Loads when you scroll to it. Unloads after 5 minutes in the background.

Symbol & Footprint

Schematic Symbol

Open full view ↗
Loads when you scroll to it. Unloads after 5 minutes in the background.

PCB Footprint

Open full view ↗
Loads when you scroll to it. Unloads after 5 minutes in the background.
Loads when you scroll to it. Unloads after 5 minutes in the background.
Download PDF
Contents

README

markdown

W25N01GVZEIR

Winbond Elec · NAND FLASH · WSON-8(6x8)

W25N01GVZEIR from Winbond Elec, in a WSON-8(6x8). Pinout and pin descriptions extracted from the manufacturer datasheet (extract_pins, cross-checked by a second model); symbol, footprint, and 3D from KiCad-official CAD.

Pinout

Pin Name Type Function
1 /CS input Chip Select Input; when /CS is high the device is deselected and the DO/IO pins are at high impedance, and after power-up /CS must transition from high to low before a new instruction is accepted.
2 DO (IO1) bidirectional Data Output (Data Input Output 1), used for Standard and Dual SPI instructions, with data read from the device on the falling edge of CLK.
3 /WP (IO2) bidirectional Write Protect Input (Data Input Output 2), functioning as IO2 for Quad SPI operations and as an active low write protect input for Standard/Dual SPI when WP-E=1.
4 GND power_in Ground reference for the device.
5 DI (IO0) bidirectional Data Input (Data Input Output 0), used for Standard and Dual SPI instructions, with data written to the device on the rising edge of CLK.
6 CLK input Serial Clock Input providing the timing for serial input and output operations, with SPI clock frequencies of up to 104MHz supported.
7 /HOLD (IO3) bidirectional Hold Input (Data Input Output 3), an active low pause input for Standard/Dual SPI that becomes IO3 for Quad SPI operations.
8 VCC power_in Power supply input; the W25N01GV operates from a single 2.7V to 3.6V supply.
9 EP passive Exposed pad (from the footprint; not named in the datasheet pin table).

Key specifications

Parameter Value
Manufacturer Winbond Elec
Package WSON-8(6x8)
Category Memory
Pins 9

Electrical characteristics

Limits as printed in the datasheet (page.json metadata.characteristics carries them as data).

Parameter Symbol Min Typ Max Unit Conditions Page
Supply Voltage VCC 2.7 3.6 V 56
Ambient Temperature, Operating TA -40 85 °C Industrial Grade 56
Supply Voltage VCC -0.6 4.6 V 56
Voltage Applied to Any Pin VIO -0.6 4.6 V Relative to Ground 56
Storage Temperature TSTG -65 150 °C 56
Electrostatic Discharge Voltage VESD -2000 2000 V Human Body Model 56
Write Inhibit Threshold Voltage VWI 1 2 V 57
Input Leakage ILI -2 2 µA 58
I/O Leakage ILO -2 2 µA 58
Standby Current ICC1 10 50 µA /CS = VCC, VIN = GND or VCC (85°C) 58
Read Current ICC2 25 35 mA C = 0.1 VCC / 0.9 VCC, DO = Open 58
Current Page Program ICC3 25 35 mA /CS = VCC 58
Current Block Erase ICC4 25 35 mA /CS = VCC 58
Output Low Voltage VOL 0.4 V IOL = 2.1mA 58
Output High Voltage VOH 2.4 V IOH = -400 µA 58
Clock frequency for all instructions FR 104 MHz 60
Clock High, Low Time for all instructions tCLH, tCLL 4 ns 60
Clock Rise Time peak to peak tCLCH 0.1 V/ns 60
Clock Fall Time peak to peak tCHCL 0.1 V/ns 60
/CS Active Setup Time relative to CLK tSLCH 5 ns 60
/CS Not Active Hold Time relative to CLK tCHSL 5 ns 60
Data In Setup Time tDVCH 2 ns 60
Data In Hold Time tCHDX 3 ns 60
/CS Active Hold Time relative to CLK tCHSH 3 ns 60
/CS Not Active Setup Time relative to CLK tSHCH 3 ns 60
/CS Deselect Time (for Array Read to Array Read) tSHSL1 10 ns Array Read to Array Read 60
/CS Deselect Time (for Erase, Program or Read Status Registers to Read Status Registers) tSHSL2 50 ns Erase, Program or Read Status Registers to Read Status Registers 60
Output Disable Time tSHQZ 7 ns 60
Clock Low to Output Valid tCLQV 7 ns 60
Output Hold Time tCLQX 2 ns 60
/HOLD Active Setup Time relative to CLK tHLCH 5 ns 60
/HOLD Active Hold Time relative to CLK tCHHH 5 ns 60
/HOLD Not Active Setup Time relative to CLK tHHCH 5 ns 61
/HOLD Not Active Hold Time relative to CLK tCHHL 5 ns 61
/HOLD to Output Low-Z tHHQX 7 ns 61
/HOLD to Output High-Z tHLQZ 12 ns 61
Write Protect Setup Time Before /CS Low tWHSL 20 ns 61
Write Protect Hold Time After /CS High tSHWL 100 ns 61
Read Page Data Time (ECC disabled) tRD1 25 µs ECC disabled 61
Read Page Data Time (ECC enabled) tRD2 60 µs ECC enabled 61
Page Program, OTP Lock, BBM Management Time tPP 250 700 us 61
Block Erase Time tBE 2 10 ms 61

CAD (KiCad official)

  • Symbol: W25N01GVZEIR
  • Footprint: Package_SON:WSON-8-1EP_8x6mm_P1.27mm_EP3.4x4.3mm
  • 3D model: WSON-8(6x8) (KiCad packages3D, STEP)
  • 3D model files: w25n01gvzeir-etched.step / w25n01gvzeir-etched.glb carry the MPN laser-etched on the die in a toggleable Adom.LaserEtch group (Fusion-ready); w25n01gvzeir.step / w25n01gvzeir.glb are the bare package body.

Provenance

Data extracted from the manufacturer datasheet, not a distributor listing:

  • Datasheet: Winbond Elec datasheet (70 pp, sha256 3c7700e1828df264, retrieved 2026-10-28, tier: lcsc)
  • Extractor: parts-factory 2.0.0 / extract_pins 0.3, primary claude-haiku-5-5 (text), consensus claude-sonnet-5-5 (agreed), guards: pin_guards 0.1: passed. Pins are checked against the footprint pad set and their cited datasheet pages before publish.
  • CAD: KiCad official libraries (CC-BY-SA 4.0).

Datasheet PDF