3D Model
Open in new tab ↗
Loads when you scroll to it. Unloads after 5 minutes in the background.
Symbol & Footprint
Schematic Symbol
Open full view ↗Loads when you scroll to it. Unloads after 5 minutes in the background.
PCB Footprint
Open full view ↗Loads when you scroll to it. Unloads after 5 minutes in the background.
Datasheet
Open in new tab ↗Loads when you scroll to it. Unloads after 5 minutes in the background.
README
markdownREF5040MDREP
Texas Instruments · Voltage Reference · SOIC-8
REF5040MDREP from Texas Instruments, in a SOIC-8. Pinout and pin descriptions extracted from the manufacturer datasheet (extract_pins, cross-checked by a second model); symbol, footprint, and 3D from KiCad-official CAD.
Pinout
| Pin | Name | Type | Function |
|---|---|---|---|
| 1 | DNC | unconnected | Do not connect. |
| 2 | VIN | power_in | Power supply input ranging from VOUT + 0.2 V to 18 V maximum with recommended bypass capacitor 1 µF to 10 µF. |
| 3 | TEMP | output | Temperature monitoring output provides chip temperature-dependent voltage with approximately 60 kΩ source impedance. |
| 4 | GND | power_in | System ground. |
| 5 | TRIM/NR | input | Trim and noise reduction input for output voltage adjustment; connecting 1 µF capacitor creates low-pass filter at bandgap reducing output noise. |
| 6 | VOUT | output | Factory-trimmed reference voltage output nominally 4.096 V with recommended load capacitor 1 µF to 50 µF, ESR 1 to 1.5 Ω. |
| 7 | NC | unconnected | No internal connection. |
| 8 | DNC | unconnected | Do not connect. |
Key specifications
| Parameter | Value |
|---|---|
| Manufacturer | Texas Instruments |
| Package | SOIC-8 |
| Category | Power Management (PMIC) |
| Pins | 8 |
Electrical characteristics
Limits as printed in the datasheet (page.json metadata.characteristics carries them as data).
| Parameter | Symbol | Min | Typ | Max | Unit | Conditions | Page |
|---|---|---|---|---|---|---|---|
| Initial accuracy (output voltage) | -0.05 | 0.05 | % | TA = 25°C | 4 | ||
| Over temperature accuracy (output voltage) | -0.08 | 0.08 | % | TA = –55°C to 125°C | 4 | ||
| Output voltage temperature drift | dVOUT/dT | 3 | 5 | ppm/°C | All other devices | 5 | |
| Line regulation | dVOUT/dVIN | 0.1 | 1 | ppm/V | VIN = VOUT + 0.2 V | 5 | |
| Line regulation over temperature | dVOUT/dVIN | 1 | 3 | ppm/V | Over Temperature | 5 | |
| Load regulation | dVOUT/dILOAD | 20 | 30 | ppm/mA | –10 mA < ILOAD < +10 mA, VIN = VOUT + 0.75 V | 5 | |
| Load regulation over temperature | dVOUT/dILOAD | 60 | ppm/mA | Over Temperature | 5 | ||
| Quiescent current | 0.8 | 1 | mA | 5 | |||
| Quiescent current over temperature | 1.25 | mA | Over Temperature | 5 | |||
| Supply voltage | VIN | 18 | V | See Note (1) | 5 | ||
| Specified temperature range | -55 | 125 | °C | 5 | |||
| Operating temperature range | -55 | 125 | °C | 5 | |||
| Input voltage | VIN | 18 | V | 3 | |||
| Output short-circuit | 30 | mA | 3 | ||||
| Operating temperature | -55 | 125 | °C | 3 | |||
| Junction temperature | TJ | 150 | °C | 3 | |||
| Storage temperature | Tstg | -65 | 150 | °C | 3 | ||
| Input voltage operating | VIN | 18 | V | Minimum is VOUT + 0.2 V | 4 | ||
| Output current | IOUT | -10 | 10 | mA | 4 | ||
| Junction-to-ambient thermal resistance | RθJA | 97.1 | °C/W | D (SOIC) package | 4 | ||
| Junction-to-case (top) thermal resistance | RθJC(top) | 42.2 | °C/W | D (SOIC) package | 4 | ||
| Junction-to-board thermal resistance | RθJB | 34.6 | °C/W | D (SOIC) package | 4 | ||
| Thermal resistance (electrical table) | θJA | 150 | °C/W | 5 | |||
| Output voltage | VOUT | 4.096 | V | 4 | |||
| Output voltage noise | 12 | μVPP | f = 0.1 Hz to 10 Hz | 4 | |||
| Short-circuit current | ISC | 25 | mA | VOUT = 0 | 5 | ||
| TEMP pin voltage output | 575 | mV | At TA = 25°C | 5 | |||
| TEMP pin temperature sensitivity | 2.64 | mV/°C | 5 | ||||
| Turnon settling time | 200 | μs | To 0.1% with CL = 1 μF | 5 |
CAD (KiCad official)
- Symbol:
REF5040MDREP - Footprint:
Package_SO:SOIC-8_3.9x4.9mm_P1.27mm - 3D model: SOIC-8 (KiCad packages3D, STEP)
- 3D model files:
ref5040mdrep-etched.step/ref5040mdrep-etched.glbcarry the MPN laser-etched on the die in a toggleableAdom.LaserEtchgroup (Fusion-ready);ref5040mdrep.step/ref5040mdrep.glbare the bare package body.
Provenance
Data extracted from the manufacturer datasheet, not a distributor listing:
- Datasheet: Texas Instruments datasheet (30 pp, sha256
57d711031fe8f29e, retrieved 2026-10-07, tier: lcsc) - Extractor: parts-factory
2.0.0/extract_pins 0.3, primaryclaude-haiku-4-5-20251001(text), consensusclaude-sonnet-5-5(agreed), guards: pin_guards 0.1: passed. Pins are checked against the footprint pad set and their cited datasheet pages before publish. - CAD: KiCad official libraries (CC-BY-SA 4.0).