Loads when you scroll to it. Unloads after 5 minutes in the background.

Symbol & Footprint

Schematic Symbol

Open full view ↗
Loads when you scroll to it. Unloads after 5 minutes in the background.

PCB Footprint

Open full view ↗
Loads when you scroll to it. Unloads after 5 minutes in the background.
Loads when you scroll to it. Unloads after 5 minutes in the background.
Download PDF
Contents

README

markdown

IBSP3032F050ST5AR00

Inbisen · Linear Voltage Regulators (LDO) · SOT23-5

IBSP3032F050ST5AR00 from Inbisen, in a SOT23-5. Pinout and pin descriptions extracted from the manufacturer datasheet (extract_pins, cross-checked by a second model). Symbol, footprint, and 3D from KiCad-official CAD.

Pinout

Pin Name Type Function
1 IN power_in Regulator input supply, which must be bypassed to GND with 2.2 uF or a larger capacitor; the input range is 2.7 V to 20 V.
2 GND power_in Ground reference for the regulator.
3 NC unconnected No-connect pin on this bond variant, left as an empty pin.
4 ADJ input Feedback sense input connected to the load; an external resistor divider can set the output above the fixed voltage, and ADJ to GND is rated -0.3 V to +5.5 V.
5 OUT power_out Regulator output, which must be bypassed to GND with 2.2 uF or a larger capacitor; output is adjustable from 1.2 V up to VIN - VDO.

Key specifications

Parameter Value
Manufacturer Inbisen
Package SOT23-5
Category Power Management
Pins 5

Electrical characteristics

Limits as printed in the datasheet (page.json metadata.characteristics carries them as data).

Parameter Symbol Min Typ Max Unit Conditions Page
Input voltage range VIN 2.7 20 V 2
Output voltage accuracy VOUT -1 1 % 2
Absolute max VIN to GND -20 20 V VIN to GND 11
Absolute max VOUT to GND VOUT -0.3 V VOUT to GND; upper limit printed as VIN 11
Absolute max EN to GND EN -0.3 V EN to GND; upper limit printed as VIN 11
Absolute max ADJ to GND ADJ -0.3 5.5 V ADJ to GND 11
Storage temperature range -65 150 °C 11
Junction temperature TJ 150 °C 11
Operating ambient temperature range TA -40 125 °C 11
Operating supply current IGND 40 uA IOUT = 0uA 2
Operating supply current IGND 140 uA IOUT = 10mA 2
Operating supply current IGND 1 mA IOUT = 300mA 2
Shutdown current IGND-SD 1.2 uA EN=GND 2
Line regulation ΔVOUT/ΔVIN 0.002 %/V VIN =(VOUT+1V) to 20V 2
Load regulation ΔVOUT/ΔIOUT 0.002 %/mA IOUT = 100uA to 300mA 2
Dropout voltage VDROPOUT 67 mV IOUT = 50mA 2
Dropout voltage VDROPOUT 203 mV IOUT = 150mA 2
Dropout voltage VDROPOUT 450 mV IOUT = 300mA 2
Startup time tSTART-UP 380 us 2
Current limit threshold ILIMIT 480 mA 3
Thermal shutdown threshold TSSD 150 °C TJ rising 3
Thermal shutdown hysteresis TSSD-HYS 15 °C 3
UVLO rising input threshold UVLORISE 2.5 V 3
UVLO falling input threshold UVLOFALL 2.2 V 3
UVLO hysteresis UVLOHTS 300 mV 3
Precision EN input high threshold ENHIGH 1.2 V 2.7V ≤ VIN ≤ 20V 3
Precision EN input low threshold ENLOW 1.1 V 2.7V ≤ VIN ≤ 20V 3
Precision EN logic hysteresis ENHYS 100 mV 2.7V ≤ VIN ≤ 20V 3
EN turn-on delay time tEN-DLY 80 us EN rising from 0V to VIN to 0.1×VOUT 3
Output noise OUTNOISE 10 uVrms 10Hz to 100kHz 3
Power supply rejection ratio PSRR 58 dB 1MHz, VIN = 7V, VOUT = 5V 3
Power supply rejection ratio PSRR 62 dB 100kHz, VIN = 7V, VOUT = 5V 3
Power supply rejection ratio PSRR 91 dB 10kHz, VIN = 7V, VOUT = 5V 3
Power supply rejection ratio PSRR 105 dB 10Hz, VIN = 7V, VOUT = 5V 3
Junction-to-ambient thermal resistance θJA 182 °C/W SOT23-5 package 12
Junction-to-case thermal resistance θJC 70 °C/W SOT23-5 package 12

CAD (KiCad official)

  • Symbol: IBSP3032F050ST5AR00
  • Footprint: Package_TO_SOT_SMD:SOT-23-5
  • 3D model: SOT23-5, generated from the KiCad footprint (body from the F.Fab outline, terminals on the pads, 1.25 mm tall, datasheet A, max). Neither the vendor nor KiCad ships a 3D model for this package, so the dimensions come from the datasheet drawing where it was read and are defaults otherwise (see provenance.model_3d_generated), not the manufacturer's CAD (STEP)
  • 3D model files: ibsp3032f050st5ar00-etched.step / ibsp3032f050st5ar00-etched.glb carry the MPN laser-etched on the die in a toggleable Adom.LaserEtch group (Fusion-ready); ibsp3032f050st5ar00.step / ibsp3032f050st5ar00.glb are the bare package body.

Provenance

Data extracted from the manufacturer datasheet, not a distributor listing:

  • Datasheet: Inbisen datasheet (16 pp, sha256 75616965beb23546, retrieved 2026-11-12, tier: lcsc)
  • Datasheet language: Chinese. Pin names, descriptions, and specs on this page were extracted and translated to English by ds2sf; the linked PDF is the manufacturer original.
  • Extractor: parts-factory 2.0.0 / extract_pins 0.3, primary claude-haiku-5-5 (text), consensus claude-sonnet-5-5 (agreed), guards: pin_guards 0.1: passed. Pins are checked against the footprint pad set and their cited datasheet pages before publish.
  • CAD: KiCad official libraries (CC-BY-SA 4.0).

Datasheet PDF