Generated by kicad-footprint-generator · KiCad file format 20260206
MAX6751KA46+T
Maxim Integrated · Monitors & Reset Circuits · SOT-23-8
MAX6751KA46+T from Maxim Integrated, in a SOT-23-8. Pinout and pin descriptions extracted from the manufacturer datasheet (extract_pins, cross-checked by a second model); symbol, footprint, and 3D from KiCad-official CAD.
Pinout
| Pin | Name | Type | Function |
|---|---|---|---|
| 1 | RESET IN | input | High-impedance input to the adjustable reset comparator (threshold 1.235V typ); connect to the center of an external resistor divider to set the monitored voltage threshold. |
| 2 | SWT | passive | Watchdog timeout input; connect a capacitor to ground to set tWD = 4.94 x 10^6 x CSWT, or connect SWT to ground to disable the watchdog timer. |
| 3 | SRT | passive | Reset timeout input; connect a capacitor from SRT to GND to set tRP = 4.94 x 10^6 x CSRT. |
| 4 | GND | power_in | Ground. |
| 5 | WDS | input | Watchdog select input; connect to ground for normal mode or to VCC for extended mode (timeout multiplied by 128), and a state change clears the watchdog timer. |
| 6 | WDI | input | Watchdog input; a falling transition must occur within the watchdog timeout period or a reset pulse occurs, and it must not be left floating (use a 100k resistor to ground if unused). |
| 7 | RESET | output | Open-drain active-low reset output (MAX6751) that asserts when VCC or RESET IN falls below its threshold or on a watchdog fault, and stays low for the reset timeout period after conditions clear. |
| 8 | VCC | power_in | Supply voltage input (1.0V to 5.5V for TA 0°C to +125°C) and input for the fixed-threshold VCC monitor. |
Key specifications
| Parameter | Value |
|---|---|
| Manufacturer | Maxim Integrated |
| Package | SOT-23-8 |
| Category | Power Supply Chip |
| Pins | 8 |
Electrical characteristics
Limits as printed in the datasheet (page.json metadata.characteristics carries them as data).
| Parameter | Symbol | Min | Typ | Max | Unit | Conditions | Page |
|---|---|---|---|---|---|---|---|
| Supply Voltage | VCC | 1 | 5.5 | V | TA = 0°C to +125°C | 2 | |
| Supply Voltage | VCC | 1.2 | 5.5 | V | TA = -40°C to 0°C | 2 | |
| Supply Current | ICC | 5 | 10 | µA | VCC ≤ 5.5V | 2 | |
| Supply Current | ICC | 4.2 | 9 | µA | VCC ≤ 3.3V | 2 | |
| Supply Current | ICC | 3.7 | 8 | µA | VCC ≤ 2.0V | 2 | |
| VCC Reset Threshold (suffix 46) | VTH | 4.533 | 4.625 | 4.718 | V | Suffix 46 per Table 2; TA = -40°C to +125°C | 13 |
| Reset Timeout Period | tRP | 5.692 | 7.59 | 9.487 | ms | CSRT = 1500pF | 2 |
| SRT Ramp Current | IRAMP | 200 | 250 | 300 | nA | VSRT = 0 to 1.23V; VCC = 1.6V to 5V | 2 |
| SRT Ramp Threshold | VRAMP | 1.173 | 1.235 | 1.297 | V | VCC = 1.6V to 5V (VRAMP rising) | 2 |
| Normal Watchdog Timeout Period (MAX6746-MAX6751) | tWD | 5.692 | 7.59 | 9.487 | ms | CSWT = 1500pF | 3 |
| Extended Watchdog Timeout (MAX6746-MAX6751) | tWD | 728.6 | 971.5 | 1214.4 | ms | CSWT = 1500pF | 3 |
| SWT Ramp Current | IRAMP | 200 | 250 | 300 | nA | VSWT = 0 to 1.23V, VCC = 1.6V to 5V | 3 |
| SWT Ramp Threshold | VRAMP | 1.173 | 1.235 | 1.297 | V | VCC = 1.6V to 5V (VRAMP rising) | 3 |
| RESET IN Threshold | VRESET IN | 1.216 | 1.235 | 1.254 | V | TA = -40°C to +125°C | 4 |
| RESET IN Leakage Current | IRESET IN | -50 | 1 | 50 | nA | 4 | |
| VCC to GND (absolute maximum) | VCC | -0.3 | 6 | V | 2 | ||
| SRT, SWT, SET0, SET1, RESET IN, WDS, MR, WDI to GND (absolute maximum) | -0.3 | V | 2 | ||||
| RESET (Open-Drain) to GND (absolute maximum) | -0.3 | 6 | V | 2 | |||
| Input Current (All Pins) | -20 | 20 | mA | 2 | |||
| Output Current (RESET) | -20 | 20 | mA | 2 | |||
| Operating Temperature Range | -40 | 125 | °C | 2 | |||
| Storage Temperature Range | -65 | 150 | °C | 2 | |||
| Junction Temperature | 150 | °C | 2 | ||||
| Lead Temperature (soldering, 10s) | 300 | °C | soldering, 10s | 2 | |||
| Soldering Temperature (reflow) | 260 | °C | 2 | ||||
| Thermal Resistance, Four-Layer Board, Junction-to-Ambient | qJA | 196 | °C/W | JESD51-7, four-layer board | 2 | ||
| Thermal Resistance, Four-Layer Board, Junction-to-Case | qJC | 70 | °C/W | JESD51-7, four-layer board | 2 | ||
| Thermal Resistance, Single-Layer Board, Junction-to-Case | qJC | 800 | °C/W | single-layer board | 2 |
CAD (KiCad official)
- Symbol:
MAX6751KA46+T - Footprint:
Package_TO_SOT_SMD:SOT-23-8 - 3D model: SOT-23-8 (KiCad packages3D, STEP)
- 3D model files:
max6751ka46-t-etched.step/max6751ka46-t-etched.glbcarry the MPN laser-etched on the die in a toggleableAdom.LaserEtchgroup (Fusion-ready);max6751ka46-t.step/max6751ka46-t.glbare the bare package body.
Provenance
Data extracted from the manufacturer datasheet, not a distributor listing:
- Datasheet: Maxim Integrated datasheet (15 pp, sha256
144a666c7b8478b6, retrieved 2026-10-31, tier: manufacturer) - Extractor: parts-factory
2.0.0/extract_pins 0.3, primaryclaude-haiku-5-5(text), consensusclaude-sonnet-5-5(agreed), guards: pin_guards 0.1: passed. Pins are checked against the footprint pad set and their cited datasheet pages before publish. - CAD: KiCad official libraries (CC-BY-SA 4.0).