component
TL16CP754CIPMR
Public Made by Adomby adom
Texas Instruments UART, LQFP-64(10x10). Pinout cross-checked by two models against the datasheet, KiCad symbol/footprint/3D.
3D Model
Open in new tab ↗
Loads when you scroll to it. Unloads after 5 minutes in the background.
Symbol & Footprint
Schematic Symbol
Open full view ↗Loads when you scroll to it. Unloads after 5 minutes in the background.
PCB Footprint
Open full view ↗Loads when you scroll to it. Unloads after 5 minutes in the background.
Datasheet
Open in new tab ↗Loads when you scroll to it. Unloads after 5 minutes in the background.
README
markdownTL16CP754CIPMR
Texas Instruments · UART · LQFP-64(10x10)
TL16CP754CIPMR from Texas Instruments, in a LQFP-64(10x10). Pinout and pin descriptions extracted from the manufacturer datasheet (extract_pins, cross-checked by a second model). Symbol, footprint, and 3D from KiCad-official CAD.
Pinout
| Pin | Name | Type | Function |
|---|---|---|---|
| 24 | A0 | input | Address bit 0 select for internal register addressing. |
| 23 | A1 | input | Address bit 1 select for internal register addressing. |
| 22 | A2 | input | Address bit 2 select for internal register addressing. |
| 64 | CDA | input | Active-low carrier detect input for UART channel A; low indicates the modem has detected a carrier. |
| 18 | CDB | input | Active-low carrier detect input for UART channel B; low indicates the modem has detected a carrier. |
| 31 | CDC | input | Active-low carrier detect input for UART channel C; low indicates the modem has detected a carrier. |
| 49 | CDD | input | Active-low carrier detect input for UART channel D; low indicates the modem has detected a carrier. |
| 21 | CLKSEL | input | Clock select; at reset VCC selects divide-by-1 prescaler and GND selects divide-by-4, latched (inverted) into MCR[7]. |
| 7 | CSA | input | Active-low chip select for UART channel A enabling data transfers with the CPU. |
| 11 | CSB | input | Active-low chip select for UART channel B enabling data transfers with the CPU. |
| 38 | CSC | input | Active-low chip select for UART channel C enabling data transfers with the CPU. |
| 42 | CSD | input | Active-low chip select for UART channel D enabling data transfers with the CPU. |
| 2 | CTSA | input | Active-low clear to send for channel A; low indicates the modem is ready to accept data, status in MSR[4], gates transmit when auto-CTS (EFR[7]) is enabled. |
| 16 | CTSB | input | Active-low clear to send for channel B; low indicates the modem is ready to accept data, status in MSR[4], gates transmit when auto-CTS (EFR[7]) is enabled. |
| 33 | CTSC | input | Active-low clear to send for channel C; low indicates the modem is ready to accept data, status in MSR[4], gates transmit when auto-CTS (EFR[7]) is enabled. |
| 47 | CTSD | input | Active-low clear to send for channel D; low indicates the modem is ready to accept data, status in MSR[4], gates transmit when auto-CTS (EFR[7]) is enabled. |
| 53 | D0 | bidirectional | Bit 0 (LSB, first data bit in serial stream) of the 8-bit 3-state data bus to the CPU. |
| 54 | D1 | bidirectional | Bit 1 of the 8-bit 3-state data bus to the CPU. |
| 55 | D2 | bidirectional | Bit 2 of the 8-bit 3-state data bus to the CPU. |
| 56 | D3 | bidirectional | Bit 3 of the 8-bit 3-state data bus to the CPU. |
| 57 | D4 | bidirectional | Bit 4 of the 8-bit 3-state data bus to the CPU. |
| 58 | D5 | bidirectional | Bit 5 of the 8-bit 3-state data bus to the CPU. |
| 59 | D6 | bidirectional | Bit 6 of the 8-bit 3-state data bus to the CPU. |
| 60 | D7 | bidirectional | Bit 7 of the 8-bit 3-state data bus to the CPU. |
| 1 | DSRA | input | Active-low data set ready for channel A; low indicates the modem is powered on and ready for data exchange. |
| 17 | DSRB | input | Active-low data set ready for channel B; low indicates the modem is powered on and ready for data exchange. |
| 32 | DSRC | input | Active-low data set ready for channel C; low indicates the modem is powered on and ready for data exchange. |
| 48 | DSRD | input | Active-low data set ready for channel D; low indicates the modem is powered on and ready for data exchange. |
| 3 | DTRA | output | Active-low data terminal ready for channel A, set low by writing 1 to MCR[0], high after reset; can drive an external RS-485 driver. |
