Generated by kicad-footprint-generator · KiCad file format 20260206
MCP25020-I
Microchip Tech · CAN Transceivers · PDIP-14
MCP25020-I from Microchip Tech, in a PDIP-14. Pinout and pin descriptions extracted from the manufacturer datasheet (extract_pins, cross-checked by a second model); symbol, footprint, and 3D from KiCad-official CAD.
Pinout
| Pin | Name | Type | Function |
|---|---|---|---|
| 1 | GP0/AN0 | bidirectional | General-purpose I/O pin with TTL input buffer; alternate function is analog input channel 0, which is available only on MCP2505X devices. |
| 2 | GP1/AN1 | bidirectional | General-purpose I/O pin with TTL input buffer; alternate function is analog input channel 1, which is available only on MCP2505X devices. |
| 3 | GP2/AN2/PWM1 | bidirectional | General-purpose I/O pin with TTL input buffer; alternate functions are analog input (MCP2505X only) and PWM output. |
| 4 | GP3/AN3/PWM2 | bidirectional | General-purpose I/O pin with TTL input buffer; alternate functions are analog input (MCP2505X only) and PWM output. |
| 5 | GP4/VREF- | bidirectional | General-purpose I/O pin with TTL input buffer; alternate function is external VREF- and it serves as the data pin in programming mode. |
| 6 | GP5/VREF+ | bidirectional | General-purpose I/O pin with TTL input buffer; alternate function is external VREF+ input and it serves as the clock pin in programming mode. |
| 7 | VSS | power_in | Ground reference for the device, also ground in programming mode. |
| 8 | OSC1/CLKIN | input | External oscillator input or external clock input. |
| 9 | OSC2 | output | External oscillator output. |
| 10 | GP6/CLKOUT | bidirectional | General-purpose I/O pin with TTL input buffer; alternate function is clock output (CLKOUT). |
| 11 | GP7/RST/VPP | input | Input-only pin with TTL input buffer used as external Reset input, and as the programming voltage (VPP) input in programming mode; voltage on RST is rated 0V to 14V. |
| 12 | RXCAN | input | CAN data receive input; not connected for 1-wire operation (MCP250X5 only). |
| 13 | TXCAN/TXRXCAN | output | CAN data transmit output; the TXRXCAN combined TX/RX function for 1-wire operation applies only to MCP250X5 devices. |
| 14 | VDD | power_in | Positive supply, operating range 2.7V to 5.5V, also power in programming mode; absolute maximum 7.0V. |
Key specifications
| Parameter | Value |
|---|---|
| Manufacturer | Microchip Tech |
| Package | PDIP-14 |
| Category | Communication Interface Chip |
| Pins | 14 |
Electrical characteristics
Limits as printed in the datasheet (page.json metadata.characteristics carries them as data).
| Parameter | Symbol | Min | Typ | Max | Unit | Conditions | Page |
|---|---|---|---|---|---|---|---|
| Supply Voltage (XT and LP OSC) | VDD | 2.7 | 5.5 | V | XT and LP OSC Configuration | 54 | |
| Supply Voltage (HS OSC) | VDD | 4.5 | 5.5 | V | HS OSC Configuration (Note 2) | 54 | |
| VDD Rise Rate for internal POR | SVDD | 0.05 | V/ms | Note 3 | 54 | ||
| High-level input voltage GPIO pins | VIH | 2 | V | max printed VDD+0.3 | 54 | ||
| High-level input voltage RXCAN (Schmitt Trigger) | VIH | 0.7 | VDD | max printed VDD | 54 | ||
| High-level input voltage OSC1 | VIH | 0.85 | VDD | max printed VDD | 54 | ||
| Low-level input voltage RXCAN (Schmitt Trigger) | VIL | 0.2 | VDD | min printed VSS | 54 | ||
