Loads when you scroll to it. Unloads after 5 minutes in the background.

Symbol & Footprint

Schematic Symbol

Open full view ↗
Loads when you scroll to it. Unloads after 5 minutes in the background.

PCB Footprint

Open full view ↗
Loads when you scroll to it. Unloads after 5 minutes in the background.
Loads when you scroll to it. Unloads after 5 minutes in the background.
Download PDF
Contents

README

markdown

MCP25020-I

Microchip Tech · CAN Transceivers · PDIP-14

MCP25020-I from Microchip Tech, in a PDIP-14. Pinout and pin descriptions extracted from the manufacturer datasheet (extract_pins, cross-checked by a second model); symbol, footprint, and 3D from KiCad-official CAD.

Pinout

Pin Name Type Function
1 GP0/AN0 bidirectional General-purpose I/O pin with TTL input buffer; alternate function is analog input channel 0, which is available only on MCP2505X devices.
2 GP1/AN1 bidirectional General-purpose I/O pin with TTL input buffer; alternate function is analog input channel 1, which is available only on MCP2505X devices.
3 GP2/AN2/PWM1 bidirectional General-purpose I/O pin with TTL input buffer; alternate functions are analog input (MCP2505X only) and PWM output.
4 GP3/AN3/PWM2 bidirectional General-purpose I/O pin with TTL input buffer; alternate functions are analog input (MCP2505X only) and PWM output.
5 GP4/VREF- bidirectional General-purpose I/O pin with TTL input buffer; alternate function is external VREF- and it serves as the data pin in programming mode.
6 GP5/VREF+ bidirectional General-purpose I/O pin with TTL input buffer; alternate function is external VREF+ input and it serves as the clock pin in programming mode.
7 VSS power_in Ground reference for the device, also ground in programming mode.
8 OSC1/CLKIN input External oscillator input or external clock input.
9 OSC2 output External oscillator output.
10 GP6/CLKOUT bidirectional General-purpose I/O pin with TTL input buffer; alternate function is clock output (CLKOUT).
11 GP7/RST/VPP input Input-only pin with TTL input buffer used as external Reset input, and as the programming voltage (VPP) input in programming mode; voltage on RST is rated 0V to 14V.
12 RXCAN input CAN data receive input; not connected for 1-wire operation (MCP250X5 only).
13 TXCAN/TXRXCAN output CAN data transmit output; the TXRXCAN combined TX/RX function for 1-wire operation applies only to MCP250X5 devices.
14 VDD power_in Positive supply, operating range 2.7V to 5.5V, also power in programming mode; absolute maximum 7.0V.

Key specifications

Parameter Value
Manufacturer Microchip Tech
Package PDIP-14
Category Communication Interface Chip
Pins 14

Electrical characteristics

Limits as printed in the datasheet (page.json metadata.characteristics carries them as data).

Parameter Symbol Min Typ Max Unit Conditions Page
Supply Voltage (XT and LP OSC) VDD 2.7 5.5 V XT and LP OSC Configuration 54
Supply Voltage (HS OSC) VDD 4.5 5.5 V HS OSC Configuration (Note 2) 54
VDD Rise Rate for internal POR SVDD 0.05 V/ms Note 3 54
High-level input voltage GPIO pins VIH 2 V max printed VDD+0.3 54
High-level input voltage RXCAN (Schmitt Trigger) VIH 0.7 VDD max printed VDD 54
High-level input voltage OSC1 VIH 0.85 VDD max printed VDD 54
Low-level input voltage RXCAN (Schmitt Trigger) VIL 0.2 VDD min printed VSS 54
Low-level input voltage GPIO pins VIL -0.3 0.5 V max printed as 0.5V 54
Low-level input voltage OSC1 VIL 0.2 VDD min printed VSS 54
Low-level output voltage TXCAN, GPIO VOL 0.6 V IOL = 8.5 mA, VDD = 4.5V 54
Input leakage current, all I/O except OSC1, GP7 ILI -1 1 µA 54
Input leakage current, OSC1, GP7 ILI -5 5 µA 54
Internal capacitance (all inputs/outputs except GP7) CINT 7 pF TAMB = 25°C, fC = 1.0 MHz, VDD = 5.0V (Note 3) 54
Internal capacitance GP7 CINT 15 pF TAMB = 25°C, fC = 1.0 MHz, VDD = 5.0V (Note 3) 54
Operating Current IDD 20 mA XT OSC VDD = 5.5V; FOSC = 25 MHz 54
Standby Current (CAN Sleep Mode) IDDS 30 µA Inputs tied to VDD or VSS 54
CLKIN Frequency XT FOS 0 4 MHz XT osc mode 55
CLKIN Frequency HS FOS 0 25 MHz HS osc mode (Note 3) 55
CLKIN Frequency LP FOS 0 200 kHz LP osc mode 55
Port output rise time TIOR 40 ns Note 1 55
Port output fall time TIOF 40 ns Note 1 55
RST Pulse Low TMCL 2 µs VDD = 5V 55
Power-up Timer TPWRT 28 132 ms VDD = 5V 55
I/O Hi-impedance from RST low TIOZ 2.1 µs Note 1 55
A/D Reference Voltage VREF 4.096 V Absolute minimum to ensure 10-bit accuracy; max printed VDD+0.3 57
VREF input current IREF 10 µA 57
Recommended impedance of analog source ZAIN 2.5 kΩ Note: design guidance only 57
Ambient temperature under bias -55 125 °C 53
Storage temperature -65 150 °C 53
Voltage on any pin w.r.t. VSS (except VDD and RST) -0.3 V max printed VDD + 0.6V 53
VDD VDD 0 7 V 53
Voltage on RST w.r.t. VSS 0 14 V 53
Total power dissipation 1 W Note 1 53
Maximum source current out of VSS pin 300 mA 53
Input clamp current Iik -20 20 mA Vi < 0 or Vi > VDD 53
Output clamp current Iok -20 20 mA VO < 0 or VO > VDD 53
Maximum current sunk by any I/O pin 25 mA 53
Maximum current sourced by any input pin 25 mA 53
Soldering temperature of leads 300 °C 10 seconds 53
ESD protection on all pins 3.5 kV printed as ≥ 3.5 kV 53
Operating temperature (Industrial) TAMB -40 85 °C Industrial (I) 54

CAD (KiCad official)

  • Symbol: MCP25020-I
  • Footprint: Package_DIP:DIP-14_W7.62mm
  • 3D model: PDIP-14 (KiCad packages3D, STEP)
  • 3D model files: mcp25020-i-etched.step / mcp25020-i-etched.glb carry the MPN laser-etched on the die in a toggleable Adom.LaserEtch group (Fusion-ready); mcp25020-i.step / mcp25020-i.glb are the bare package body.

Provenance

Data extracted from the manufacturer datasheet, not a distributor listing:

  • Datasheet: Microchip Tech datasheet (70 pp, sha256 19d822d92a3b1966, retrieved 2026-10-30, tier: manufacturer)
  • Extractor: parts-factory 2.0.0 / extract_pins 0.3, primary claude-sonnet-5-5 (text), consensus claude-sonnet-5-5 (agreed), guards: pin_guards 0.1: passed. Pins are checked against the footprint pad set and their cited datasheet pages before publish.
  • CAD: KiCad official libraries (CC-BY-SA 4.0).

Datasheet PDF