| 15 | DTRB | output | Active-low data terminal ready for channel B, set low by writing 1 to MCR[0], high after reset; can drive an external RS-485 driver. |
| 34 | DTRC | output | Active-low data terminal ready for channel C, set low by writing 1 to MCR[0], high after reset; can drive an external RS-485 driver. |
| 46 | DTRD | output | Active-low data terminal ready for channel D, set low by writing 1 to MCR[0], high after reset; can drive an external RS-485 driver. |
| 14 | GND | power_in | Power ground. |
| 28 | GND | power_in | Power ground. |
| 45 | GND | power_in | Power ground. |
| 61 | GND | power_in | Power ground. |
| 6 | INTA | output | Active-high interrupt output for channel A, enabled by MCR[3] and IER, high-impedance after reset. |
| 12 | INTB | output | Active-high interrupt output for channel B, enabled by MCR[3] and IER, high-impedance after reset. |
| 37 | INTC | output | Active-high interrupt output for channel C, enabled by MCR[3] and IER, high-impedance after reset. |
| 43 | INTD | output | Active-high interrupt output for channel D, enabled by MCR[3] and IER, high-impedance after reset. |
| 40 | IOR | input | Active-low read strobe that loads the register selected by A0-A2 onto the data bus D0-D7. |
| 9 | IOW | input | Active-low write strobe that transfers data bus D0-D7 into the register selected by A0-A2. |
| 27 | RESET | input | Active-high reset that resets internal registers and all outputs; transmitter output and receiver input are disabled during reset. |
| 63 | RIA | input | Active-low ring indicator for channel A; a low-to-high transition generates a modem status interrupt if enabled. |
| 19 | RIB | input | Active-low ring indicator for channel B; a low-to-high transition generates a modem status interrupt if enabled. |
| 30 | RIC | input | Active-low ring indicator for channel C; a low-to-high transition generates a modem status interrupt if enabled. |
| 50 | RID | input | Active-low ring indicator for channel D; a low-to-high transition generates a modem status interrupt if enabled. |
| 5 | RTSA | output | Active-low request to send for channel A, set low by writing 1 to MCR[1], high after reset; used for auto-RTS (EFR[6]) flow control. |
| 13 | RTSB | output | Active-low request to send for channel B, set low by writing 1 to MCR[1], high after reset; used for auto-RTS (EFR[6]) flow control. |
| 36 | RTSC | output | Active-low request to send for channel C, set low by writing 1 to MCR[1], high after reset; used for auto-RTS (EFR[6]) flow control. |
| 44 | RTSD | output | Active-low request to send for channel D, set low by writing 1 to MCR[1], high after reset; used for auto-RTS (EFR[6]) flow control. |
| 62 | RXA | input | Receive data input for channel A, held high when idle in normal mode and usable in IrDA mode. |
| 20 | RXB | input | Receive data input for channel B, held high when idle in normal mode and usable in IrDA mode. |
| 29 | RXC | input | Receive data input for channel C, held high when idle in normal mode and usable in IrDA mode. |
| 51 | RXD | input | Receive data input for channel D, held high when idle in normal mode and usable in IrDA mode. |
| 8 | TXA | output | Transmit data output for channel A, high when idle in normal mode and low when idle in IrDA mode. |
| 10 | TXB | output | Transmit data output for channel B, high when idle in normal mode and low when idle in IrDA mode. |
| 39 | TXC | output | Transmit data output for channel C, high when idle in normal mode and low when idle in IrDA mode. |
| 41 | TXD | output | Transmit data output for channel D, high when idle in normal mode and low when idle in IrDA mode. |
| 4 | VCC | power_in | Power supply input. |
| 35 | VCC | power_in | Power supply input. |
| 52 | VCC | power_in | Power supply input. |
| 25 | XTAL1 | input | Crystal input or external clock input for the internal oscillator. |
| 26 | XTAL2 | output | Crystal oscillator output or buffered clock output. |
Key specifications
| Parameter | Value |
|---|---|
| Manufacturer | Texas Instruments |
| Package | LQFP-64(10x10) |
| Category | Communication Interface Chip/UART/485/232 |
| Pins | 64 |
Electrical characteristics
Limits as printed in the datasheet (page.json metadata.characteristics carries them as data).