| Low-level input voltage GPIO pins | VIL | -0.3 | 0.5 | V | max printed as 0.5V | 54 | |
| Low-level input voltage OSC1 | VIL | 0.2 | VDD | min printed VSS | 54 | ||
| Low-level output voltage TXCAN, GPIO | VOL | 0.6 | V | IOL = 8.5 mA, VDD = 4.5V | 54 | ||
| Input leakage current, all I/O except OSC1, GP7 | ILI | -1 | 1 | µA | 54 | ||
| Input leakage current, OSC1, GP7 | ILI | -5 | 5 | µA | 54 | ||
| Internal capacitance (all inputs/outputs except GP7) | CINT | 7 | pF | TAMB = 25°C, fC = 1.0 MHz, VDD = 5.0V (Note 3) | 54 | ||
| Internal capacitance GP7 | CINT | 15 | pF | TAMB = 25°C, fC = 1.0 MHz, VDD = 5.0V (Note 3) | 54 | ||
| Operating Current | IDD | 20 | mA | XT OSC VDD = 5.5V; FOSC = 25 MHz | 54 | ||
| Standby Current (CAN Sleep Mode) | IDDS | 30 | µA | Inputs tied to VDD or VSS | 54 | ||
| CLKIN Frequency XT | FOS | 0 | 4 | MHz | XT osc mode | 55 | |
| CLKIN Frequency HS | FOS | 0 | 25 | MHz | HS osc mode (Note 3) | 55 | |
| CLKIN Frequency LP | FOS | 0 | 200 | kHz | LP osc mode | 55 | |
| Port output rise time | TIOR | 40 | ns | Note 1 | 55 | ||
| Port output fall time | TIOF | 40 | ns | Note 1 | 55 | ||
| RST Pulse Low | TMCL | 2 | µs | VDD = 5V | 55 | ||
| Power-up Timer | TPWRT | 28 | 132 | ms | VDD = 5V | 55 | |
| I/O Hi-impedance from RST low | TIOZ | 2.1 | µs | Note 1 | 55 | ||
| A/D Reference Voltage | VREF | 4.096 | V | Absolute minimum to ensure 10-bit accuracy; max printed VDD+0.3 | 57 | ||
| VREF input current | IREF | 10 | µA | 57 | |||
| Recommended impedance of analog source | ZAIN | 2.5 | kΩ | Note: design guidance only | 57 | ||
| Ambient temperature under bias | -55 | 125 | °C | 53 | |||
| Storage temperature | -65 | 150 | °C | 53 | |||
| Voltage on any pin w.r.t. VSS (except VDD and RST) | -0.3 | V | max printed VDD + 0.6V | 53 | |||
| VDD | VDD | 0 | 7 | V | 53 | ||
| Voltage on RST w.r.t. VSS | 0 | 14 | V | 53 | |||
| Total power dissipation | 1 | W | Note 1 | 53 | |||
| Maximum source current out of VSS pin | 300 | mA | 53 | ||||
| Input clamp current | Iik | -20 | 20 | mA | Vi < 0 or Vi > VDD | 53 | |
| Output clamp current | Iok | -20 | 20 | mA | VO < 0 or VO > VDD | 53 | |
| Maximum current sunk by any I/O pin | 25 | mA | 53 | ||||
| Maximum current sourced by any input pin | 25 | mA | 53 | ||||
| Soldering temperature of leads | 300 | °C | 10 seconds | 53 | |||
| ESD protection on all pins | 3.5 | kV | printed as ≥ 3.5 kV | 53 | |||
| Operating temperature (Industrial) | TAMB | -40 | 85 | °C | Industrial (I) | 54 |
CAD (KiCad official)
- Symbol:
MCP25020-I - Footprint:
Package_DIP:DIP-14_W7.62mm - 3D model: PDIP-14 (KiCad packages3D, STEP)
- 3D model files:
mcp25020-i-etched.step/mcp25020-i-etched.glbcarry the MPN laser-etched on the die in a toggleableAdom.LaserEtchgroup (Fusion-ready);mcp25020-i.step/mcp25020-i.glbare the bare package body.
Provenance
Data extracted from the manufacturer datasheet, not a distributor listing:
- Datasheet: Microchip Tech datasheet (70 pp, sha256
19d822d92a3b1966, retrieved 2026-10-30, tier: manufacturer) - Extractor: parts-factory
2.0.0/extract_pins 0.3, primaryclaude-sonnet-5-5(text), consensusclaude-sonnet-5-5(agreed), guards: pin_guards 0.1: passed. Pins are checked against the footprint pad set and their cited datasheet pages before publish. - CAD: KiCad official libraries (CC-BY-SA 4.0).