Loads when you scroll to it. Unloads after 5 minutes in the background.

Symbol & Footprint

Schematic Symbol

Open full view ↗
Loads when you scroll to it. Unloads after 5 minutes in the background.

PCB Footprint

Open full view ↗
Loads when you scroll to it. Unloads after 5 minutes in the background.
Loads when you scroll to it. Unloads after 5 minutes in the background.
Download PDF
Contents

README

markdown

TL16CP754CIPMR

Texas Instruments · UART · LQFP-64(10x10)

TL16CP754CIPMR from Texas Instruments, in a LQFP-64(10x10). Pinout and pin descriptions extracted from the manufacturer datasheet (extract_pins, cross-checked by a second model). Symbol, footprint, and 3D from KiCad-official CAD.

Pinout

Pin Name Type Function
24 A0 input Address bit 0 select for internal register addressing.
23 A1 input Address bit 1 select for internal register addressing.
22 A2 input Address bit 2 select for internal register addressing.
64 CDA input Active-low carrier detect input for UART channel A; low indicates the modem has detected a carrier.
18 CDB input Active-low carrier detect input for UART channel B; low indicates the modem has detected a carrier.
31 CDC input Active-low carrier detect input for UART channel C; low indicates the modem has detected a carrier.
49 CDD input Active-low carrier detect input for UART channel D; low indicates the modem has detected a carrier.
21 CLKSEL input Clock select; at reset VCC selects divide-by-1 prescaler and GND selects divide-by-4, latched (inverted) into MCR[7].
7 CSA input Active-low chip select for UART channel A enabling data transfers with the CPU.
11 CSB input Active-low chip select for UART channel B enabling data transfers with the CPU.
38 CSC input Active-low chip select for UART channel C enabling data transfers with the CPU.
42 CSD input Active-low chip select for UART channel D enabling data transfers with the CPU.
2 CTSA input Active-low clear to send for channel A; low indicates the modem is ready to accept data, status in MSR[4], gates transmit when auto-CTS (EFR[7]) is enabled.
16 CTSB input Active-low clear to send for channel B; low indicates the modem is ready to accept data, status in MSR[4], gates transmit when auto-CTS (EFR[7]) is enabled.
33 CTSC input Active-low clear to send for channel C; low indicates the modem is ready to accept data, status in MSR[4], gates transmit when auto-CTS (EFR[7]) is enabled.
47 CTSD input Active-low clear to send for channel D; low indicates the modem is ready to accept data, status in MSR[4], gates transmit when auto-CTS (EFR[7]) is enabled.
53 D0 bidirectional Bit 0 (LSB, first data bit in serial stream) of the 8-bit 3-state data bus to the CPU.
54 D1 bidirectional Bit 1 of the 8-bit 3-state data bus to the CPU.
55 D2 bidirectional Bit 2 of the 8-bit 3-state data bus to the CPU.
56 D3 bidirectional Bit 3 of the 8-bit 3-state data bus to the CPU.
57 D4 bidirectional Bit 4 of the 8-bit 3-state data bus to the CPU.
58 D5 bidirectional Bit 5 of the 8-bit 3-state data bus to the CPU.
59 D6 bidirectional Bit 6 of the 8-bit 3-state data bus to the CPU.
60 D7 bidirectional Bit 7 of the 8-bit 3-state data bus to the CPU.
1 DSRA input Active-low data set ready for channel A; low indicates the modem is powered on and ready for data exchange.
17 DSRB input Active-low data set ready for channel B; low indicates the modem is powered on and ready for data exchange.
32 DSRC input Active-low data set ready for channel C; low indicates the modem is powered on and ready for data exchange.
48 DSRD input Active-low data set ready for channel D; low indicates the modem is powered on and ready for data exchange.
