3D Model
Open in new tab ↗
Loads when you scroll to it. Unloads after 5 minutes in the background.
Symbol & Footprint
Schematic Symbol
Open full view ↗Loads when you scroll to it. Unloads after 5 minutes in the background.
PCB Footprint
Open full view ↗Loads when you scroll to it. Unloads after 5 minutes in the background.
Datasheet
Open in new tab ↗Loads when you scroll to it. Unloads after 5 minutes in the background.
README
markdownPMC131-S14
PADAUK Tech · Microcontroller Units (MCUs/MPUs/SOCs) · SOP-14
PMC131-S14 from PADAUK Tech, in a SOP-14. Pinout and pin descriptions extracted from the manufacturer datasheet (extract_pins, cross-checked by a second model); symbol, footprint, and 3D from KiCad-official CAD.
Pinout
| Pin | Name | Type | Function |
|---|---|---|---|
| 1 | VDD | power_in | Positive supply; operating voltage 2.2V to 5.5V. |
| 2 | PA7/X1 | bidirectional | Port A bit 7 digital I/O with weak pull-up, or crystal oscillator X1; set padier bit 7 to 0 when used as crystal pin to reduce leakage. |
| 3 | PA6/X2 | bidirectional | Port A bit 6 digital I/O with weak pull-up, or crystal oscillator X2; set padier bit 6 to 0 when used as crystal pin to reduce leakage. |
| 4 | PB7/AD7/PWM2 | bidirectional | Port B bit 7 digital I/O with weak pull-up, ADC analog input channel 7, or Timer3 PWM output (named PWM2 in pin diagram); clear pbdier bit 7 when used as analog input. |
| 5 | PB4/AD4/PWM1 | bidirectional | Port B bit 4 digital I/O with weak pull-up, ADC analog input channel 4, or Timer2 PWM output; clear pbdier bit 4 when used as analog input. |
| 6 | PB5/AD5/INT0A/PWM2 | bidirectional | Port B bit 5 digital I/O with weak pull-up, ADC analog input channel 5, external interrupt (rising and falling edge), or Timer3 PWM output; clear pbdier bit 5 when used as analog input. |
| 7 | PA5/PRSTB | bidirectional | External hardware reset input or Port A bit 5 input/open-drain output with no pull-up resistor; can be a wake-up source; a 33 ohm series resistor is advised when used as input in high-noise systems. |
| 8 | PB0/AD0/INT1 | bidirectional | Port B bit 0 digital I/O with weak pull-up, ADC analog input channel 0, or external interrupt (rising and falling edge); clear pbdier bit 0 when used as analog input. |
| 9 | PB1/AD1/Vref | bidirectional | Port B bit 1 digital I/O with weak pull-up, ADC analog input channel 1, or ADC external reference high voltage; clear pbdier bit 1 when used as analog input. |
| 10 | PB3/AD3 | bidirectional | Port B bit 3 digital I/O with weak pull-up or ADC analog input channel 3; clear pbdier bit 3 when used as analog input. |
| 11 | PA3/AD8/PWM1 | bidirectional | Port A bit 3 digital I/O with weak pull-up, ADC analog input channel 8, or Timer2 PWM output; clear padier bit 3 when used as analog input. |
| 12 | PA4/AD9/INT1A | bidirectional | Port A bit 4 with weak pull-up (described as digital input), ADC analog input channel 9, or external interrupt (rising and falling edge); disabling digital input also disables wake-up. |
| 13 | PA0/AD10/INT0 | bidirectional | Port A bit 0 digital I/O with weak pull-up, ADC analog input channel 10, or external interrupt (rising and falling edge); clear padier bit 0 when used as analog input. |
| 14 | GND | power_in | Ground. |
Key specifications
| Parameter | Value |
|---|---|
| Manufacturer | PADAUK Tech |
| Package | SOP-14 |
| Category | Embedded Processors & Controllers |
| Pins | 14 |
Electrical characteristics
Limits as printed in the datasheet (page.json metadata.characteristics carries them as data).
