3D Model
Open in new tab ↗
Loads when you scroll to it. Unloads after 5 minutes in the background.
Symbol & Footprint
Schematic Symbol
Open full view ↗Loads when you scroll to it. Unloads after 5 minutes in the background.
PCB Footprint
Open full view ↗Loads when you scroll to it. Unloads after 5 minutes in the background.
Datasheet
Open in new tab ↗Loads when you scroll to it. Unloads after 5 minutes in the background.
README
markdownW25N01GVZEIR
Winbond Elec · NAND FLASH · WSON-8(6x8)
W25N01GVZEIR from Winbond Elec, in a WSON-8(6x8). Pinout and pin descriptions extracted from the manufacturer datasheet (extract_pins, cross-checked by a second model); symbol, footprint, and 3D from KiCad-official CAD.
Pinout
| Pin | Name | Type | Function |
|---|---|---|---|
| 1 | /CS | input | Chip Select Input; when /CS is high the device is deselected and the DO/IO pins are at high impedance, and after power-up /CS must transition from high to low before a new instruction is accepted. |
| 2 | DO (IO1) | bidirectional | Data Output (Data Input Output 1), used for Standard and Dual SPI instructions, with data read from the device on the falling edge of CLK. |
| 3 | /WP (IO2) | bidirectional | Write Protect Input (Data Input Output 2), functioning as IO2 for Quad SPI operations and as an active low write protect input for Standard/Dual SPI when WP-E=1. |
| 4 | GND | power_in | Ground reference for the device. |
| 5 | DI (IO0) | bidirectional | Data Input (Data Input Output 0), used for Standard and Dual SPI instructions, with data written to the device on the rising edge of CLK. |
| 6 | CLK | input | Serial Clock Input providing the timing for serial input and output operations, with SPI clock frequencies of up to 104MHz supported. |
| 7 | /HOLD (IO3) | bidirectional | Hold Input (Data Input Output 3), an active low pause input for Standard/Dual SPI that becomes IO3 for Quad SPI operations. |
| 8 | VCC | power_in | Power supply input; the W25N01GV operates from a single 2.7V to 3.6V supply. |
| 9 | EP | passive | Exposed pad (from the footprint; not named in the datasheet pin table). |
Key specifications
| Parameter | Value |
|---|---|
| Manufacturer | Winbond Elec |
| Package | WSON-8(6x8) |
| Category | Memory |
| Pins | 9 |
Electrical characteristics
Limits as printed in the datasheet (page.json metadata.characteristics carries them as data).
| Parameter | Symbol | Min | Typ | Max | Unit | Conditions | Page |
|---|---|---|---|---|---|---|---|
| Supply Voltage | VCC | 2.7 | 3.6 | V | 56 | ||
| Ambient Temperature, Operating | TA | -40 | 85 | °C | Industrial Grade | 56 | |
| Supply Voltage | VCC | -0.6 | 4.6 | V | 56 | ||
| Voltage Applied to Any Pin | VIO | -0.6 | 4.6 | V | Relative to Ground | 56 | |
| Storage Temperature | TSTG | -65 | 150 | °C | 56 | ||
| Electrostatic Discharge Voltage | VESD | -2000 | 2000 | V | Human Body Model | 56 | |
| Write Inhibit Threshold Voltage | VWI | 1 | 2 | V | 57 | ||
| Input Leakage | ILI | -2 | 2 | µA | 58 | ||
| I/O Leakage | ILO | -2 | 2 | µA | 58 | ||
| Standby Current | ICC1 | 10 | 50 | µA | /CS = VCC, VIN = GND or VCC (85°C) | 58 | |
