Loads when you scroll to it. Unloads after 5 minutes in the background.

Symbol & Footprint

Schematic Symbol

Open full view ↗
Loads when you scroll to it. Unloads after 5 minutes in the background.

PCB Footprint

Open full view ↗
Loads when you scroll to it. Unloads after 5 minutes in the background.
Loads when you scroll to it. Unloads after 5 minutes in the background.
Download PDF
Contents

README

markdown

LPV821DBVR

Texas Instruments · Precision OpAmps · SOT-23-5

LPV821DBVR from Texas Instruments, in a SOT-23-5. Pinout and pin descriptions extracted from the manufacturer datasheet (extract_pins, cross-checked by a second model). Symbol and footprint from KiCad-official CAD; the 3D model is generated from the datasheet's package dimensions.

Pinout

Pin Name Type Function
1 OUT output Amplifier output, rail-to-rail swinging within 12 mV of the supply rails.
2 V- power_in Negative (lowest) power supply; supply span VS = (V+) - (V-) is 1.7 V to 3.6 V.
3 +IN input Non-inverting input with rail-to-rail common-mode range; limit input current to 10 mA if it exceeds the supply rails by more than 0.3 V.
4 -IN input Inverting input with rail-to-rail common-mode range; limit input current to 10 mA if it exceeds the supply rails by more than 0.3 V.
5 V+ power_in Positive (highest) power supply; operates from 1.7 V to 3.6 V above V- (absolute maximum 4 V).

Key specifications

Parameter Value
Manufacturer Texas Instruments
Package SOT-23-5
Category Amplifiers
Pins 5

Electrical characteristics

Limits as printed in the datasheet (page.json metadata.characteristics carries them as data).

Parameter Symbol Min Typ Max Unit Conditions Page
Input offset voltage VOS -10 1.5 10 μV VS = 3.3 V 5
Input offset voltage drift dVOS/dT -0.096 0.02 0.096 μV/°C TA = -40°C to 125°C, VS = 3.3 V 5
Power-supply rejection ratio PSRR 0.4 4.5 μV/V VS = 1.8 V to 3.3 V 5
Common-mode rejection ratio CMRR 100 125 dB (V-) ≤ VCM ≤ (V+), VS = 3.3 V 5
Quiescent current per channel IQ 650 790 nA VCM = VS/2, IO = 0, VS = 3.3 V 5
Input bias current +IN IB 7 pA TA= 25°C 5
Input offset current IOS 14 pA 5
Input voltage noise En 3.9 μVPP f = 0.1 Hz to 10 Hz 5
Open-loop voltage gain AOL 135 dB (V-) + 0.1 V ≤ VO ≤ (V+), 0.1 V, RL = 100 kΩ to VS / 2 5
Gain-bandwidth product GBW 8 kHz CL = 20 pF, RL = 10 MΩ 5
Slew rate SR 3.3 V/ms G = +1, CL = 20 pF 5
Supply voltage VS 1.7 3.6 V VS = (V+) - (V-) 4
Specified temperature -40 125 °C 4
Supply voltage VS -0.3 4 V VS = (V+) - (V-) 4
Input/Output pin voltage -0.3 0.3 V relative to (V-) and (V+): (V-) - 0.3 to (V+) + 0.3 4
Differential input voltage -0.3 0.3 V +IN - (-IN) 4
Signal input terminal current -10 10 mA 4
Junction temperature TJ 150 °C 4
Operating ambient temperature TA -40 125 °C 4
Storage temperature Tstg -65 150 °C 4
ESD HBM V(ESD) -2000 2000 V per ANSI/ESDA/JEDEC JS-001 4
ESD CDM V(ESD) -750 750 V per JESD22-C101 4
Junction-to-ambient thermal resistance RθJA 218.4 °C/W DBV (SOT), 5 pins 4
Junction-to-case (top) thermal resistance RθJC(top) 101.3 °C/W 4
Junction-to-board thermal resistance RθJB 52.9 °C/W 4

CAD (land: KiCad; 3D: generated from the datasheet)

  • Symbol: LPV821DBVR
  • Footprint: Package_TO_SOT_SMD:SOT-23-5
  • 3D model: SOT-23-5, generated on the KiCad land (body 1.6 x 2.9 mm, terminals on the pads, 1.175 mm tall, datasheet A, midpoint of min and max). KiCad's stock model for this land is taller than the datasheet allows, so the model is generated from the datasheet drawing; the dimensions come from the datasheet drawing where it was read and are defaults otherwise (see provenance.model_3d_generated), not the manufacturer's CAD (STEP)
  • 3D model files: lpv821dbvr-etched.step / lpv821dbvr-etched.glb carry the MPN laser-etched on the die in a toggleable Adom.LaserEtch group (Fusion-ready); lpv821dbvr.step / lpv821dbvr.glb are the bare package body.

Provenance

Data extracted from the manufacturer datasheet, not a distributor listing:

  • Datasheet: Texas Instruments datasheet (25 pp, sha256 72e3344cc62bbc66, retrieved 2026-11-13, tier: manufacturer)
  • Extractor: parts-factory 2.0.0 / extract_pins 0.3, primary claude-sonnet-5-5 (text), consensus claude-sonnet-5-5 (agreed), guards: pin_guards 0.1: passed. Pins are checked against the footprint pad set and their cited datasheet pages before publish.
  • CAD: land: KiCad official libraries (CC-BY-SA 4.0); 3D: generated from the datasheet's package dimensions (provenance.model_3d_generated).

Datasheet PDF