Loads when you scroll to it. Unloads after 5 minutes in the background.

Symbol & Footprint

Schematic Symbol

Open full view ↗
Loads when you scroll to it. Unloads after 5 minutes in the background.

PCB Footprint

Open full view ↗
Loads when you scroll to it. Unloads after 5 minutes in the background.
Loads when you scroll to it. Unloads after 5 minutes in the background.
Download PDF
Contents

README

markdown

REF5040MDREP

Texas Instruments · Voltage Reference · SOIC-8

REF5040MDREP from Texas Instruments, in a SOIC-8. Pinout and pin descriptions extracted from the manufacturer datasheet (extract_pins, cross-checked by a second model); symbol, footprint, and 3D from KiCad-official CAD.

Pinout

Pin Name Type Function
1 DNC unconnected Do not connect.
2 VIN power_in Power supply input ranging from VOUT + 0.2 V to 18 V maximum with recommended bypass capacitor 1 µF to 10 µF.
3 TEMP output Temperature monitoring output provides chip temperature-dependent voltage with approximately 60 kΩ source impedance.
4 GND power_in System ground.
5 TRIM/NR input Trim and noise reduction input for output voltage adjustment; connecting 1 µF capacitor creates low-pass filter at bandgap reducing output noise.
6 VOUT output Factory-trimmed reference voltage output nominally 4.096 V with recommended load capacitor 1 µF to 50 µF, ESR 1 to 1.5 Ω.
7 NC unconnected No internal connection.
8 DNC unconnected Do not connect.

Key specifications

Parameter Value
Manufacturer Texas Instruments
Package SOIC-8
Category Power Management (PMIC)
Pins 8

Electrical characteristics

Limits as printed in the datasheet (page.json metadata.characteristics carries them as data).

Parameter Symbol Min Typ Max Unit Conditions Page
Initial accuracy (output voltage) -0.05 0.05 % TA = 25°C 4
Over temperature accuracy (output voltage) -0.08 0.08 % TA = –55°C to 125°C 4
Output voltage temperature drift dVOUT/dT 3 5 ppm/°C All other devices 5
Line regulation dVOUT/dVIN 0.1 1 ppm/V VIN = VOUT + 0.2 V 5
Line regulation over temperature dVOUT/dVIN 1 3 ppm/V Over Temperature 5
Load regulation dVOUT/dILOAD 20 30 ppm/mA –10 mA < ILOAD < +10 mA, VIN = VOUT + 0.75 V 5
Load regulation over temperature dVOUT/dILOAD 60 ppm/mA Over Temperature 5
Quiescent current 0.8 1 mA 5
Quiescent current over temperature 1.25 mA Over Temperature 5
Supply voltage VIN 18 V See Note (1) 5
Specified temperature range -55 125 °C 5
Operating temperature range -55 125 °C 5
Input voltage VIN 18 V 3
Output short-circuit 30 mA 3
Operating temperature -55 125 °C 3
Junction temperature TJ 150 °C 3
Storage temperature Tstg -65 150 °C 3
Input voltage operating VIN 18 V Minimum is VOUT + 0.2 V 4
Output current IOUT -10 10 mA 4
Junction-to-ambient thermal resistance RθJA 97.1 °C/W D (SOIC) package 4
Junction-to-case (top) thermal resistance RθJC(top) 42.2 °C/W D (SOIC) package 4
Junction-to-board thermal resistance RθJB 34.6 °C/W D (SOIC) package 4
Thermal resistance (electrical table) θJA 150 °C/W 5
Output voltage VOUT 4.096 V 4
Output voltage noise 12 μVPP f = 0.1 Hz to 10 Hz 4
Short-circuit current ISC 25 mA VOUT = 0 5
TEMP pin voltage output 575 mV At TA = 25°C 5
TEMP pin temperature sensitivity 2.64 mV/°C 5
Turnon settling time 200 μs To 0.1% with CL = 1 μF 5

CAD (KiCad official)

  • Symbol: REF5040MDREP
  • Footprint: Package_SO:SOIC-8_3.9x4.9mm_P1.27mm
  • 3D model: SOIC-8 (KiCad packages3D, STEP)
  • 3D model files: ref5040mdrep-etched.step / ref5040mdrep-etched.glb carry the MPN laser-etched on the die in a toggleable Adom.LaserEtch group (Fusion-ready); ref5040mdrep.step / ref5040mdrep.glb are the bare package body.

Provenance

Data extracted from the manufacturer datasheet, not a distributor listing:

  • Datasheet: Texas Instruments datasheet (30 pp, sha256 57d711031fe8f29e, retrieved 2026-10-07, tier: lcsc)
  • Extractor: parts-factory 2.0.0 / extract_pins 0.3, primary claude-haiku-4-5-20251001 (text), consensus claude-sonnet-5-5 (agreed), guards: pin_guards 0.1: passed. Pins are checked against the footprint pad set and their cited datasheet pages before publish.
  • CAD: KiCad official libraries (CC-BY-SA 4.0).

Datasheet PDF