| Read Current | ICC2 | 25 | 35 | mA | C = 0.1 VCC / 0.9 VCC, DO = Open | 58 | |
| Current Page Program | ICC3 | 25 | 35 | mA | /CS = VCC | 58 | |
| Current Block Erase | ICC4 | 25 | 35 | mA | /CS = VCC | 58 | |
| Output Low Voltage | VOL | 0.4 | V | IOL = 2.1mA | 58 | ||
| Output High Voltage | VOH | 2.4 | V | IOH = -400 µA | 58 | ||
| Clock frequency for all instructions | FR | 104 | MHz | 60 | |||
| Clock High, Low Time for all instructions | tCLH, tCLL | 4 | ns | 60 | |||
| Clock Rise Time peak to peak | tCLCH | 0.1 | V/ns | 60 | |||
| Clock Fall Time peak to peak | tCHCL | 0.1 | V/ns | 60 | |||
| /CS Active Setup Time relative to CLK | tSLCH | 5 | ns | 60 | |||
| /CS Not Active Hold Time relative to CLK | tCHSL | 5 | ns | 60 | |||
| Data In Setup Time | tDVCH | 2 | ns | 60 | |||
| Data In Hold Time | tCHDX | 3 | ns | 60 | |||
| /CS Active Hold Time relative to CLK | tCHSH | 3 | ns | 60 | |||
| /CS Not Active Setup Time relative to CLK | tSHCH | 3 | ns | 60 | |||
| /CS Deselect Time (for Array Read to Array Read) | tSHSL1 | 10 | ns | Array Read to Array Read | 60 | ||
| /CS Deselect Time (for Erase, Program or Read Status Registers to Read Status Registers) | tSHSL2 | 50 | ns | Erase, Program or Read Status Registers to Read Status Registers | 60 | ||
| Output Disable Time | tSHQZ | 7 | ns | 60 | |||
| Clock Low to Output Valid | tCLQV | 7 | ns | 60 | |||
| Output Hold Time | tCLQX | 2 | ns | 60 | |||
| /HOLD Active Setup Time relative to CLK | tHLCH | 5 | ns | 60 | |||
| /HOLD Active Hold Time relative to CLK | tCHHH | 5 | ns | 60 | |||
| /HOLD Not Active Setup Time relative to CLK | tHHCH | 5 | ns | 61 | |||
| /HOLD Not Active Hold Time relative to CLK | tCHHL | 5 | ns | 61 | |||
| /HOLD to Output Low-Z | tHHQX | 7 | ns | 61 | |||
| /HOLD to Output High-Z | tHLQZ | 12 | ns | 61 | |||
| Write Protect Setup Time Before /CS Low | tWHSL | 20 | ns | 61 | |||
| Write Protect Hold Time After /CS High | tSHWL | 100 | ns | 61 | |||
| Read Page Data Time (ECC disabled) | tRD1 | 25 | µs | ECC disabled | 61 | ||
| Read Page Data Time (ECC enabled) | tRD2 | 60 | µs | ECC enabled | 61 | ||
| Page Program, OTP Lock, BBM Management Time | tPP | 250 | 700 | us | 61 | ||
| Block Erase Time | tBE | 2 | 10 | ms | 61 |
CAD (KiCad official)
- Symbol:
W25N01GVZEIR - Footprint:
Package_SON:WSON-8-1EP_8x6mm_P1.27mm_EP3.4x4.3mm - 3D model: WSON-8(6x8) (KiCad packages3D, STEP)
- 3D model files:
w25n01gvzeir-etched.step/w25n01gvzeir-etched.glbcarry the MPN laser-etched on the die in a toggleableAdom.LaserEtchgroup (Fusion-ready);w25n01gvzeir.step/w25n01gvzeir.glbare the bare package body.
Provenance
Data extracted from the manufacturer datasheet, not a distributor listing:
- Datasheet: Winbond Elec datasheet (70 pp, sha256
3c7700e1828df264, retrieved 2026-10-28, tier: lcsc) - Extractor: parts-factory
2.0.0/extract_pins 0.3, primaryclaude-haiku-5-5(text), consensusclaude-sonnet-5-5(agreed), guards: pin_guards 0.1: passed. Pins are checked against the footprint pad set and their cited datasheet pages before publish. - CAD: KiCad official libraries (CC-BY-SA 4.0).