3D Model
Open in new tab ↗
Loads when you scroll to it. Unloads after 5 minutes in the background.
Symbol & Footprint
Schematic Symbol
Open full view ↗Loads when you scroll to it. Unloads after 5 minutes in the background.
PCB Footprint
Open full view ↗Loads when you scroll to it. Unloads after 5 minutes in the background.
Datasheet
Open in new tab ↗Loads when you scroll to it. Unloads after 5 minutes in the background.
Contents
README
markdownRS431AYSF3
Jiangsu RUNIC Tech · Voltage Reference · SOT-23
RS431AYSF3 from Jiangsu RUNIC Tech, in a SOT-23. Pinout and pin descriptions extracted from the manufacturer datasheet by ds2sf; symbol, footprint, and 3D from KiCad-official CAD.
Pinout
| Pin | Name | Type | Function |
|---|---|---|---|
| 1 | CATHODE | input | Shunt current/voltage input. Sinks 0.5 mA to 100 mA when regulating; withstands up to 36V (37V abs max) relative to the anode. |
| 2 | REF | input | Reference / feedback input. Regulator drives the cathode to hold this pin at VREF (~2.5V typical) relative to the anode. Input current typ. 1.5 uA (4 uA max). |
| 3 | ANODE | power_in | Common pin, normally connected to ground. All voltages are referenced to this pin. |
Key specifications
| Parameter | Value |
|---|---|
| Manufacturer | Jiangsu RUNIC Tech |
| Package | SOT-23 |
| Category | PMIC |
| Pins | 3 |
Ordering variants
Same part, different packaging or reel option.
RS431AYSF3RS431AYSF3BYSF3
Electrical characteristics
Limits as printed in the datasheet (page.json metadata.characteristics carries them as data).
| Parameter | Symbol | Min | Typ | Max | Unit | Conditions | Page |
|---|---|---|---|---|---|---|---|
| Cathode Voltage | VKA | -0.3 | 37 | V | 4 | ||
| Cathode Current Range (Continuous) | IKA | -100 | 155 | mA | 4 | ||
| Reference Input Current Range | IREF | -0.05 | 10 | mA | 4 | ||
| Operating temperature | Topr | -40 | 105 | °C | 4 | ||
| Power Dissipation | PD | 370 | mW | 4 | |||
| Storage temperature | Tstg | -55 | 150 | °C | 4 | ||
| Electrostatic discharge, Human-body model (HBM) | V(ESD) | 2000 | V | Human-body model (HBM) | 4 | ||
| Electrostatic discharge, Charge device model (MM) | V(ESD) | 200 | V | Charge device model (MM) | 4 | ||
| Cathode Voltage | VKA | 36 | V | min printed as VREF | 4 | ||
| Cathode Current Range (Continuous) | IKA | 0.5 | 100 | mA | 4 | ||
| Operating Ambient Temperature Range | TA | -40 | 105 | °C | 4 | ||
| Reference Input Voltage (0.5% A grade) | VREF | 2.488 | 2.5 | 2.512 | V | VKA=VREF, IKA=10mA | 5 |
| Deviation of reference Input Voltage over temperature | ΔVREF | 4.5 | 25 | mV | VKA=VREF, IKA=10mA; Tmin ≤ TA ≤ Tmax | 5 | |
| Ratio of Change in Reference Input Voltage to Change in Cathode Voltage | ΔVREF/ΔVKA | -1 | -2.7 | mV/V | IKA=10mA; ΔVKA=10V~VREF | 5 | |
| Ratio of Change in Reference Input Voltage to Change in Cathode Voltage | ΔVREF/ΔVKA | -0.5 | -2 | mV/V | IKA=10mA; ΔVKA=36V~10V | 5 | |
| Reference Input Current | IREF | 1.5 | 4 | uA | IKA=10mA, R1=10kΩ, R2=∞ | 5 | |
| Deviation of Reference Input Current Over Full Temperature Range | ΔIREF/ΔTA | 0.2 | 0.4 | uA | IKA=10mA, R1=10kΩ, R2=∞; TA=full Temperature | 5 | |
| Minimum cathode current for regulation | IKA(min) | 0.3 | 0.5 | mA | VKA=VREF | 5 | |
| Off-state cathode Current | IKA(OFF) | 0.05 | 0.5 | uA | VKA=36V, VREF=0V | 5 | |
| Dynamic Impedance | ZKA | 0.15 | 0.5 | Ω | VKA=VREF, IKA=1 to 100mA, f≤1.0KHz | 5 | |
| Junction-to-ambient thermal resistance | RθJA | 185.6 | °C/W | SOT23 3 pins; single value printed | 4 | ||
| Junction-to-case (top) thermal resistance | RθJC(top) | 104.3 | °C/W | SOT23 3 pins; single value printed | 4 | ||
| Junction-to-board thermal resistance | RθJB | 54.5 | °C/W | SOT23 3 pins; single value printed | 4 | ||
| Junction-to-top characterization parameter | ψJT | 31 | °C/W | SOT23 3 pins; single value printed | 4 | ||
| Junction-to-board characterization parameter | ψJB | 54.5 | °C/W | SOT23 3 pins; single value printed | 4 |
CAD (KiCad official)
- Symbol:
RS431AYSF3 - Footprint:
Package_TO_SOT_SMD:SOT-23 - 3D model: SOT-23 (KiCad packages3D, STEP)
- 3D model files:
rs431aysf3-etched.step/rs431aysf3-etched.glbcarry the MPN laser-etched on the die in a toggleableAdom.LaserEtchgroup (Fusion-ready);rs431aysf3.step/rs431aysf3.glbare the bare package body.
Provenance
Data extracted from the manufacturer datasheet, not a distributor listing:
- Datasheet: Jiangsu RUNIC Tech datasheet (9 pp, sha256
8f8161e218eaee64, retrieved 2026-08-17, tier: lcsc) - Extractor:
ds2sf(Claude). Every pin and dimension is cited to a datasheet page; it refuses to fabricate. - CAD: KiCad official libraries (CC-BY-SA 4.0).