Generated by kicad-footprint-generator · KiCad file format 20260206
IBSP3032F050ST5AR00
Inbisen · Linear Voltage Regulators (LDO) · SOT23-5
IBSP3032F050ST5AR00 from Inbisen, in a SOT23-5. Pinout and pin descriptions extracted from the manufacturer datasheet (extract_pins, cross-checked by a second model). Symbol, footprint, and 3D from KiCad-official CAD.
Pinout
| Pin | Name | Type | Function |
|---|---|---|---|
| 1 | IN | power_in | Regulator input supply, which must be bypassed to GND with 2.2 uF or a larger capacitor; the input range is 2.7 V to 20 V. |
| 2 | GND | power_in | Ground reference for the regulator. |
| 3 | NC | unconnected | No-connect pin on this bond variant, left as an empty pin. |
| 4 | ADJ | input | Feedback sense input connected to the load; an external resistor divider can set the output above the fixed voltage, and ADJ to GND is rated -0.3 V to +5.5 V. |
| 5 | OUT | power_out | Regulator output, which must be bypassed to GND with 2.2 uF or a larger capacitor; output is adjustable from 1.2 V up to VIN - VDO. |
Key specifications
| Parameter | Value |
|---|---|
| Manufacturer | Inbisen |
| Package | SOT23-5 |
| Category | Power Management |
| Pins | 5 |
Electrical characteristics
Limits as printed in the datasheet (page.json metadata.characteristics carries them as data).
| Parameter | Symbol | Min | Typ | Max | Unit | Conditions | Page |
|---|---|---|---|---|---|---|---|
| Input voltage range | VIN | 2.7 | 20 | V | 2 | ||
| Output voltage accuracy | VOUT | -1 | 1 | % | 2 | ||
| Absolute max VIN to GND | -20 | 20 | V | VIN to GND | 11 | ||
| Absolute max VOUT to GND | VOUT | -0.3 | V | VOUT to GND; upper limit printed as VIN | 11 | ||
| Absolute max EN to GND | EN | -0.3 | V | EN to GND; upper limit printed as VIN | 11 | ||
| Absolute max ADJ to GND | ADJ | -0.3 | 5.5 | V | ADJ to GND | 11 | |
| Storage temperature range | -65 | 150 | °C | 11 | |||
| Junction temperature | TJ | 150 | °C | 11 | |||
| Operating ambient temperature range | TA | -40 | 125 | °C | 11 | ||
| Operating supply current | IGND | 40 | uA | IOUT = 0uA | 2 | ||
| Operating supply current | IGND | 140 | uA | IOUT = 10mA | 2 | ||
| Operating supply current | IGND | 1 | mA | IOUT = 300mA | 2 | ||
| Shutdown current | IGND-SD | 1.2 | uA | EN=GND | 2 | ||
| Line regulation | ΔVOUT/ΔVIN | 0.002 | %/V | VIN =(VOUT+1V) to 20V | 2 | ||
| Load regulation | ΔVOUT/ΔIOUT | 0.002 | %/mA | IOUT = 100uA to 300mA | 2 | ||
| Dropout voltage | VDROPOUT | 67 | mV | IOUT = 50mA | 2 | ||
| Dropout voltage | VDROPOUT | 203 | mV | IOUT = 150mA | 2 | ||
| Dropout voltage | VDROPOUT | 450 | mV | IOUT = 300mA | 2 | ||
| Startup time | tSTART-UP | 380 | us | 2 | |||
| Current limit threshold | ILIMIT | 480 | mA | 3 | |||
| Thermal shutdown threshold | TSSD | 150 | °C | TJ rising | 3 | ||
| Thermal shutdown hysteresis | TSSD-HYS | 15 | °C | 3 | |||
| UVLO rising input threshold | UVLORISE | 2.5 | V | 3 | |||
| UVLO falling input threshold | UVLOFALL | 2.2 | V | 3 | |||
| UVLO hysteresis | UVLOHTS | 300 | mV | 3 | |||
| Precision EN input high threshold | ENHIGH | 1.2 | V | 2.7V ≤ VIN ≤ 20V | 3 | ||
| Precision EN input low threshold | ENLOW | 1.1 | V | 2.7V ≤ VIN ≤ 20V | 3 | ||
| Precision EN logic hysteresis | ENHYS | 100 | mV | 2.7V ≤ VIN ≤ 20V | 3 | ||
| EN turn-on delay time | tEN-DLY | 80 | us | EN rising from 0V to VIN to 0.1×VOUT | 3 | ||
| Output noise | OUTNOISE | 10 | uVrms | 10Hz to 100kHz | 3 | ||
| Power supply rejection ratio | PSRR | 58 | dB | 1MHz, VIN = 7V, VOUT = 5V | 3 | ||
| Power supply rejection ratio | PSRR | 62 | dB | 100kHz, VIN = 7V, VOUT = 5V | 3 | ||
| Power supply rejection ratio | PSRR | 91 | dB | 10kHz, VIN = 7V, VOUT = 5V | 3 | ||
| Power supply rejection ratio | PSRR | 105 | dB | 10Hz, VIN = 7V, VOUT = 5V | 3 | ||
| Junction-to-ambient thermal resistance | θJA | 182 | °C/W | SOT23-5 package | 12 | ||
| Junction-to-case thermal resistance | θJC | 70 | °C/W | SOT23-5 package | 12 |
CAD (KiCad official)
- Symbol:
IBSP3032F050ST5AR00 - Footprint:
Package_TO_SOT_SMD:SOT-23-5 - 3D model: SOT23-5, generated from the KiCad footprint (body from the F.Fab outline, terminals on the pads, 1.25 mm tall, datasheet A, max). Neither the vendor nor KiCad ships a 3D model for this package, so the dimensions come from the datasheet drawing where it was read and are defaults otherwise (see provenance.model_3d_generated), not the manufacturer's CAD (STEP)
- 3D model files:
ibsp3032f050st5ar00-etched.step/ibsp3032f050st5ar00-etched.glbcarry the MPN laser-etched on the die in a toggleableAdom.LaserEtchgroup (Fusion-ready);ibsp3032f050st5ar00.step/ibsp3032f050st5ar00.glbare the bare package body.
Provenance
Data extracted from the manufacturer datasheet, not a distributor listing:
- Datasheet: Inbisen datasheet (16 pp, sha256
75616965beb23546, retrieved 2026-11-12, tier: lcsc) - Datasheet language: Chinese. Pin names, descriptions, and specs on this page were extracted and translated to English by ds2sf; the linked PDF is the manufacturer original.
- Extractor: parts-factory
2.0.0/extract_pins 0.3, primaryclaude-haiku-5-5(text), consensusclaude-sonnet-5-5(agreed), guards: pin_guards 0.1: passed. Pins are checked against the footprint pad set and their cited datasheet pages before publish. - CAD: KiCad official libraries (CC-BY-SA 4.0).