| Parameter | Symbol | Min | Typ | Max | Unit | Conditions | Page |
|---|---|---|---|---|---|---|---|
| Operating voltage | VDD | 2.2 | 5 | 5.5 | V | 15 | |
| IO pin source (driver) current | IOH | -6 | -8 | -10 | mA | VDD =5.0V, VOH=4.5V | 15 |
| Input voltage | VIN | -0.3 | V | 15 | |||
| Input low voltage | VIL | 0 | V | 15 | |||
| Band-gap reference voltage (before calibration) | VBG | 1.11 | 1.2 | 1.29 | V | VDD=5V, 25°C | 15 |
| Band-gap reference voltage (calibrated) | VBG | 1.14 | 1.2 | 1.26 | V | VDD=2.2V~5.5V, -40°C<Ta<85°C | 15 |
| Band-gap reference voltage (calibrated) | VBG | 1.145 | 1.2 | 1.255 | V | VDD=2.2V~5.5V, -20°C<Ta<70°C | 15 |
| IHRC frequency (calibrated) | fIHRC | 15.76 | 16 | 16.24 | MHz | 25°C, VDD=2.2V~5.5V | 16 |
| IHRC frequency (calibrated) | fIHRC | 15.04 | 16 | 16.96 | MHz | VDD=2.2V~5.5V, -40°C<Ta<85°C | 16 |
| IHRC frequency (calibrated) | fIHRC | 15.2 | 16 | 16.8 | MHz | VDD=2.2V~5.5V, -20°C<Ta<70°C | 16 |
| ILRC frequency | fILRC | 31.3 | 37 | 41.9 | kHz | VDD=5.0V, Ta=25°C | 16 |
| ILRC frequency | fILRC | 24 | 37 | 50 | kHz | VDD=5.0V, -40°C<Ta<85°C | 16 |
| ILRC frequency | fILRC | 25.9 | 37 | 48.1 | kHz | VDD=5.0V, -20°C<Ta<70°C | 16 |
| ILRC frequency | fILRC | 18.3 | 21 | 24.5 | kHz | VDD=3.3V, Ta=25°C | 16 |
| ILRC frequency | fILRC | 14 | 21 | 29 | kHz | VDD=3.3V, -40°C<Ta<85°C | 16 |
| ILRC frequency | fILRC | 14.7 | 21 | 27.3 | kHz | VDD=3.3V, -20°C<Ta<70°C | 16 |
| AD input voltage | VAD | 0 | V | 16 | |||
| ADC differential non-linearity | AD DNL | -2 | 2 | LSB | 16 | ||
| ADC integral non-linearity | AD INL | -4 | 4 | LSB | 16 | ||
| ADC reference high voltage (4V setting) | VREFH | 3.9 | 4 | 4.1 | V | 4V setting, @VDD=5V | 16 |
| ADC reference high voltage (3V setting) | VREFH | 2.93 | 3 | 3.07 | V | 3V setting | 16 |
| ADC reference high voltage (2V setting) | VREFH | 1.95 | 2 | 2.05 | V | 2V setting | 16 |
CAD (KiCad official)
- Symbol:
PMC131-S14 - Footprint:
Package_SO:SOIC-14_3.9x8.7mm_P1.27mm - 3D model: SOP-14 (KiCad packages3D, STEP)
- 3D model files:
pmc131-s14-etched.step/pmc131-s14-etched.glbcarry the MPN laser-etched on the die in a toggleableAdom.LaserEtchgroup (Fusion-ready);pmc131-s14.step/pmc131-s14.glbare the bare package body.
Provenance
Data extracted from the manufacturer datasheet, not a distributor listing:
- Datasheet: PADAUK Tech datasheet (83 pp, sha256
6f929309fb216f31, retrieved 2026-10-29, tier: lcsc) - Datasheet language: Chinese. Pin names, descriptions, and specs on this page were extracted and translated to English by ds2sf; the linked PDF is the manufacturer original.
- Extractor: parts-factory
2.0.0/extract_pins 0.3, primaryclaude-haiku-5-5(text), consensusclaude-sonnet-5-5(agreed), guards: pin_guards 0.1: passed. Pins are checked against the footprint pad set and their cited datasheet pages before publish. - CAD: KiCad official libraries (CC-BY-SA 4.0).