3 DTRA output Active-low data terminal ready for channel A, set low by writing 1 to MCR[0], high after reset; can drive an external RS-485 driver.
15 DTRB output Active-low data terminal ready for channel B, set low by writing 1 to MCR[0], high after reset; can drive an external RS-485 driver.
34 DTRC output Active-low data terminal ready for channel C, set low by writing 1 to MCR[0], high after reset; can drive an external RS-485 driver.
46 DTRD output Active-low data terminal ready for channel D, set low by writing 1 to MCR[0], high after reset; can drive an external RS-485 driver.
14 GND power_in Power ground.
28 GND power_in Power ground.
45 GND power_in Power ground.
61 GND power_in Power ground.
6 INTA output Active-high interrupt output for channel A, enabled by MCR[3] and IER, high-impedance after reset.
12 INTB output Active-high interrupt output for channel B, enabled by MCR[3] and IER, high-impedance after reset.
37 INTC output Active-high interrupt output for channel C, enabled by MCR[3] and IER, high-impedance after reset.
43 INTD output Active-high interrupt output for channel D, enabled by MCR[3] and IER, high-impedance after reset.
40 IOR input Active-low read strobe that loads the register selected by A0-A2 onto the data bus D0-D7.
9 IOW input Active-low write strobe that transfers data bus D0-D7 into the register selected by A0-A2.
27 RESET input Active-high reset that resets internal registers and all outputs; transmitter output and receiver input are disabled during reset.
63 RIA input Active-low ring indicator for channel A; a low-to-high transition generates a modem status interrupt if enabled.
19 RIB input Active-low ring indicator for channel B; a low-to-high transition generates a modem status interrupt if enabled.
30 RIC input Active-low ring indicator for channel C; a low-to-high transition generates a modem status interrupt if enabled.
50 RID input Active-low ring indicator for channel D; a low-to-high transition generates a modem status interrupt if enabled.
5 RTSA output Active-low request to send for channel A, set low by writing 1 to MCR[1], high after reset; used for auto-RTS (EFR[6]) flow control.
13 RTSB output Active-low request to send for channel B, set low by writing 1 to MCR[1], high after reset; used for auto-RTS (EFR[6]) flow control.
36 RTSC output Active-low request to send for channel C, set low by writing 1 to MCR[1], high after reset; used for auto-RTS (EFR[6]) flow control.
44 RTSD output Active-low request to send for channel D, set low by writing 1 to MCR[1], high after reset; used for auto-RTS (EFR[6]) flow control.
62 RXA input Receive data input for channel A, held high when idle in normal mode and usable in IrDA mode.
20 RXB input Receive data input for channel B, held high when idle in normal mode and usable in IrDA mode.
29 RXC input Receive data input for channel C, held high when idle in normal mode and usable in IrDA mode.
51 RXD input Receive data input for channel D, held high when idle in normal mode and usable in IrDA mode.
8 TXA output Transmit data output for channel A, high when idle in normal mode and low when idle in IrDA mode.
10 TXB output Transmit data output for channel B, high when idle in normal mode and low when idle in IrDA mode.
39 TXC output Transmit data output for channel C, high when idle in normal mode and low when idle in IrDA mode.
41 TXD output Transmit data output for channel D, high when idle in normal mode and low when idle in IrDA mode.
4 VCC power_in Power supply input.
35 VCC power_in Power supply input.
52 VCC power_in Power supply input.
25 XTAL1 input Crystal input or external clock input for the internal oscillator.
26 XTAL2 output Crystal oscillator output or buffered clock output.

