Loads when you scroll to it. Unloads after 5 minutes in the background.

Symbol & Footprint

Schematic Symbol

Open full view ↗
Loads when you scroll to it. Unloads after 5 minutes in the background.

PCB Footprint

Open full view ↗
Loads when you scroll to it. Unloads after 5 minutes in the background.
Loads when you scroll to it. Unloads after 5 minutes in the background.
Download PDF
Contents

README

markdown

PMC131-S14

PADAUK Tech · Microcontroller Units (MCUs/MPUs/SOCs) · SOP-14

PMC131-S14 from PADAUK Tech, in a SOP-14. Pinout and pin descriptions extracted from the manufacturer datasheet (extract_pins, cross-checked by a second model); symbol, footprint, and 3D from KiCad-official CAD.

Pinout

Pin Name Type Function
1 VDD power_in Positive supply; operating voltage 2.2V to 5.5V.
2 PA7/X1 bidirectional Port A bit 7 digital I/O with weak pull-up, or crystal oscillator X1; set padier bit 7 to 0 when used as crystal pin to reduce leakage.
3 PA6/X2 bidirectional Port A bit 6 digital I/O with weak pull-up, or crystal oscillator X2; set padier bit 6 to 0 when used as crystal pin to reduce leakage.
4 PB7/AD7/PWM2 bidirectional Port B bit 7 digital I/O with weak pull-up, ADC analog input channel 7, or Timer3 PWM output (named PWM2 in pin diagram); clear pbdier bit 7 when used as analog input.
5 PB4/AD4/PWM1 bidirectional Port B bit 4 digital I/O with weak pull-up, ADC analog input channel 4, or Timer2 PWM output; clear pbdier bit 4 when used as analog input.
6 PB5/AD5/INT0A/PWM2 bidirectional Port B bit 5 digital I/O with weak pull-up, ADC analog input channel 5, external interrupt (rising and falling edge), or Timer3 PWM output; clear pbdier bit 5 when used as analog input.
7 PA5/PRSTB bidirectional External hardware reset input or Port A bit 5 input/open-drain output with no pull-up resistor; can be a wake-up source; a 33 ohm series resistor is advised when used as input in high-noise systems.
8 PB0/AD0/INT1 bidirectional Port B bit 0 digital I/O with weak pull-up, ADC analog input channel 0, or external interrupt (rising and falling edge); clear pbdier bit 0 when used as analog input.
9 PB1/AD1/Vref bidirectional Port B bit 1 digital I/O with weak pull-up, ADC analog input channel 1, or ADC external reference high voltage; clear pbdier bit 1 when used as analog input.
10 PB3/AD3 bidirectional Port B bit 3 digital I/O with weak pull-up or ADC analog input channel 3; clear pbdier bit 3 when used as analog input.
11 PA3/AD8/PWM1 bidirectional Port A bit 3 digital I/O with weak pull-up, ADC analog input channel 8, or Timer2 PWM output; clear padier bit 3 when used as analog input.
12 PA4/AD9/INT1A bidirectional Port A bit 4 with weak pull-up (described as digital input), ADC analog input channel 9, or external interrupt (rising and falling edge); disabling digital input also disables wake-up.
13 PA0/AD10/INT0 bidirectional Port A bit 0 digital I/O with weak pull-up, ADC analog input channel 10, or external interrupt (rising and falling edge); clear padier bit 0 when used as analog input.
14 GND power_in Ground.

Key specifications

Parameter Value
Manufacturer PADAUK Tech
Package SOP-14
Category Embedded Processors & Controllers
Pins 14

Electrical characteristics

Limits as printed in the datasheet (page.json metadata.characteristics carries them as data).

Parameter Symbol Min Typ Max Unit Conditions Page
Operating voltage VDD 2.2 5 5.5 V 15
IO pin source (driver) current IOH -6 -8 -10 mA VDD =5.0V, VOH=4.5V 15
Input voltage VIN -0.3 V 15
Input low voltage VIL 0 V 15
Band-gap reference voltage (before calibration) VBG 1.11 1.2 1.29 V VDD=5V, 25°C 15
Band-gap reference voltage (calibrated) VBG 1.14 1.2 1.26 V VDD=2.2V~5.5V, -40°C<Ta<85°C 15
Band-gap reference voltage (calibrated) VBG 1.145 1.2 1.255 V VDD=2.2V~5.5V, -20°C<Ta<70°C 15
IHRC frequency (calibrated) fIHRC 15.76 16 16.24 MHz 25°C, VDD=2.2V~5.5V 16
IHRC frequency (calibrated) fIHRC 15.04 16 16.96 MHz VDD=2.2V~5.5V, -40°C<Ta<85°C 16
IHRC frequency (calibrated) fIHRC 15.2 16 16.8 MHz VDD=2.2V~5.5V, -20°C<Ta<70°C 16
ILRC frequency fILRC 31.3 37 41.9 kHz VDD=5.0V, Ta=25°C 16
ILRC frequency fILRC 24 37 50 kHz VDD=5.0V, -40°C<Ta<85°C 16
ILRC frequency fILRC 25.9 37 48.1 kHz VDD=5.0V, -20°C<Ta<70°C 16
ILRC frequency fILRC 18.3 21 24.5 kHz VDD=3.3V, Ta=25°C 16
ILRC frequency fILRC 14 21 29 kHz VDD=3.3V, -40°C<Ta<85°C 16
ILRC frequency fILRC 14.7 21 27.3 kHz VDD=3.3V, -20°C<Ta<70°C 16
AD input voltage VAD 0 V 16
ADC differential non-linearity AD DNL -2 2 LSB 16
ADC integral non-linearity AD INL -4 4 LSB 16
ADC reference high voltage (4V setting) VREFH 3.9 4 4.1 V 4V setting, @VDD=5V 16
ADC reference high voltage (3V setting) VREFH 2.93 3 3.07 V 3V setting 16
ADC reference high voltage (2V setting) VREFH 1.95 2 2.05 V 2V setting 16

CAD (KiCad official)

  • Symbol: PMC131-S14
  • Footprint: Package_SO:SOIC-14_3.9x8.7mm_P1.27mm
  • 3D model: SOP-14 (KiCad packages3D, STEP)
  • 3D model files: pmc131-s14-etched.step / pmc131-s14-etched.glb carry the MPN laser-etched on the die in a toggleable Adom.LaserEtch group (Fusion-ready); pmc131-s14.step / pmc131-s14.glb are the bare package body.

Provenance

Data extracted from the manufacturer datasheet, not a distributor listing:

  • Datasheet: PADAUK Tech datasheet (83 pp, sha256 6f929309fb216f31, retrieved 2026-10-29, tier: lcsc)
  • Datasheet language: Chinese. Pin names, descriptions, and specs on this page were extracted and translated to English by ds2sf; the linked PDF is the manufacturer original.
  • Extractor: parts-factory 2.0.0 / extract_pins 0.3, primary claude-haiku-5-5 (text), consensus claude-sonnet-5-5 (agreed), guards: pin_guards 0.1: passed. Pins are checked against the footprint pad set and their cited datasheet pages before publish.
  • CAD: KiCad official libraries (CC-BY-SA 4.0).

Datasheet PDF