK = 3 mA | 3 | ||
| Output low voltage ALERT | VOL | 0.4 | V | ISINK = 4 mA | 3 | ||
| Leakage current ALERT | -1 | 1 | µA | 0 V ≤ VIN ≤ 6 V | 3 | ||
| Input capacitance SO/I, SCK, CS, ALERT | 2.5 | pF | 3 | ||||
| Conversion time, 9 bit + sign | 30 | 40 | ms | 3 | |||
| Conversion time, 10 bit + sign | 60 | 80 | ms | 3 | |||
| Conversion time, 11 bit + sign | 120 | 160 | ms | 3 | |||
| Conversion time, 12 bit + sign | 240 | 320 | ms | 3 | |||
| Power supply operating range | V+ | 2.7 | 5.5 | V | 3 | ||
| Quiescent current, serial bus inactive | IQ | 50 | 75 | µA | Serial bus inactive | 3 | |
| Shutdown current, serial bus inactive | ISD | 0.1 | 1 | µA | Serial bus inactive | 3 | |
| Temperature specified range | -55 | 125 | °C | 3 | |||
| Temperature operating range | -55 | 150 | °C | 3 | |||
| Temperature storage range | -60 | 150 | °C | 3 | |||
| Thermal resistance, junction to ambient | θJA | 200 | °C/W | SOT23-6 surface-mount | 3 | ||
| Power supply voltage | V+ | 7 | V | 2 | |||
| Input voltage | VI | -0.3 | 7 | V | 2 | ||
| Input current (printed as 'Inout current') | 10 | mA | 2 | ||||
| Operating temperature range (absolute maximum) | -55 | 150 | °C | 2 | |||
| Storage temperature range (absolute maximum) | -60 | 150 | °C | 2 | |||
| Junction temperature (max) | TJ | 150 | °C | 2 | |||
| Lead temperature (soldering) | 300 | °C | 2 | ||||
| SCK period | t1 | 100 | ns | 11 | |||
| Data in to rising edge SCK setup time | t2 | 20 | ns | 11 | |||
| SCK falling edge to output data delay | t3 | 30 | ns | 11 | |||
| SCK rising edge to input data hold time | t4 | 20 | ns | 11 | |||
| CS to rising edge SCK set-up time | t5 | 40 | ns | 11 | |||
| CS to output data delay | t6 | 30 | ns | 11 | |||
| CS rising edge to output high impedance | t7 | 30 | ns | 11 |
CAD (land: KiCad; 3D: generated from the datasheet)
- Symbol:
TMP122AMDBVTEP - Footprint:
Package_TO_SOT_SMD:SOT-23-6 - 3D model: SOT-23-6, generated on the KiCad land (body 1.6 x 2.9 mm, terminals on the pads, 1.175 mm tall, datasheet A, midpoint of min and max). KiCad's stock model for this land is taller than the datasheet allows, so the model is generated from the datasheet drawing; the dimensions come from the datasheet drawing where it was read and are defaults otherwise (see provenance.model_3d_generated), not the manufacturer's CAD (STEP)
- 3D model files:
tmp122amdbvtep-etched.step/tmp122amdbvtep-etched.glbcarry the MPN laser-etched on the die in a toggleableAdom.LaserEtchgroup (Fusion-ready);tmp122amdbvtep.step/tmp122amdbvtep.glbare the bare package body.
Provenance
Data extracted from the manufacturer datasheet, not a distributor listing:
- Datasheet: Texas Instruments datasheet (20 pp, sha256
237b8e788e74a914, retrieved 2026-11-13, tier: manufacturer) - Extractor: parts-factory
2.0.0/extract_pins 0.3, primaryclaude-sonnet-5-5(text+vision), consensusclaude-opus-5-5(agreed), guards: pin_guards 0.1: passed. Pins are checked against the footprint pad set and their cited datasheet pages before publish. - CAD: land: KiCad official libraries (CC-BY-SA 4.0); 3D: generated from the datasheet's package dimensions (provenance.model_3d_generated).