3D Model
Open in new tab ↗
Loads when you scroll to it. Unloads after 5 minutes in the background.
Symbol & Footprint
Schematic Symbol
Open full view ↗Loads when you scroll to it. Unloads after 5 minutes in the background.
PCB Footprint
Open full view ↗Loads when you scroll to it. Unloads after 5 minutes in the background.
Datasheet
Open in new tab ↗Loads when you scroll to it. Unloads after 5 minutes in the background.
README
markdownU8700
UNI-SEMIC · AC-DC Controllers And Regulators · SOT-23-6L
U8700 from UNI-SEMIC, in a SOT-23-6L. Pinout and pin descriptions extracted from the manufacturer datasheet (extract_pins, cross-checked by a second model). Symbol, footprint, and 3D from KiCad-official CAD.
Pinout
| Pin | Name | Type | Function |
|---|---|---|---|
| 1 | GND | power_in | Chip ground pin. |
| 2 | FB | input | Feedback input; in closed loop it connects to the optocoupler, and its voltage sets the PWM drive duty cycle and the CS turn-off voltage. |
| 3 | SEL | input | Multiplexed function pin: in constant-current/constant-voltage output applications a 10-47nF capacitor to GND is recommended, and in constant-voltage output applications it is left floating. |
| 4 | CS | input | Current sense input pin. |
| 5 | VDD | power_in | Chip power supply pin. |
| 6 | GATE | output | Totem-pole driver output that connects to the external MOSFET. |
Key specifications
| Parameter | Value |
|---|---|
| Manufacturer | UNI-SEMIC |
| Package | SOT-23-6L |
| Category | Power Management (PMIC) |
| Pins | 6 |
Electrical characteristics
Limits as printed in the datasheet (page.json metadata.characteristics carries them as data).
| Parameter | Symbol | Min | Typ | Max | Unit | Conditions | Page |
|---|---|---|---|---|---|---|---|
| VDD DC supply voltage | VDD | 30 | V | 4 | |||
| VDD DC clamp current | 10 | mA | 4 | ||||
| FB, CS, SEL voltage | -0.3 | 7 | V | 4 | |||
| Storage temperature range | -65 | 150 | °C | 4 | |||
| Maximum junction temperature | 175 | °C | 4 | ||||
| Soldering temperature (soldering, 10 s) | 260 | °C | 10 s | 4 | |||
| ESD human body model | 4 | kV | 4 | ||||
| ESD machine model | 500 | V | 4 | ||||
| VDD supply voltage (recommended) | VDD | 10 | 26 | V | 4 | ||
| Operating ambient temperature | -40 | 85 | °C | 4 | |||
| VDD turn-on voltage | VDD_ON | 19 | 21 | 21.5 | V | 4 | |
| VDD turn-off voltage | VDD_OFF | 8 | 9 | 10 | V | 4 | |
| VDD OVP threshold | VDD_OVP | 29 | 31 | 33 | V | 4 | |
| VDD clamp voltage | VDD_Clamp | 33 | 35 | 37 | V | I(VDD) = 7 mA | 4 |
| VDD start-up current | IVDD_st | 2 | 20 | uA | 4 | ||
| VDD operating current | IVDD_Op | 1.2 | 2 | mA | VFB=3V,GATE=1nF | 4 | |
| VDD standby current | IVDD_standby | 0.6 | 1 | mA | 4 | ||
| Overcurrent (Vcs max) threshold, constant-voltage mode | Vcs(max) | 0.97 | 1 | 1.03 | V | 5 | |
| Normal operating frequency | FOSC | 60 | 65 | 70 | KHz | 5 | |
| Frequency shuffle range | ΔF(shuffle)/FOSC | -4 | 4 | % | 5 | ||
| Constant-current reference (SEL capacitor) | VCC_Reg_SEL | 194 | 200 | 206 | mV | 5 | |
| Maximum duty cycle | DMAX | 66.7 | % | 5 | |||
| Junction-to-ambient thermal resistance (SOT23-6) | 250 | °C/W | 4 | ||||
| FB open-circuit voltage | VFB_Open | 5.9 | V | 4 | |||
| FB short-circuit current | IFB_Short | 0.3 | mA | FB short | 4 | ||
| FB input impedance | ZFB_IN | 20 | KΩ | 4 | |||
| PWM gain | ΔVFB/ΔVCS | 2 | V/V | 5 | |||
| Burst (skip) FB voltage threshold | Vskip | 1 | V | 5 | |||
| Overload protection FB voltage threshold | VTH_OLP | 3.6 | V | 5 | |||
| Overload protection delay time | TD_OLP | 75 | ms | SEL floating | 5 | ||
| Leading-edge blanking | TLEB | 250 | ns | 5 | |||
| Overcurrent turn-off delay | TD_OC | 70 | ns | GATE=1nF | 5 | ||
| Frequency shuffle period | T(shuffle) | 32 | ms | 5 | |||
| Burst mode operating frequency | FBust | 22 | KHz | 5 | |||
| Constant-current control source current (SEL) | ICC_SEL_Source | 20 | uA | 5 | |||
| Short-circuit protection SEL voltage threshold | VCC_SLP_SEL | 0.7 | V | 5 | |||
| Short-circuit protection delay time | TCC_Short_SEL | 210 | ms | 5 | |||
| Over-temperature shutdown | TSD | 165 | oC | 5 | |||
| Over-temperature recovery | TRC | 140 | oC | 5 | |||
| GATE output low level | VOL | 1 | V | Igate_sink=20mA | 5 | ||
| GATE output high level | VOH | 7.5 | V | Igate_source=20mA | 5 | ||
| GATE output high clamp level | VG_Clamp | 13 | V | VDD=24V | 5 | ||
| GATE output rise time | T_r | 150 | ns | GATE=1nF | 5 | ||
| GATE output fall time | T_f | 60 | ns | GATE=1nF | 5 |
CAD (KiCad official)
- Symbol:
U8700 - Footprint:
Package_TO_SOT_SMD:SOT-23-6 - 3D model: SOT-23-6L, generated from the KiCad footprint (body from the F.Fab outline, terminals on the pads, 1.15 mm tall, datasheet A, midpoint of min and max). Neither the vendor nor KiCad ships a 3D model for this package, so the dimensions come from the datasheet drawing where it was read and are defaults otherwise (see provenance.model_3d_generated), not the manufacturer's CAD (STEP)
- 3D model files:
u8700-etched.step/u8700-etched.glbcarry the MPN laser-etched on the die in a toggleableAdom.LaserEtchgroup (Fusion-ready);u8700.step/u8700.glbare the bare package body.
Provenance
Data extracted from the manufacturer datasheet, not a distributor listing:
- Datasheet: UNI-SEMIC datasheet (13 pp, sha256
042dbdba3ab7d7a1, retrieved 2026-11-12, tier: lcsc) - Datasheet language: Chinese. Pin names, descriptions, and specs on this page were extracted and translated to English by ds2sf; the linked PDF is the manufacturer original.
- Extractor: parts-factory
2.0.0/extract_pins 0.3, primaryclaude-haiku-5-5(text), consensusclaude-sonnet-5-5(agreed), guards: pin_guards 0.1: passed. Pins are checked against the footprint pad set and their cited datasheet pages before publish. - CAD: KiCad official libraries (CC-BY-SA 4.0).