Loads when you scroll to it. Unloads after 5 minutes in the background.

Symbol & Footprint

Schematic Symbol

Open full view ↗
Loads when you scroll to it. Unloads after 5 minutes in the background.

PCB Footprint

Open full view ↗
Loads when you scroll to it. Unloads after 5 minutes in the background.
Loads when you scroll to it. Unloads after 5 minutes in the background.
Download PDF
Contents

README

markdown

MAX6751KA46+T

Maxim Integrated · Monitors & Reset Circuits · SOT-23-8

MAX6751KA46+T from Maxim Integrated, in a SOT-23-8. Pinout and pin descriptions extracted from the manufacturer datasheet (extract_pins, cross-checked by a second model); symbol, footprint, and 3D from KiCad-official CAD.

Pinout

Pin Name Type Function
1 RESET IN input High-impedance input to the adjustable reset comparator (threshold 1.235V typ); connect to the center of an external resistor divider to set the monitored voltage threshold.
2 SWT passive Watchdog timeout input; connect a capacitor to ground to set tWD = 4.94 x 10^6 x CSWT, or connect SWT to ground to disable the watchdog timer.
3 SRT passive Reset timeout input; connect a capacitor from SRT to GND to set tRP = 4.94 x 10^6 x CSRT.
4 GND power_in Ground.
5 WDS input Watchdog select input; connect to ground for normal mode or to VCC for extended mode (timeout multiplied by 128), and a state change clears the watchdog timer.
6 WDI input Watchdog input; a falling transition must occur within the watchdog timeout period or a reset pulse occurs, and it must not be left floating (use a 100k resistor to ground if unused).
7 RESET output Open-drain active-low reset output (MAX6751) that asserts when VCC or RESET IN falls below its threshold or on a watchdog fault, and stays low for the reset timeout period after conditions clear.
8 VCC power_in Supply voltage input (1.0V to 5.5V for TA 0°C to +125°C) and input for the fixed-threshold VCC monitor.

Key specifications

Parameter Value
Manufacturer Maxim Integrated
Package SOT-23-8
Category Power Supply Chip
Pins 8

Electrical characteristics

Limits as printed in the datasheet (page.json metadata.characteristics carries them as data).

Parameter Symbol Min Typ Max Unit Conditions Page
Supply Voltage VCC 1 5.5 V TA = 0°C to +125°C 2
Supply Voltage VCC 1.2 5.5 V TA = -40°C to 0°C 2
Supply Current ICC 5 10 µA VCC ≤ 5.5V 2
Supply Current ICC 4.2 9 µA VCC ≤ 3.3V 2
Supply Current ICC 3.7 8 µA VCC ≤ 2.0V 2
VCC Reset Threshold (suffix 46) VTH 4.533 4.625 4.718 V Suffix 46 per Table 2; TA = -40°C to +125°C 13
Reset Timeout Period tRP 5.692 7.59 9.487 ms CSRT = 1500pF 2
SRT Ramp Current IRAMP 200 250 300 nA VSRT = 0 to 1.23V; VCC = 1.6V to 5V 2
SRT Ramp Threshold VRAMP 1.173 1.235 1.297 V VCC = 1.6V to 5V (VRAMP rising) 2
Normal Watchdog Timeout Period (MAX6746-MAX6751) tWD 5.692 7.59 9.487 ms CSWT = 1500pF 3
Extended Watchdog Timeout (MAX6746-MAX6751) tWD 728.6 971.5 1214.4 ms CSWT = 1500pF 3
SWT Ramp Current IRAMP 200 250 300 nA VSWT = 0 to 1.23V, VCC = 1.6V to 5V 3
SWT Ramp Threshold VRAMP 1.173 1.235 1.297 V VCC = 1.6V to 5V (VRAMP rising) 3
RESET IN Threshold VRESET IN 1.216 1.235 1.254 V TA = -40°C to +125°C 4
RESET IN Leakage Current IRESET IN -50 1 50 nA 4
VCC to GND (absolute maximum) VCC -0.3 6 V 2
SRT, SWT, SET0, SET1, RESET IN, WDS, MR, WDI to GND (absolute maximum) -0.3 V 2
RESET (Open-Drain) to GND (absolute maximum) -0.3 6 V 2
Input Current (All Pins) -20 20 mA 2
Output Current (RESET) -20 20 mA 2
Operating Temperature Range -40 125 °C 2
Storage Temperature Range -65 150 °C 2
Junction Temperature 150 °C 2
Lead Temperature (soldering, 10s) 300 °C soldering, 10s 2
Soldering Temperature (reflow) 260 °C 2
Thermal Resistance, Four-Layer Board, Junction-to-Ambient qJA 196 °C/W JESD51-7, four-layer board 2
Thermal Resistance, Four-Layer Board, Junction-to-Case qJC 70 °C/W JESD51-7, four-layer board 2
Thermal Resistance, Single-Layer Board, Junction-to-Case qJC 800 °C/W single-layer board 2

CAD (KiCad official)

  • Symbol: MAX6751KA46+T
  • Footprint: Package_TO_SOT_SMD:SOT-23-8
  • 3D model: SOT-23-8 (KiCad packages3D, STEP)
  • 3D model files: max6751ka46-t-etched.step / max6751ka46-t-etched.glb carry the MPN laser-etched on the die in a toggleable Adom.LaserEtch group (Fusion-ready); max6751ka46-t.step / max6751ka46-t.glb are the bare package body.

Provenance

Data extracted from the manufacturer datasheet, not a distributor listing:

  • Datasheet: Maxim Integrated datasheet (15 pp, sha256 144a666c7b8478b6, retrieved 2026-10-31, tier: manufacturer)
  • Extractor: parts-factory 2.0.0 / extract_pins 0.3, primary claude-haiku-5-5 (text), consensus claude-sonnet-5-5 (agreed), guards: pin_guards 0.1: passed. Pins are checked against the footprint pad set and their cited datasheet pages before publish.
  • CAD: KiCad official libraries (CC-BY-SA 4.0).

Datasheet PDF