component
TLV76733DGNR
Public Made by Adomby adom
Texas Instruments Voltage Regulators - Linear, Low Drop Out (LDO) Regulators, HVSSOP-8. Pinout cross-checked by two models against the datasheet, KiCad symbol/footprint/3D.
3D Model
Open in new tab ↗
Loads on click. Unloads only if this page sits in the background.
Symbol & Footprint
Schematic Symbol
Open full view ↗Loads on click. Unloads only if this page sits in the background.
PCB Footprint
Open full view ↗Loads on click. Unloads only if this page sits in the background.
Datasheet
Open in new tab ↗Loads on click. Unloads only if this page sits in the background.
README
markdownTLV76733DGNR
Texas Instruments · Voltage Regulators - Linear, Low Drop Out (LDO) Regulators · HVSSOP-8
TLV76733DGNR from Texas Instruments, in a HVSSOP-8. Pinout and pin descriptions extracted from the manufacturer datasheet (extract_pins, cross-checked by a second model); symbol, footprint, and 3D from KiCad-official CAD.
Pinout
| Pin | Name | Type | Function |
|---|---|---|---|
| 1 | OUT | output | Output pin providing regulated 3.3V; place the output capacitor as close to OUT and GND pins as possible. |
| 2 | SNS | input | Output sense pin for fixed-voltage devices; connect to OUT pin or remotely sense output voltage at load; do not float this pin. |
| 3 | NC | unconnected | Do not connect to a biased voltage; tie this pin to ground or leave floating. |
| 4 | GND | power_in | Ground pin; all ground pins must be grounded for proper device operation. |
| 5 | EN | input | Enable pin; drive high to enable the device, drive low to disable; has internal pullup and can be left floating to enable. |
| 6 | GND | power_in | Ground pin; all ground pins must be grounded for proper device operation. |
| 7 | NC | unconnected | Do not connect to a biased voltage; tie this pin to ground or leave floating. |
| 8 | IN | power_in | Input pin accepting 2.5V to 16V supply voltage; place input capacitor as close to IN and GND pins as possible. |
| 9 | Thermal pad | passive | Exposed pad (from the footprint; not named in the datasheet pin table). |
Key specifications
| Parameter | Value |
|---|---|
| Manufacturer | Texas Instruments |
| Package | HVSSOP-8 |
| Category | Power Management (PMIC) |
| Pins | 9 |
CAD (KiCad official)
- Symbol:
TLV76733DGNR - Footprint:
Package_SO:HVSSOP-8-1EP_3x3mm_P0.65mm_EP1.57x1.89mm - 3D model: HVSSOP-8, generated from the KiCad footprint (body from the F.Fab outline, terminals on the pads, 1.0 mm nominal HVSSOP height). Neither the vendor nor KiCad ships a 3D model for this package, so the dimensions are nominal, not the manufacturer's CAD (STEP)
- 3D model files:
tlv76733dgnr-etched.step/tlv76733dgnr-etched.glbcarry the MPN laser-etched on the die in a toggleableAdom.LaserEtchgroup (Fusion-ready);tlv76733dgnr.step/tlv76733dgnr.glbare the bare package body.
Provenance
Data extracted from the manufacturer datasheet, not a distributor listing:
- Datasheet: Texas Instruments datasheet (45 pp, sha256
c631d45696a7ef20, retrieved 2026-10-01, tier: lcsc) - Datasheet language: Chinese. Pin names, descriptions, and specs on this page were extracted and translated to English by ds2sf; the linked PDF is the manufacturer original.
- Extractor: parts-factory
2.0.0/extract_pins 0.2, primaryclaude-haiku-4-5-20251001(text), consensusclaude-sonnet-5-5(agreed), guards: pin_guards 0.1: passed. Pins are checked against the footprint pad set and their cited datasheet pages before publish. - CAD: KiCad official libraries (CC-BY-SA 4.0).