| Parameter | Symbol | Min | Typ | Max | Unit | Conditions | Page |
|---|---|---|---|---|---|---|---|
| Supply voltage range | VCC | -0.5 | 6 | V | 17 | ||
| Input voltage range | VI | -0.5 | V | max VCC + 0.5 V | 17 | ||
| Output voltage range | VO | -0.5 | V | max VCC + 0.5 V | 17 | ||
| Operating free-air temperature range | TA | -40 | 85 | °C | TL16C754CI | 17 | |
| Junction temperature | TJ | -40 | 105 | °C | TL16C754CI | 17 | |
| Storage temperature range | Tstg | -65 | 150 | °C | 17 | ||
| Junction-to-free-air thermal resistance | θJA | 73.1 | °C/W | Low K JEDEC test board, 1s, no air flow | 17 | ||
| Junction-to-case thermal resistance | θJC | 19 | °C/W | Cu cold plate measurement process | 17 | ||
| Junction-to-board thermal resistance | θJB | 28 | °C/W | EIA/JESD 51-8 | 17 | ||
| Junction-to-top of package | ΨJT | 0.95 | °C/W | EIA/JESD 51-2 | 17 | ||
| Junction-to-board | ΨJB | 25.8 | °C/W | EIA/JESD 51-6 | 17 | ||
| Supply voltage | VCC | 1.62 | 1.8 | 1.98 | V | VCC = 1.8 V ±10% | 17 |
| High-level input voltage | VIH | 1.4 | 1.98 | V | VCC = 1.8 V ±10% | 17 | |
| Low-level input voltage | VIL | -0.3 | 0.4 | V | VCC = 1.8 V ±10% | 17 | |
| High-level output current | IOH | 0.5 | mA | All outputs, VCC = 1.8 V ±10% | 17 | ||
| Low-level output current | IOL | 1 | mA | All outputs, VCC = 1.8 V ±10% | 17 | ||
| Oscillator/clock speed | 16 | MHz | VCC = 1.8 V ±10% | 17 | |||
| Supply voltage | VCC | 2.25 | 2.5 | 2.75 | V | VCC = 2.5 V ±10% | 18 |
| High-level input voltage | VIH | 1.8 | 2.75 | V | VCC = 2.5 V ±10% | 18 | |
| Low-level input voltage | VIL | -0.3 | 0.6 | V | VCC = 2.5 V ±10% | 18 | |
| High-level output current | IOH | 1 | mA | All outputs, VCC = 2.5 V ±10% | 18 | ||
| Low-level output current | IOL | 2 | mA | All outputs, VCC = 2.5 V ±10% | 18 | ||
| Oscillator/clock speed | 24 | MHz | VCC = 2.5 V ±10% | 18 | |||
| Supply voltage | VCC | 3 | 3.3 | 3.6 | V | VCC = 3.3 V ±10% | 18 |
| High-level output current | IOH | 1.8 | mA | All outputs, VCC = 3.3 V ±10% | 18 | ||
| Low-level output current | IOL | 3.2 | mA | All outputs, VCC = 3.3 V ±10% | 18 | ||
| Oscillator/clock speed | 32 | MHz | VCC = 3.3 V ±10% | 18 | |||
| Supply voltage | VCC | 5.5 | V | VCC = 5 V ±10% | 18 | ||
| High-level output current | IOH | 4 | mA | All outputs, VCC = 5 V ±10% | 18 | ||
| Low-level output current | IOL | 4 | mA | All outputs, VCC = 5 V ±10% | 18 | ||
| Oscillator/clock speed | 48 | MHz | VCC = 5 V ±10% | 18 | |||
| High-level output voltage | VOH | 1.3 | V | VCC = 1.8 V, IOH = -0.5 mA | 19 | ||
| Low-level output voltage | VOL | 0.5 | V | VCC = 1.8 V, IOL = 1 mA | 19 | ||
| Input current | II | 10 | μA | VCC = 1.98 V, VSS = 0, VI = 0 to 1.98 V, All other terminals floating | 19 | ||
