3D Model
Open in new tab ↗
Loads when you scroll to it. Unloads after 5 minutes in the background.
Symbol & Footprint
Schematic Symbol
Open full view ↗Loads when you scroll to it. Unloads after 5 minutes in the background.
PCB Footprint
Open full view ↗Loads when you scroll to it. Unloads after 5 minutes in the background.
Datasheet
Open in new tab ↗Loads when you scroll to it. Unloads after 5 minutes in the background.
Contents
README
markdownLPV821DBVR
Texas Instruments · Precision OpAmps · SOT-23-5
LPV821DBVR from Texas Instruments, in a SOT-23-5. Pinout and pin descriptions extracted from the manufacturer datasheet (extract_pins, cross-checked by a second model). Symbol and footprint from KiCad-official CAD; the 3D model is generated from the datasheet's package dimensions.
Pinout
| Pin | Name | Type | Function |
|---|---|---|---|
| 1 | OUT | output | Amplifier output, rail-to-rail swinging within 12 mV of the supply rails. |
| 2 | V- | power_in | Negative (lowest) power supply; supply span VS = (V+) - (V-) is 1.7 V to 3.6 V. |
| 3 | +IN | input | Non-inverting input with rail-to-rail common-mode range; limit input current to 10 mA if it exceeds the supply rails by more than 0.3 V. |
| 4 | -IN | input | Inverting input with rail-to-rail common-mode range; limit input current to 10 mA if it exceeds the supply rails by more than 0.3 V. |
| 5 | V+ | power_in | Positive (highest) power supply; operates from 1.7 V to 3.6 V above V- (absolute maximum 4 V). |
Key specifications
| Parameter | Value |
|---|---|
| Manufacturer | Texas Instruments |
| Package | SOT-23-5 |
| Category | Amplifiers |
| Pins | 5 |
Electrical characteristics
Limits as printed in the datasheet (page.json metadata.characteristics carries them as data).
| Parameter | Symbol | Min | Typ | Max | Unit | Conditions | Page |
|---|---|---|---|---|---|---|---|
| Input offset voltage | VOS | -10 | 1.5 | 10 | μV | VS = 3.3 V | 5 |
| Input offset voltage drift | dVOS/dT | -0.096 | 0.02 | 0.096 | μV/°C | TA = -40°C to 125°C, VS = 3.3 V | 5 |
| Power-supply rejection ratio | PSRR | 0.4 | 4.5 | μV/V | VS = 1.8 V to 3.3 V | 5 | |
| Common-mode rejection ratio | CMRR | 100 | 125 | dB | (V-) ≤ VCM ≤ (V+), VS = 3.3 V | 5 | |
| Quiescent current per channel | IQ | 650 | 790 | nA | VCM = VS/2, IO = 0, VS = 3.3 V | 5 | |
| Input bias current +IN | IB | 7 | pA | TA= 25°C | 5 | ||
| Input offset current | IOS | 14 | pA | 5 | |||
| Input voltage noise | En | 3.9 | μVPP | f = 0.1 Hz to 10 Hz | 5 | ||
| Open-loop voltage gain | AOL | 135 | dB | (V-) + 0.1 V ≤ VO ≤ (V+), 0.1 V, RL = 100 kΩ to VS / 2 | 5 | ||
| Gain-bandwidth product | GBW | 8 | kHz | CL = 20 pF, RL = 10 MΩ | 5 | ||
| Slew rate | SR | 3.3 | V/ms | G = +1, CL = 20 pF | 5 | ||
| Supply voltage | VS | 1.7 | 3.6 | V | VS = (V+) - (V-) | 4 | |
| Specified temperature | -40 | 125 | °C | 4 | |||
| Supply voltage | VS | -0.3 | 4 | V | VS = (V+) - (V-) | 4 | |
| Input/Output pin voltage | -0.3 | 0.3 | V | relative to (V-) and (V+): (V-) - 0.3 to (V+) + 0.3 | 4 | ||
| Differential input voltage | -0.3 | 0.3 | V | +IN - (-IN) | 4 | ||
| Signal input terminal current | -10 | 10 | mA | 4 | |||
| Junction temperature | TJ | 150 | °C | 4 | |||
| Operating ambient temperature | TA | -40 | 125 | °C | 4 | ||
| Storage temperature | Tstg | -65 | 150 | °C | 4 | ||
| ESD HBM | V(ESD) | -2000 | 2000 | V | per ANSI/ESDA/JEDEC JS-001 | 4 | |
| ESD CDM | V(ESD) | -750 | 750 | V | per JESD22-C101 | 4 | |
| Junction-to-ambient thermal resistance | RθJA | 218.4 | °C/W | DBV (SOT), 5 pins | 4 | ||
| Junction-to-case (top) thermal resistance | RθJC(top) | 101.3 | °C/W | 4 | |||
| Junction-to-board thermal resistance | RθJB | 52.9 | °C/W | 4 |
CAD (land: KiCad; 3D: generated from the datasheet)
- Symbol:
LPV821DBVR - Footprint:
Package_TO_SOT_SMD:SOT-23-5 - 3D model: SOT-23-5, generated on the KiCad land (body 1.6 x 2.9 mm, terminals on the pads, 1.175 mm tall, datasheet A, midpoint of min and max). KiCad's stock model for this land is taller than the datasheet allows, so the model is generated from the datasheet drawing; the dimensions come from the datasheet drawing where it was read and are defaults otherwise (see provenance.model_3d_generated), not the manufacturer's CAD (STEP)
- 3D model files:
lpv821dbvr-etched.step/lpv821dbvr-etched.glbcarry the MPN laser-etched on the die in a toggleableAdom.LaserEtchgroup (Fusion-ready);lpv821dbvr.step/lpv821dbvr.glbare the bare package body.
Provenance
Data extracted from the manufacturer datasheet, not a distributor listing:
- Datasheet: Texas Instruments datasheet (25 pp, sha256
72e3344cc62bbc66, retrieved 2026-11-13, tier: manufacturer) - Extractor: parts-factory
2.0.0/extract_pins 0.3, primaryclaude-sonnet-5-5(text), consensusclaude-sonnet-5-5(agreed), guards: pin_guards 0.1: passed. Pins are checked against the footprint pad set and their cited datasheet pages before publish. - CAD: land: KiCad official libraries (CC-BY-SA 4.0); 3D: generated from the datasheet's package dimensions (provenance.model_3d_generated).