Key specifications

Parameter Value
Manufacturer Texas Instruments
Package LQFP-64(10x10)
Category Communication Interface Chip/UART/485/232
Pins 64

Electrical characteristics

Limits as printed in the datasheet (page.json metadata.characteristics carries them as data).

Parameter Symbol Min Typ Max Unit Conditions Page
Supply voltage range VCC -0.5 6 V 17
Input voltage range VI -0.5 V max VCC + 0.5 V 17
Output voltage range VO -0.5 V max VCC + 0.5 V 17
Operating free-air temperature range TA -40 85 °C TL16C754CI 17
Junction temperature TJ -40 105 °C TL16C754CI 17
Storage temperature range Tstg -65 150 °C 17
Junction-to-free-air thermal resistance θJA 73.1 °C/W Low K JEDEC test board, 1s, no air flow 17
Junction-to-case thermal resistance θJC 19 °C/W Cu cold plate measurement process 17
Junction-to-board thermal resistance θJB 28 °C/W EIA/JESD 51-8 17
Junction-to-top of package ΨJT 0.95 °C/W EIA/JESD 51-2 17
Junction-to-board ΨJB 25.8 °C/W EIA/JESD 51-6 17
Supply voltage VCC 1.62 1.8 1.98 V VCC = 1.8 V ±10% 17
High-level input voltage VIH 1.4 1.98 V VCC = 1.8 V ±10% 17
Low-level input voltage VIL -0.3 0.4 V VCC = 1.8 V ±10% 17
High-level output current IOH 0.5 mA All outputs, VCC = 1.8 V ±10% 17
Low-level output current IOL 1 mA All outputs, VCC = 1.8 V ±10% 17
Oscillator/clock speed 16 MHz VCC = 1.8 V ±10% 17
Supply voltage VCC 2.25 2.5 2.75 V VCC = 2.5 V ±10% 18
High-level input voltage VIH 1.8 2.75 V VCC = 2.5 V ±10% 18
Low-level input voltage VIL -0.3 0.6 V VCC = 2.5 V ±10% 18
High-level output current IOH 1 mA All outputs, VCC = 2.5 V ±10% 18
Low-level output current IOL 2 mA All outputs, VCC = 2.5 V ±10% 18
Oscillator/clock speed 24 MHz VCC = 2.5 V ±10% 18
Supply voltage VCC 3 3.3 3.6 V VCC = 3.3 V ±10% 18
High-level output current IOH 1.8 mA All outputs, VCC = 3.3 V ±10% 18
Low-level output current IOL 3.2 mA All outputs, VCC = 3.3 V ±10% 18
Oscillator/clock speed 32 MHz VCC = 3.3 V ±10% 18
Supply voltage VCC 5.5 V VCC = 5 V ±10% 18
High-level output current IOH 4 mA All outputs, VCC = 5 V ±10% 18
Low-level output current IOL 4 mA All outputs, VCC = 5 V ±10% 18
Oscillator/clock speed 48 MHz VCC = 5 V ±10% 18
High-level output voltage VOH 1.3 V VCC = 1.8 V, IOH = -0.5 mA 19
Low-level output voltage VOL 0.5 V VCC = 1.8 V, IOL = 1 mA 19
Input current II 10 μA VCC = 1.98 V, VSS = 0, VI = 0 to 1.98 V, All other terminals floating 19
High-impedance state output current IOZ -20 20 μA VCC = 1.98 V, VSS = 0, VO = 0 to 1.98 V, Chip selected in write mode or chip deselect 19
Supply current ICC 4 mA VCC = 1.98 V, TA = 0°C, XTAL1 at 16 MHz, No load on outputs, Baud rate = 1 Mbit/s 19
High-level output voltage VOH 1.8 V VCC = 2.5 V, IOH = -1 mA 19
Supply current ICC 6 mA VCC = 2.75 V, TA = 0°C, XTAL1 at 24 MHz, No load on outputs, Baud rate = 1.5 Mbit/s 19
High-level output voltage VOH 2.4 V VCC = 3.3 V, IOH = -1.8 mA 20
Low-level output voltage VOL 0.5 V VCC = 3.3 V, IOL = 3.2 mA 20
Input current II 10 μA VCC = 3.6 V, VSS = 0, VI = 0 to 3.6 V, All other terminals floating 20
High-impedance state output current IOZ -20 20 μA VCC = 3.6 V, VSS = 0, VO = 0 to 3.6 V, Chip selected in write mode or chip deselect 20
Supply current ICC 12 mA VCC = 3.6 V, TA = 0°C, XTAL1 at 32 MHz, No load on outputs, Baud rate = 2 Mbit/s 20
High-level output voltage VOH 4 V VCC = 5 V, IOH = -4 mA 20
Low-level output voltage VOL 0.4 V VCC = 5 V, IOL = 4 mA 20
Supply current ICC 28 mA VCC = 5.5 V, TA = 0°C, XTAL1 at 48 MHz, No load on outputs, Baud rate = 3 Mbit/s 20
Clock input capacitance CI(CLK) 5 7 pF VCC = 0, VSS = 0, f = 1 MHz, TA = 25°C, All other terminals grounded 20
Clock output capacitance CO(CLK) 5 7 pF VCC = 0, VSS = 0, f = 1 MHz, TA = 25°C, All other terminals grounded 20
Input capacitance CI 6 10 pF VCC = 0, VSS = 0, f = 1 MHz, TA = 25°C, All other terminals grounded 20
Output capacitance CO 10 15 pF VCC = 0, VSS = 0, f = 1 MHz, TA = 25°C, All other terminals grounded 20

CAD (KiCad official)

  • Symbol: TL16CP754CIPMR
  • Footprint: Package_QFP:LQFP-64_10x10mm_P0.5mm
  • 3D model: LQFP-64(10x10) (KiCad packages3D, STEP)
  • 3D model files: tl16cp754cipmr-etched.step / tl16cp754cipmr-etched.glb carry the MPN laser-etched on the die in a toggleable Adom.LaserEtch group (Fusion-ready); tl16cp754cipmr.step / tl16cp754cipmr.glb are the bare package body.

Provenance

Data extracted from the manufacturer datasheet, not a distributor listing:

  • Datasheet: Texas Instruments datasheet (56 pp, sha256 40bf41ab529904df, retrieved 2026-11-13, tier: manufacturer)
  • Extractor: parts-factory 2.0.0 / extract_pins 0.3, primary claude-sonnet-5-5 (text), consensus claude-sonnet-5-5 (agreed), guards: pin_guards 0.1: passed. Pins are checked against the footprint pad set and their cited datasheet pages before publish.
  • CAD: KiCad official libraries (CC-BY-SA 4.0).

Datasheet PDF