main
Download ZIP Propose a change
Generated by kicad-footprint-generator · KiCad file format 20260206
Name Last commit message Last updated
docs Publish 0.1.0 · Ray
viewers u8700: viewers rendered from the public page · Ray
package.json Publish 0.1.0 · Ray
page.json Set visibility: public · Ray
README.md Publish 0.1.0 · Ray
u8700-etched.glb Publish 0.1.0 · Ray
u8700-etched.step u8700: factory component page (tier=lcsc) · Ray
u8700-hero.glb u8700: hero GLB from the etched model (keeps the MPN mark) · Ray
u8700-hero.overlay.json u8700: hero GLB from the etched model (keeps the MPN mark) · Ray
u8700.glb Publish 0.1.0 · Ray
u8700.kicad_mod Publish 0.1.0 · Ray
u8700.kicad_sym Publish 0.1.0 · Ray
u8700.lbr Publish 0.1.0 · Ray
u8700.step Publish 0.1.0 · Ray
verification.json Verified: Published by the parts factory: tier lcsc, 6 pins · Ray

U8700

UNI-SEMIC · AC-DC Controllers And Regulators · SOT-23-6L

U8700 from UNI-SEMIC, in a SOT-23-6L. Pinout and pin descriptions extracted from the manufacturer datasheet (extract_pins, cross-checked by a second model). Symbol, footprint, and 3D from KiCad-official CAD.

Pinout

Pin Name Type Function
1 GND power_in Chip ground pin.
2 FB input Feedback input; in closed loop it connects to the optocoupler, and its voltage sets the PWM drive duty cycle and the CS turn-off voltage.
3 SEL input Multiplexed function pin: in constant-current/constant-voltage output applications a 10-47nF capacitor to GND is recommended, and in constant-voltage output applications it is left floating.
4 CS input Current sense input pin.
5 VDD power_in Chip power supply pin.
6 GATE output Totem-pole driver output that connects to the external MOSFET.

Key specifications

Parameter Value
Manufacturer UNI-SEMIC
Package SOT-23-6L
Category Power Management (PMIC)
Pins 6

Electrical characteristics

Limits as printed in the datasheet (page.json metadata.characteristics carries them as data).

Parameter Symbol Min Typ Max Unit Conditions Page
VDD DC supply voltage VDD 30 V 4
VDD DC clamp current 10 mA 4
FB, CS, SEL voltage -0.3 7 V 4
Storage temperature range -65 150 °C 4
Maximum junction temperature 175 °C 4
Soldering temperature (soldering, 10 s) 260 °C 10 s 4
ESD human body model 4 kV 4
ESD machine model 500 V 4
VDD supply voltage (recommended) VDD 10 26 V 4
Operating ambient temperature -40 85 °C 4
VDD turn-on voltage VDD_ON 19 21 21.5 V 4
VDD turn-off voltage VDD_OFF 8 9 10 V 4
VDD OVP threshold VDD_OVP 29 31 33 V 4
VDD clamp voltage VDD_Clamp 33 35 37 V I(VDD) = 7 mA 4
VDD start-up current IVDD_st 2 20 uA 4
VDD operating current IVDD_Op 1.2 2 mA VFB=3V,GATE=1nF 4
VDD standby current IVDD_standby 0.6 1 mA 4
Overcurrent (Vcs max) threshold, constant-voltage mode Vcs(max) 0.97 1 1.03 V 5
Normal operating frequency FOSC 60 65 70 KHz 5
Frequency shuffle range ΔF(shuffle)/FOSC -4 4 % 5
Constant-current reference (SEL capacitor) VCC_Reg_SEL 194 200 206 mV 5
Maximum duty cycle DMAX 66.7 % 5
Junction-to-ambient thermal resistance (SOT23-6) 250 °C/W 4
FB open-circuit voltage VFB_Open 5.9 V 4
FB short-circuit current IFB_Short 0.3 mA FB short 4
FB input impedance ZFB_IN 20 KΩ 4
PWM gain ΔVFB/ΔVCS 2 V/V 5
Burst (skip) FB voltage threshold Vskip 1 V 5
Overload protection FB voltage threshold VTH_OLP 3.6 V 5
Overload protection delay time TD_OLP 75 ms SEL floating 5
Leading-edge blanking TLEB 250 ns 5
Overcurrent turn-off delay TD_OC 70 ns GATE=1nF 5
Frequency shuffle period T(shuffle) 32 ms 5
Burst mode operating frequency FBust 22 KHz 5
Constant-current control source current (SEL) ICC_SEL_Source 20 uA 5
Short-circuit protection SEL voltage threshold VCC_SLP_SEL 0.7 V 5
Short-circuit protection delay time TCC_Short_SEL 210 ms 5
Over-temperature shutdown TSD 165 oC 5
Over-temperature recovery TRC 140 oC 5
GATE output low level VOL 1 V Igate_sink=20mA 5
GATE output high level VOH 7.5 V Igate_source=20mA 5
GATE output high clamp level VG_Clamp 13 V VDD=24V 5
GATE output rise time T_r 150 ns GATE=1nF 5
GATE output fall time T_f 60 ns GATE=1nF 5

CAD (KiCad official)

  • Symbol: U8700
  • Footprint: Package_TO_SOT_SMD:SOT-23-6
  • 3D model: SOT-23-6L, generated from the KiCad footprint (body from the F.Fab outline, terminals on the pads, 1.15 mm tall, datasheet A, midpoint of min and max). Neither the vendor nor KiCad ships a 3D model for this package, so the dimensions come from the datasheet drawing where it was read and are defaults otherwise (see provenance.model_3d_generated), not the manufacturer's CAD (STEP)
  • 3D model files: u8700-etched.step / u8700-etched.glb carry the MPN laser-etched on the die in a toggleable Adom.LaserEtch group (Fusion-ready); u8700.step / u8700.glb are the bare package body.

Provenance

Data extracted from the manufacturer datasheet, not a distributor listing:

  • Datasheet: UNI-SEMIC datasheet (13 pp, sha256 042dbdba3ab7d7a1, retrieved 2026-11-12, tier: lcsc)
  • Datasheet language: Chinese. Pin names, descriptions, and specs on this page were extracted and translated to English by ds2sf; the linked PDF is the manufacturer original.
  • Extractor: parts-factory 2.0.0 / extract_pins 0.3, primary claude-haiku-5-5 (text), consensus claude-sonnet-5-5 (agreed), guards: pin_guards 0.1: passed. Pins are checked against the footprint pad set and their cited datasheet pages before publish.
  • CAD: KiCad official libraries (CC-BY-SA 4.0).

Datasheet PDF