Loads when you scroll to it. Unloads after 5 minutes in the background.

Symbol & Footprint

Schematic Symbol

Open full view ↗
Loads when you scroll to it. Unloads after 5 minutes in the background.

PCB Footprint

Open full view ↗
Loads when you scroll to it. Unloads after 5 minutes in the background.
Loads when you scroll to it. Unloads after 5 minutes in the background.
Download PDF
Contents

README

markdown

RS431AYSF3

Jiangsu RUNIC Tech · Voltage Reference · SOT-23

RS431AYSF3 from Jiangsu RUNIC Tech, in a SOT-23. Pinout and pin descriptions extracted from the manufacturer datasheet by ds2sf; symbol, footprint, and 3D from KiCad-official CAD.

Pinout

Pin Name Type Function
1 CATHODE input Shunt current/voltage input. Sinks 0.5 mA to 100 mA when regulating; withstands up to 36V (37V abs max) relative to the anode.
2 REF input Reference / feedback input. Regulator drives the cathode to hold this pin at VREF (~2.5V typical) relative to the anode. Input current typ. 1.5 uA (4 uA max).
3 ANODE power_in Common pin, normally connected to ground. All voltages are referenced to this pin.

Key specifications

Parameter Value
Manufacturer Jiangsu RUNIC Tech
Package SOT-23
Category PMIC
Pins 3

Ordering variants

Same part, different packaging or reel option.

  • RS431AYSF3
  • RS431AYSF3BYSF3

Electrical characteristics

Limits as printed in the datasheet (page.json metadata.characteristics carries them as data).

Parameter Symbol Min Typ Max Unit Conditions Page
Cathode Voltage VKA -0.3 37 V 4
Cathode Current Range (Continuous) IKA -100 155 mA 4
Reference Input Current Range IREF -0.05 10 mA 4
Operating temperature Topr -40 105 °C 4
Power Dissipation PD 370 mW 4
Storage temperature Tstg -55 150 °C 4
Electrostatic discharge, Human-body model (HBM) V(ESD) 2000 V Human-body model (HBM) 4
Electrostatic discharge, Charge device model (MM) V(ESD) 200 V Charge device model (MM) 4
Cathode Voltage VKA 36 V min printed as VREF 4
Cathode Current Range (Continuous) IKA 0.5 100 mA 4
Operating Ambient Temperature Range TA -40 105 °C 4
Reference Input Voltage (0.5% A grade) VREF 2.488 2.5 2.512 V VKA=VREF, IKA=10mA 5
Deviation of reference Input Voltage over temperature ΔVREF 4.5 25 mV VKA=VREF, IKA=10mA; Tmin ≤ TA ≤ Tmax 5
Ratio of Change in Reference Input Voltage to Change in Cathode Voltage ΔVREF/ΔVKA -1 -2.7 mV/V IKA=10mA; ΔVKA=10V~VREF 5
Ratio of Change in Reference Input Voltage to Change in Cathode Voltage ΔVREF/ΔVKA -0.5 -2 mV/V IKA=10mA; ΔVKA=36V~10V 5
Reference Input Current IREF 1.5 4 uA IKA=10mA, R1=10kΩ, R2=∞ 5
Deviation of Reference Input Current Over Full Temperature Range ΔIREF/ΔTA 0.2 0.4 uA IKA=10mA, R1=10kΩ, R2=∞; TA=full Temperature 5
Minimum cathode current for regulation IKA(min) 0.3 0.5 mA VKA=VREF 5
Off-state cathode Current IKA(OFF) 0.05 0.5 uA VKA=36V, VREF=0V 5
Dynamic Impedance ZKA 0.15 0.5 Ω VKA=VREF, IKA=1 to 100mA, f≤1.0KHz 5
Junction-to-ambient thermal resistance RθJA 185.6 °C/W SOT23 3 pins; single value printed 4
Junction-to-case (top) thermal resistance RθJC(top) 104.3 °C/W SOT23 3 pins; single value printed 4
Junction-to-board thermal resistance RθJB 54.5 °C/W SOT23 3 pins; single value printed 4
Junction-to-top characterization parameter ψJT 31 °C/W SOT23 3 pins; single value printed 4
Junction-to-board characterization parameter ψJB 54.5 °C/W SOT23 3 pins; single value printed 4

CAD (KiCad official)

  • Symbol: RS431AYSF3
  • Footprint: Package_TO_SOT_SMD:SOT-23
  • 3D model: SOT-23 (KiCad packages3D, STEP)
  • 3D model files: rs431aysf3-etched.step / rs431aysf3-etched.glb carry the MPN laser-etched on the die in a toggleable Adom.LaserEtch group (Fusion-ready); rs431aysf3.step / rs431aysf3.glb are the bare package body.

Provenance

Data extracted from the manufacturer datasheet, not a distributor listing:

  • Datasheet: Jiangsu RUNIC Tech datasheet (9 pp, sha256 8f8161e218eaee64, retrieved 2026-08-17, tier: lcsc)
  • Extractor: ds2sf (Claude). Every pin and dimension is cited to a datasheet page; it refuses to fabricate.
  • CAD: KiCad official libraries (CC-BY-SA 4.0).

Datasheet PDF