| High-impedance state output current | IOZ | -20 | 20 | μA | VCC = 1.98 V, VSS = 0, VO = 0 to 1.98 V, Chip selected in write mode or chip deselect | 19 | |
| Supply current | ICC | 4 | mA | VCC = 1.98 V, TA = 0°C, XTAL1 at 16 MHz, No load on outputs, Baud rate = 1 Mbit/s | 19 | ||
| High-level output voltage | VOH | 1.8 | V | VCC = 2.5 V, IOH = -1 mA | 19 | ||
| Supply current | ICC | 6 | mA | VCC = 2.75 V, TA = 0°C, XTAL1 at 24 MHz, No load on outputs, Baud rate = 1.5 Mbit/s | 19 | ||
| High-level output voltage | VOH | 2.4 | V | VCC = 3.3 V, IOH = -1.8 mA | 20 | ||
| Low-level output voltage | VOL | 0.5 | V | VCC = 3.3 V, IOL = 3.2 mA | 20 | ||
| Input current | II | 10 | μA | VCC = 3.6 V, VSS = 0, VI = 0 to 3.6 V, All other terminals floating | 20 | ||
| High-impedance state output current | IOZ | -20 | 20 | μA | VCC = 3.6 V, VSS = 0, VO = 0 to 3.6 V, Chip selected in write mode or chip deselect | 20 | |
| Supply current | ICC | 12 | mA | VCC = 3.6 V, TA = 0°C, XTAL1 at 32 MHz, No load on outputs, Baud rate = 2 Mbit/s | 20 | ||
| High-level output voltage | VOH | 4 | V | VCC = 5 V, IOH = -4 mA | 20 | ||
| Low-level output voltage | VOL | 0.4 | V | VCC = 5 V, IOL = 4 mA | 20 | ||
| Supply current | ICC | 28 | mA | VCC = 5.5 V, TA = 0°C, XTAL1 at 48 MHz, No load on outputs, Baud rate = 3 Mbit/s | 20 | ||
| Clock input capacitance | CI(CLK) | 5 | 7 | pF | VCC = 0, VSS = 0, f = 1 MHz, TA = 25°C, All other terminals grounded | 20 | |
| Clock output capacitance | CO(CLK) | 5 | 7 | pF | VCC = 0, VSS = 0, f = 1 MHz, TA = 25°C, All other terminals grounded | 20 | |
| Input capacitance | CI | 6 | 10 | pF | VCC = 0, VSS = 0, f = 1 MHz, TA = 25°C, All other terminals grounded | 20 | |
| Output capacitance | CO | 10 | 15 | pF | VCC = 0, VSS = 0, f = 1 MHz, TA = 25°C, All other terminals grounded | 20 |
CAD (KiCad official)
- Symbol:
TL16CP754CIPMR - Footprint:
Package_QFP:LQFP-64_10x10mm_P0.5mm - 3D model: LQFP-64(10x10) (KiCad packages3D, STEP)
- 3D model files:
tl16cp754cipmr-etched.step/tl16cp754cipmr-etched.glbcarry the MPN laser-etched on the die in a toggleableAdom.LaserEtchgroup (Fusion-ready);tl16cp754cipmr.step/tl16cp754cipmr.glbare the bare package body.
Provenance
Data extracted from the manufacturer datasheet, not a distributor listing:
- Datasheet: Texas Instruments datasheet (56 pp, sha256
40bf41ab529904df, retrieved 2026-11-13, tier: manufacturer) - Extractor: parts-factory
2.0.0/extract_pins 0.3, primaryclaude-sonnet-5-5(text), consensusclaude-sonnet-5-5(agreed), guards: pin_guards 0.1: passed. Pins are checked against the footprint pad set and their cited datasheet pages before publish. - CAD: KiCad official libraries (CC-BY-SA 4.0).